LOC-LINE 51828 1/4" 90 Degree Nozzle for 1/2" System - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 51822-1/2" to 1/4" Y Reducer - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 51821 1/2" to 1/4" Adapter - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 51806 1/4" Round Nozzle, 1/2" System - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49473 1/4" 45Deg Round Nozzle - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49454 1/4" Flat 7 Hole Nozzle - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49453 1/4" Flat 5 Hole Nozzle - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49451 1/4" Flat Slot 40 Nozzle - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49450 1/4" Swivel Nozzle 60 - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49449 1/4" Swivel Nozzle 40 - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49448 1/4" 4 Way Cross - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49446 1/4" Element Clamp - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49443 1/4" Side Flow Nozzle - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49441 1/4" 90 Degree Nozzle, 1/4" System - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49436 1/4" T Fitting - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49435 1/4" Elbow - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49434 1/4" SAE Flare Nut Adapter - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49432 3/8" Flare Nut Adapter for 1/4" System - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49431 1/4" Socket to 1/8" FNPT - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49429 1/4" Double Socket - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49428 - 1/4" Y Fitting - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49426 1/4" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49424 1/4" Round Nozzle, 1/4" System - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41481 1/4" Swivel Nozzle 40 - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
