FEATURES
Patented tip design marks MCM wire up to 3/4" ø quickly, effectively, as well as smaller AWG wire (U.S. Patent No. 7,320,553)
New, resilient polyester tip lasts longer
Marks adhere to clean sheath permanently and resist handling, abrasion, and heat
10 times more mileage, 20% lower cost than vinyl tape
Greenlabel® paint has a lower environmental impact than vinyl tape
Re-use and recycle by remarking wire remnants
TYPICAL USES
Marking of MCM Wire
Color coding and identification of circuits, computer CAT-5 cables, and automotive wires
Coding of telephone wires and coaxial cables
Marking HDMI and audio/video cables
SPECIFICATIONS
Style
Valve Activated
Dimensions
6.25" L x 1" Ø (158 x 25 mm.)
Drying Time
Approx. 90 sec.
Marking Temp Range
0° to 110° Fahrenheit (-18° to 44° C)
Box/Case Quantity
6 ea. per box / 72 ea. per case
U-PHASE LARGE OPTIONS
Vendor Part #
Colour
10701MCM
Black
10702MCM
Blue
10703MCM
Green
10704MCM
Red
10705MCM
White
10706MCM
Yellow
10707MCM
Orange
10715MCM
Brown
10717MCM
Gray
RESOURCES
U-PhaseMCM_SDS_PDF
U-PhaseMCM_SpecSheet_PDF
UPhaseMCM_Brochure_PDF
FEATURES
The patented design is the result of a lot of hard work and ingenuity (U.S. Patent No. 7,320,553)
10 times more mileage than vinyl tape, at 20% lower cost
Faster, easier to apply and handle
No need to purchase and carry color specific wire when you can quickly mark wire remnants.
Marks up to #6 AWG Wire (7mm) quickly and efficiently with highly visible, quick-drying paint. Resists abrasion, moisture, dirt, oil and UV light. Adheres to clean sheath permanently.
Pass electrical inspections the first time by properly identifying all wire color.
Perfect for phasing of electrical panels, color coding, identifying and wiring circuits, marking computer and telephone cables, automotive wires, etc.
TYPICAL USES
Phasing of electrical panels.
Color coding and identification of circuits.
CAT-5 ethernet cable.
HDMI and audio/video cable.
Automotive wire.
SPECIFICATIONS
Style
Valve Activated
Dimensions
5" L x 0.63" Ø (145 x 16 mm.)
Drying Time
Approx. 90 sec.
Marking Temp Range
0° to 110° Fahrenheit (-18° to 44° C)
Box/Case Quantity
4 ea. per box / 96 ea. per case
U-PHASE WIRE OPTIONS
Vendor Part #
Colour
10701PPM
Black
10702PPM
Blue
10703PPM
Green
10704PPM
Red
10705PPM
White
10706PPM
Yellow
10707PPM
Orange
10711PPM
Pink
10712PPM
Violet
10715PPM
Brown
10717PPM
Gray
RESOURCES
U-Phase_SDS_PDF
U-Phase_SpecSheet_PDF
U-Phase_Brochure_PDF
U-Phase_CatalogPage_PDF
FEATURES
DR. PAINT makes highly visible, opaque, rain and fade resistant marks on glass, metals, plastics,ceramics, canvas, posters etc.
A cost effective way to promote sales and advertising products, DR. PAINT is ideal for auto dealers, auctions, restaurants, shops, artists, sport fans, and has many hobby and crafts applications.
Removes from glass with using ammonia based cleaners such as Windex® and 409®*.
Perfect for signs, posters, banners and canvas.
*Windex® is a Register Trademark of S.C. Johnson. Formula 409® is a Registered Trademark of The Clorox Company.
TYPICAL USES
Removable yet water resistant marking of glass windows (autos, shops, etc.).
Permanent marking on canvas, posters, wood, plastic signs, stone, rubber and more.
Perfect for Auto Dealers, Restaurants/Shops, Sport Fans, Crafts and Hobby, Artists, and more.
SPECIFICATIONS
Style
Valve Activated
Dimensions
6.25" L x 1" Ø (158 x 25mm.)
Drying Time
Approx. 150 sec.
Marking Temp Range
34° to 130° Fahrenheit (2° to 54° C)
Box/Case Quantity
6 ea. per box / 72 ea. per case
DR PAINT EXTRA BROAD OPTIONS
Vendor Part #
Colour
10881
Black
10882
Blue
10883
Green
10884
Red
10885
White
10886
Yellow
10887
Orange
10891
Pink
10876
College Blue
10877
College Green
10878
College Burgundy
10879
Teal
10890
Metallic Silver
10894
Metallic Gold
10895
Metallic Blue
10896
Metallic Green
10897
Metallic Pink
RESOURCES
DrPaint-DrPaintRT_SDS_PDF
DrPaintMet-DrPaintRTMet_SDS_PDF
DrPaint_SpecSheet_PDF
DrPaintMetallics_SpecSheet_PDF
DrPaint_CatalogPage_PDF
DrPaintEB_RetailBrochure_PDF
DrPaint_Brochure_PDF
ES_DRPAINT_FDS_PDF
FR_DRPAINT_FS_PDF
FEATURES
DR. PAINT makes highly visible, opaque, rain and fade resistant marks on glass, metals, plastics,ceramics, canvas, posters etc.
A cost effective way to promote sales and advertising products, DR. PAINT is ideal for auto dealers, auctions, restaurants, shops, artists, sport fans, and has many hobby and crafts applications.
Removes from glass with using ammonia based cleaners such as Windex® and 409®*.
Perfect for signs, posters, banners and canvas.
