Loc-Line 1/2"

232 products

  • FALSE LOC-LINE 59877 1/2" BSPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59877 1/2" BSPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 59877 1/2" BSPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $59.41

  • Low stock! FALSE LOC-LINE 59873 3/8" SAE Flare Nut for 1/2" System for 1/2" System, Pack of 20

    LOC-LINE LOC-LINE 59873 3/8" SAE Flare Nut for 1/2" System for 1/2" System, Pack of 20

    4 in stock

    LOC-LINE 59873 3/8" SAE Flare Nut for 1/2" System - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    4 in stock

    $32.41

  • Low stock! FALSE LOC-LINE 59870 1/2" to 1/4" Y Reducer - Pack of 20

    LOC-LINE LOC-LINE 59870 1/2" to 1/4" Y Reducer - Pack of 20

    2 in stock

    LOC-LINE 59870 1/2" to 1/4" Y Reducer - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    2 in stock

    $62.38

  • FALSE LOC-LINE 59863 1/2" Round Nozzle for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 59863 1/2" Round Nozzle for 1/2" System, Pack of 50

    24 in stock

    LOC-LINE 59863 1/2" Round Nozzle - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    24 in stock

    $59.41

  • FALSE LOC-LINE 59861 1/2" 50 Foot Coil for 1/2" System

    LOC-LINE LOC-LINE 59861 1/2" 50 Foot Coil for 1/2" System

    28 in stock

    LOC-LINE 59861 1/2" 50 Foot Coil Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    28 in stock

    $415.81

  • Low stock! FALSE LOC-LINE 59860 1/2" Hose Segments (59pc) Bulk 25 ft for 1/2" System

    LOC-LINE LOC-LINE 59860 1/2" Hose Segments (59pc) Bulk 25 ft for 1/2" System

    4 in stock

    LOC-LINE 59860 1/2" Hose Segments (59pc) Bulk 25 ft Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    4 in stock

    $207.91

  • Low stock! FALSE LOC-LINE 59859 1/2"- 5 Foot Coil for 1/2" System

    LOC-LINE LOC-LINE 59859 1/2"- 5 Foot Coil for 1/2" System

    6 in stock

    LOC-LINE 59859 1/2"- 5 Foot Coil Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    6 in stock

    $49.41

  • Low stock! FALSE LOC-LINE 51895 1/2" Fixed Mount for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 51895 1/2" Fixed Mount for 1/2" System, Pack of 2

    5 in stock

    LOC-LINE 51895 1/2" Fixed Mount - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    5 in stock

    $6.15

  • Low stock! FALSE

    LOC-LINE LOC-LINE 51849 1/2" Nozzle-Rama Pack for 1/2" System, 1 of each (16 Nozzles)

    1 in stock

    LOC-LINE 51849 1/2" Nozzle-Rama Pack - 1 of each (16 Nozzles) Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    1 in stock

    $36.39

  • Low stock! FALSE

    LOC-LINE LOC-LINE 51846 1/2" Magnetic Base for 1/2" System

    2 in stock

    LOC-LINE 51846 1/2" Magnetic Base Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    2 in stock

    $17.19

  • Low stock! FALSE LOC-LINE 51845 2-1/2" Swivel Nozzle 75, Pack of 2

    LOC-LINE LOC-LINE 51845 2-1/2" Swivel Nozzle 75, Pack of 2

    2 in stock

    LOC-LINE 51845 2-1/2" Swivel Nozzle 75 for 1/2" - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    2 in stock

    $13.17

  • FALSE

    LOC-LINE LOC-LINE 51844 1/2" Flat Nozzle Assortment Pack for 1/2" System

    Online special order

    LOC-LINE 51844 1/2" Flat Nozzle Assortment Pack Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $9.46

  • Low stock! FALSE

    LOC-LINE LOC-LINE 51838 1/2" End Cap for 1/2" System, Pack of 4

    4 in stock

    LOC-LINE 51838 1/2" End Cap - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    4 in stock

    $6.01

  • Low stock! FALSE LOC-LINE 51837 1/2" Circle Flow Nozzle Kit 1pc for 1/2" System

    LOC-LINE LOC-LINE 51837 1/2" Circle Flow Nozzle Kit 1pc for 1/2" System

    5 in stock

    LOC-LINE 51837 1/2" Circle Flow Nozzle Kit 1pc Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    5 in stock

    $26.65

  • FALSE LOC-LINE 51836 1/2" Side Flow Nozzle for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 51836 1/2" Side Flow Nozzle for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 51836 1/2" Side Flow Nozzle - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $9.98

  • FALSE LOC-LINE 51835 1/2" Extended Element Kit for 1/2" System

    LOC-LINE LOC-LINE 51835 1/2" Extended Element Kit for 1/2" System

    Online special order

    LOC-LINE 51835 1/2" Extended Element Kit Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $20.72

  • FALSE LOC-LINE 51834 1/2" Element Clamp for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 51834 1/2" Element Clamp for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 51834 1/2" Element Clamp - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $10.35

  • Low stock! FALSE LOC-LINE 51833 1/2" Extended Element for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 51833 1/2" Extended Element for 1/2" System, Pack of 4

    1 in stock

    LOC-LINE 51833 1/2" Extended Element - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    1 in stock

    $13.29

  • Low stock! FALSE LOC-LINE 39854 1/2" In-Line Valve for 1/2" System, Pack of 10

    LOC-LINE LOC-LINE 39854 1/2" In-Line Valve for 1/2" System, Pack of 10

    4 in stock

    LOC-LINE 39854 1/2" In-Line Valve - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    4 in stock

    $72.70

  • FALSE LOC-LINE 39853 1/2" Female NPT Valve for 1/2" System, Pack of 10

    LOC-LINE LOC-LINE 39853 1/2" Female NPT Valve for 1/2" System, Pack of 10

    25 in stock

    LOC-LINE 39853 1/2" Female NPT Valve - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    25 in stock

    $72.70

  • Low stock! FALSE LOC-LINE 39851 1/2" In-Line Check Valve for 1/2" System, Pack of 10

    LOC-LINE LOC-LINE 39851 1/2" In-Line Check Valve for 1/2" System, Pack of 10

    5 in stock

    LOC-LINE 39851 1/2" In-Line Check Valve - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    5 in stock

    $72.70

  • Sale -19%Low stock! FALSE LOC-LINE 32094 1/2" In-Line Valve for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 32094 1/2" In-Line Valve for 1/2" System, Pack of 2

    6 in stock

    LOC-LINE 32094 1/2" In-Line Valve - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    6 in stock

    $20.00$16.27

  • Low stock! FALSE LOC-LINE 32093 1/2" Female NPT Valve for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 32093 1/2" Female NPT Valve for 1/2" System, Pack of 2

    6 in stock

    LOC-LINE 32093 1/2" Female NPT Valve - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    6 in stock

    $16.27

  • Low stock! FALSE LOC-LINE 32091 1/2" In-Line Check Valve for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 32091 1/2" In-Line Check Valve for 1/2" System, Pack of 2

    2 in stock

    LOC-LINE 32091 1/2" In-Line Check Valve - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    2 in stock

    $16.27

Login

Forgot your password?

Don't have an account yet?
Create account