Sakura of America

The Low Halogen Marker has a low chloride and low halogen solidified paint formula. This low chloride marker is ideal for environments where corrosion and metal fatigue are a concern. Low Halogen Marker contains less halogens (Br, Cl, F, I) and metal ingredients (Zn, Pb, Hg, Cu, Fe, S) meeting RDT F-7-3T requirements and is certified non-toxic. The 13 mm tip can be trimmed with a blade for finer marks. The handy applicator features an easy twist-up mechanism that keeps paint ready to use. The paint dries quickly in minutes, is waterproof, and fade and chemical resistant. The working temperature range is -40° to 212° F (-40° to 100° C), and is recommended for clean, dry surfaces. Alcohol based cleaners will remove marks from most non-porous surfaces. Possible applications include use on stainless steel, petrochemical and refineries, energy power plants, desalinization plants, transportation infrastructure and aerospace. Documentation concerning low chloride and low halogen content, and SDS sheets are available upon request. For the standard paint formula version of this marker, check out Solid Marker. Used for Ceramics Cloth and Fabric (non-washable) Concrete Glass Plastics and PVC ABS Rubber Stainless Steel/Low Corrosion Steel and Iron Wood Paper and Cardboard Technical Qualities Low chloride and low halogen paint formula Handy applicator marks smoothly from the first stroke Marks virtually any material or surface Highly permanent once dry Waterproof and fade resistant Mess free — no drips, pooling, or runs Fast drying – dries within minutes Fail proof – no tip that can clog or wear off Marks instantly – no shaking or pumping required to start Marks at any angle, upside down, or even underwater Dry-out resistant – recapped after use, paint remains fresh for a long time

Read more less

Solid Marker is a solidified paint in a marker form offered in both standard and slim sizes. It marks through dust, rust, water – inside or outside on smooth or rough surfaces. Dries within minutes and is permanent once dry. Solid Marker won’t fade or wash off like chalk. The twist mechanism keeps paint fresh and ready to use. Solid Marker features a tough, broad stroke, quick dry time, low odor and is non-toxic. This marker is widely used in commercial and industrial applications in construction, welding and fabrication, pipelines and drilling, assembly lines, automotive tires and windshields, HVAC, plumbing systems or with stencils. The 13 mm regular and 10 mm slim markers can both be trimmed with a knife for smaller marks. The Solid Marker is available in 11 colors including 3 fluorescent colors that offer higher visibility especially in low light conditions. Note: Alcohol-based cleaners will remove marks from most non-porous surfaces. Fluorescent colors reflect under UV light and offer higher visibility in low light conditions Used For Ceramics Cloth/Fabric Concrete Glass Plastics/PVC ABS Rubber Steel/Iron Wood Paper/Cardboard Technical Qualtities Handy applicator marks smoothly from the first stroke Marks virtually any material or surface Highly permanent once dry Waterproof and fade resistant on all 8 standard marker colors only. Fluorescent markers work best indoors as they are not U/V fast and are not fade resistant when exposed to sunlight Mess free — no drips, pooling, or runs Fast drying — dries within minutes Fail proof – no tip that can clog or wear off Marks instantly — no shaking or pumping required to start Marks at any angle, upside down, or even underwater Dry-out resistant — recapped after use, paint remains fresh for a long time SDS sheets available upon request  

Read more less

Solid Marker Low Temperature offered in both standard and slim sizes is a permanent solidified paint marker formulated for cold temperature environments. The tough marker for tough jobs, Solid Marker marks almost any surface, dry or wet, dusty, rusty or rough. This solidifed paint marker allows users to mark at any angle, sideways or upside down with no dripping. To advance, simply twist-up the Low Temperature (LT) marker or push the bottom of the Low Temperature Slim (LTS) marker. Solid Marker is ready for immediate use and marks smoothly from the start. The 13mm regular and 10mm slim tips can be trimmed with a blade for finer marks. Specifically formulated for cold temperatures, this marker works indoors or outdoors even when it is raining or snowing. The quick-drying formula dries permanently within 5 to 7 minutes.* Marks are waterproof (except on glass) and fade-resistant. Certified non-toxic, SDS sheets available upon request. *Note: marks may be removed from most non-porous surfaces with alcohol based solvents and scrubbing. Not waterproof on glass and will not work on wet glass.  Used For Ceramics Cloth and Fabric Concrete Glass Plastics and PVC ABS Rubber Steel and Iron Wood Paper and Cardboard Fiberglass and Concrete Technical Qualities Operates in cold temperatures as low as -40°F Handy applicator marks smoothly from the first stroke Marks virtually any material or surface Highly permanent once dry Waterproof** and fade resistant Mess free – no drips, pooling, or runs Fast drying – dries within minutes Fail proof – no tip that can clog or wear off Marks instantly – no shaking or pumping required to start Marks at any angle, upside down, or even underwater Dry-out resistant – recapped after use, paint remains fresh for a long time **except on glass

Read more less