1/2" Connectors

21 products

  • FALSE LOC-LINE 59865 1/2" NPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59865 1/2" NPT Connector for 1/2" System, Pack of 50

    19 in stock

    LOC-LINE 59865 1/2" NPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    19 in stock

    $59.41

  • FALSE LOC-LINE 51805 1/2" NPT Connector for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 51805 1/2" NPT Connector for 1/2" System, Pack of 4

    13 in stock

    LOC-LINE 51805 1/2" NPT Connector - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    13 in stock

    $6.01

  • FALSE LOC-LINE 51804 3/8" NPT Connector for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 51804 3/8" NPT Connector for 1/2" System, Pack of 4

    12 in stock

    LOC-LINE 51804 3/8" NPT Connector - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    12 in stock

    $6.01

  • FALSE LOC-LINE 59877 1/2" BSPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59877 1/2" BSPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 59877 1/2" BSPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $59.41

  • Low stock! FALSE LOC-LINE 59876 3/8" BSPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59876 3/8" BSPT Connector for 1/2" System, Pack of 50

    1 in stock

    LOC-LINE 59876 3/8" BSPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    1 in stock

    $59.41

  • FALSE LOC-LINE 51827 1/2" BSPT Connector for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 51827 1/2" BSPT Connector for 1/2" System, Pack of 4

    13 in stock

    LOC-LINE 51827 1/2" BSPT Connector - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    13 in stock

    $6.01

  • FALSE LOC-LINE 51826 3/8" BSPT Connector for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 51826 3/8" BSPT Connector for 1/2" System, Pack of 4

    17 in stock

    LOC-LINE 51826 3/8" BSPT Connector - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    17 in stock

    $6.01

  • FALSE LOC-LINE 59877-G GRAY - 1/2" BSPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59877-G GRAY - 1/2" BSPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 59877-G GRAY -1/2" BSPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $59.41

  • FALSE LOC-LINE 59877-BLK BLACK - 1/2" BSPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59877-BLK BLACK - 1/2" BSPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 59877-BLK BLACK - 1/2" BSPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $59.41

  • FALSE LOC-LINE 59876-G GRAY - 3/8" BSPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59876-G GRAY - 3/8" BSPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 59876-G GRAY - 3/8" BSPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $59.41

  • FALSE LOC-LINE 59876-BLK BLACK - 3/8" BSPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59876-BLK BLACK - 3/8" BSPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 59876-BLK BLACK - 3/8" BSPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $59.41

  • FALSE LOC-LINE 59865-G GRAY -1/2" NPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59865-G GRAY -1/2" NPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 59865-G GRAY -1/2" NPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $59.41

  • Low stock! FALSE LOC-LINE 59865-BLK BLACK - 1/2" NPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59865-BLK BLACK - 1/2" NPT Connector for 1/2" System, Pack of 50

    1 in stock

    LOC-LINE 59865-BLK BLACK - 1/2" NPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    1 in stock

    $59.41

  • FALSE LOC-LINE 57864 Acid Resistant 3/8" NPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 57864 Acid Resistant 3/8" NPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 57864 Acid Resistant 3/8" NPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $74.25

  • FALSE LOC-LINE 56805 Acid Resistant 1/2" NPT Connector for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 56805 Acid Resistant 1/2" NPT Connector for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 56805 Acid Resistant 1/2" NPT Connector - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $7.48

  • FALSE LOC-LINE 56804 Acid Resistant 3/8" NPT Connector for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 56804 Acid Resistant 3/8" NPT Connector for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 56804 Acid Resistant 3/8" NPT Connector - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $7.48

  • FALSE LOC-LINE 57865 Acid Resistant 1/2" NPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 57865 Acid Resistant 1/2" NPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 57865 Acid Resistant 1/2" NPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $74.25

  • Low stock! FALSE LOC-LINE 51895 1/2" Fixed Mount for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 51895 1/2" Fixed Mount for 1/2" System, Pack of 2

    5 in stock

    LOC-LINE 51895 1/2" Fixed Mount - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    5 in stock

    $6.15

  • Low stock! FALSE LOC-LINE 59896 1/2" Fixed Mount for 1/2" System, Pack of 20

    LOC-LINE LOC-LINE 59896 1/2" Fixed Mount for 1/2" System, Pack of 20

    5 in stock

    LOC-LINE 59896 1/2" Fixed Mount - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    5 in stock

    $51.98

  • Low stock! FALSE LOC-LINE 59896-BLK BLACK - 1/2" Fixed Mount for 1/2" System, Pack of 20

    LOC-LINE LOC-LINE 59896-BLK BLACK - 1/2" Fixed Mount for 1/2" System, Pack of 20

    4 in stock

    LOC-LINE 59896-BLK BLACK - 1/2" Fixed Mount - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    4 in stock

    $51.98

  • FALSE LOC-LINE 59896-G GRAY -1/2" Fixed Mount for 1/2" System, Pack of 20

    LOC-LINE LOC-LINE 59896-G GRAY -1/2" Fixed Mount for 1/2" System, Pack of 20

    Online special order

    LOC-LINE 59896-G GRAY -1/2" Fixed Mount - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $51.98

Login

Forgot your password?

Don't have an account yet?
Create account