Now available with Label Guard™ Antimicrobial Label Coating.
*Windex® is a Register Trademark of S.C. Johnson. Formula 409® is a Registered Trademark of The Clorox Company.
TYPICAL USES
Removable yet water resistant marking of glass windows (autos, shops, etc.).
Permanent marking on canvas, posters, wood, plastic signs, stone, rubber and more.
Perfect for Auto Dealers, Restaurants/Shops, Sport Fans, Crafts and Hobby, Artists, and more.
SPECIFICATIONS
Style
Valve Activated
Dimensions
5.38" L x 0.63" Ø (136 x 16mm.)
Drying Time
Approx. 150 sec.
Marking Temp Range
34° to 130° Fahrenheit (2° to 54° C)
RESOURCES
DrPaint-DrPaintRT_SDS_PDF
DrPaintMet-DrPaintRTMet_SDS_PDF
DRPaintRT_SpecSheet_PDF
DrPaintRT_RetailBrochure_PDF
FEATURES
Marks are removable with alkaline detergents with a ph of 10 or higher, or with Windex®*.
After removal, marks leave no ghosting, bleed through, or adverse effects on metal's coatings, so that parts can be primed and painted without adverse effects.
Fast-drying paint formula leaves highly visible, water-resistant marks.
* Windex® is a registered trademark of S.C. Johnson & Son, Inc.
TYPICAL USES
Detergent Removable formula for temporary marking of metals, glass, plastic parts, assemblies, and tools.
Marking of work-in-progress inventory and finished parts.
Inspection and witness marks, quality control and coding applications, process identification.
Marking of metals and glass whenever mark should be easily removed.
SPECIFICATIONS
Style
Valve Activated
Dimensions
5.69" L x 0.56" Ø (144 x 14 mm.)
Drying Time
Approx. 20 sec.
Marking Temp Range
-50 ̊ to 150 ̊ Fahrenheit (-45 ̊ to 65 ̊ C)
Box/Case Quantity
12 ea. per box / 144 ea. per case
DETERGENT REMOVABLE OPTIONS
Vendor Part #
Colour
10401
Black
10402
Blue
10403
Green
10404
Red
10405
White
10406
Yellow
RESOURCES
DrMark_SDS_PDF
DrMark_SpecSheet_PDF
DrMark_CatalogPage_PDF
ES_DRMARK_DRMARKHD_FDS_PDF
FR_DRMARK_DRMARKHD_FS_PDF
FEATURES
Wet erase ink is removable from metals and glass with a damp cloth, without leaving a halo..
Marks are highly visible and easily removable.
For use is assembly plants, Q.C. operations, repair shops and metal fabrication.
5/8" ø aluminum body holds 30% more ink that standard markers.
TYPICAL USES
Temporary marking of metals, glass, plastic parts, assemblies and tools.
Marking of work-in-progress and finished parts.
Inspection and witness marks, quality control and coding applications, process identification.
SPECIFICATIONS
Style
Reversible Tip
Dimensions
5.63" L x 0.63" Ø (142 x 16 mm.)
Drying Time
Approx. 40 sec.
Marking Temp Range
-50 ̊ to 150 ̊ Fahrenheit (-45 ̊ to 65 ̊ C)
Box/Case Quantity
12 ea. per box / 144 ea. per case
WET ERASE OPTIONS
Vendor Part #
Colour
10442
Blue
10443
Green
RESOURCES
EZOFF_SDS_PDF
EZOFF_SpecSheet_PDF
EZOFF_CatalogPage_PDF
FEATURES
Auto factories worldwide use U-Mark temporary markers to identify work-in-process parts and inventory, or mark re-work items. Tips and paints have been designed to work on metal surfaces without affecting removability or the surface being marked.
Can be used on wet and oily metal surfaces in assembly, stamping and metal fabrication.
Marks are removable in a water bath and do not leave a halo, bleed through or ghost when the cleaned surface is primed or painted.
Cap is easy to remove even while wearing gloves.
TYPICAL USES
Temporary marking of metals, glass, plastic parts, assemblies and tools.
Marking of work-in-progress and finished parts.
Inspection and witness marks, quality control and coding applications, process identification.
Marking of metals and glass whenever mark should be easily removed.
SPECIFICATIONS
Style
Reversible Tip
Dimensions
5.63" L x 0.63" Ø (142 x 16 mm.)
Drying Time
Approx. 45 sec.
Box/Case Quantity
12 ea. per box / 144 ea. per case
WASHOFF OPTIONS
Vendor Part #
Colour
10451
Black
10452
Blue
10453
Green
10454
Red
10455
White
10456
Yellow
RESOURCES
Washoff_SDS_PDF
Washoff_SpecSheet_PDF
Washoff_CatalogPage_PDF
ES_Washoff_FDS_PDF
FR_Washoff_FS_PDF
FEATURES
Marks are visible only under an ultraviolet black Light.
Allows for invisible marking of parts for theft protection, quality control, and security.
Marks on metals, plastic, glass, and other non-porous surfaces.
Discreet marking of property, equipment and parts.
Q.C. marking in assembly, rental and construction applications.
TYPICAL USES
Discreet marking of property, equipment and parts.
Warranty, identification and security marking.
SPECIFICATIONS
Style
Valve Activated
Dimensions
5.69" L x 0.56" Ø (144 x 14 mm.)
Drying Time
Approx. 30 sec.
Marking Temp Range
-50 ̊ to 150 ̊ Fahrenheit (-45 ̊ to 65 ̊ C)
Box/Case Quantity
12 ea. per box / 144 ea. per case