Original Drill Dispenser Cabinets
HUOT HUOT 13652 Step Drill Dispenser, Fractional, Original Series
The Huot Step Drill Dispenser gives you plenty of organizational capacity in a compact, handy size.Store your step drills (and center drills if you use them) in tidy compartments that are each roomy enough to hold multiple bits. Use our pre printed labels or create your own using our pro label holder system (included) Adjacent compartments can hold additional step drills of the same size, different sizes, corresponding center drills, etc. Pre-labeled for 1/8″ to 1-3/8″ sizes
$226.15
HUOT HUOT 13140 POP DISPLAY Taps/Dies
Taps and dies counter display Holds these sizes: 1/8-27 NPT, 4-40 NC, 6-32 NC, 8-32 NC 10-24 NC, 10-32 NF, 12-24 NC, 1/4-20 NC *1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8-16 NC 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC 1/2-20 NF, 9/16-12 NC, 9/16-18 NF, 5/8-11 NC *5/8-18 NF, 3/4-10 NC, 3/4-16 NF, T-Handle Wrench 0 to 1/4″ All steel welded outer shell Clear, hinged polycarbonate front for high visibility and shatterproof durability Lockable with own set of two keys Steel drill gauge on top assures correct sizing of drills All compartments display drills vertically to use less counter space, and are rounded to make small drills readily accessible Attractive, bright red epoxy finish to enhance drill sales Compact, takes less counter space Makes excellent use of counter space for impulse sales
$407.09
HUOT HUOT 13420 #1 To #60 Reamers, 5 Drawer Cabinet
#1 to #60 reamers, 5 drawer dispenser Wire gauge sizes #1 to #60 Decimal equivalents also listed Ideal where compact space is a must 4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes One piece drawer slide Finished with tough epoxy powder coating
$226.15
HUOT HUOT 13167 1" To 1 1/2" Assorted, S&D Drills
S&D Drills 1″ to 1-1/2″ assorted Holds 2 each Reduced shank S/D bits From 1″, 1-1/32, 1-1/16, 1-1/8, 1-5/32, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating
$226.15
HUOT HUOT 13166 33/64" To 63/64" x 1/64ths, S&D Drills
S&D Drills 33/64″ to 63/64″ by 1/64ths Holds 2 each Reduced shank S/D bits From 33/64ths to 63/64ths by 64ths Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating
$226.15
HUOT HUOT 14100 Wall Mounted Original Dispenser Cabinet
Wall mounting with doors for up to 3 Original dispenser cabinets. Secure your inventory using wall mounted cabinet. Heavy 18 gauge prime steel powder coated in our exclusive Huot battleship gray powder. Holds up to 3 Original dispenser cabinets Locks using your own padlock Shipped KD and supplied with carriage bolts and nuts for easy assembly Provide protected storage for your valuable cutting tool inventory Wall mounted on 16″ centers using your own mounting hardware Dispensers sold separately
$235.28
HUOT HUOT 13590 Tap and Drill
Tap and drill dispenser, 6-32 #36 to 1/2″-20 #29/64Stores and organizes correct drill with corresponding size tap.Holds one dozen (minimum) of each sizeTAP DRILL6 – 32, #368 – 32, #2910 – 24, #2510 – 32, #211/4 – 20, #71/4 – 28, #35/16 – 18, F5/16 – 24, I3/8 – 16, 5/163/8 – 24, Q7/16 – 14, U7/16 – 20, 25/641/2 – 13, 27/641/2 – 20, 29/64Label holders on drawer fronts permit easy, quick identification and inventory checkOne-piece drawer slideStackable with other cutting tool storage cabinets to save spaceFinished with tough epoxy powder coatingADDITIONAL INFORMATION; Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in
$189.98
HUOT HUOT 13575 3mm to 24mm Metric Tap Dispenser
3mm to 24mm metric tap dispenserHolds 29 popular metric sizes:3 mm x .50, 3 mm x .60, 4 mm x .704 mm x .75, 5 mm x .80, 5 mm x .906 mm x 1.00, 6.3 mm x 1.00, 7 mm x 1.008 mm x 1.00, 8 mm x 1.25, 9 mm x .759 mm x 1.00, 9 mm x 1.25, 10 mm x 1.0010 mm x 1.25, 10 mm x 1.50, 11 mm x 1.5012 mm x 1.25, 12 mm x 1.50, 12 mm x 1.7514 mm x 1.25, 14 mm x 1.50, 14 mm x 2.0016 mm x 1.50, 16 mm x 2.00, 18 mm x 2.5020 mm x 2.50, 24 mm x 3.00StackableOne piece drawer slideFinished with tough epoxy powder coatingADDITIONAL DESCRIPTION; Weight 10.50 lbsDimensions 14.625 × 7.375 × 7.75 in
$189.98
HUOT HUOT 13550 2 56 thru 12 28 Tap Dispenser
2-56 thru 12-28 tap dispenserEach size holds taper, plug, bottoming, and spiral point taps60 compartmentsHolds machine screw sizes:2-56, 3-48, 3-56, 4-40, 4-485-40, 5-44, 6-32, 6-40, 8-328-36, 10-24, 10-32, 12-24, 12-28StackableOne piece drawer slideFinished with tough epoxy powder coatingADDITONAL; Weight 10.50 lbsDimensions 14.625 × 7.375 × 7.75 in
$213.49
HUOT HUOT 13500 1/4" 20 thru 1" 12 Tap Dispenser
1/4″-20 thru 1″-12 tap dispenser Holds popular fractional sizes: 1/4″-20 NC, 1/4″-28 NF, 5/16″-18 NC, 5/16″-24 NF 3/8″-16 NC, 3/8″-24NF, 7/16″-14 NC, 7/16″-20 NF 1/2″-13 NC, 1/2″-20 NF, 9/16″-12 NC, 9/16″-18 NF 5/8″-11 NC, 5/8″-18NF, 3/4″-10 NC, 3/4″-16 NF 7/8″-9 NC, 7/8″-14 NF, 1″-8 NC, 1″-12 NF Stackable One piece drawer slide Finished with tough epoxy powder coating
$171.86
HUOT HUOT 13025 #1 To #60 Wire Gage Drills, Jobbers Length
#1 to #60 wire gage drills, jobbers length• Holds full packages of each size (12 pc. Min.)• Stackable for larger inventories• One piece drawer slide for long useful life• Decimal equivalentsAdditional: Weight Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in
$199.02
HUOT HUOT 13030 #1 To #60 Wire Gage Drills, Stub Screw/Machine Length
#1 to #60 wire gage drills, stub screw machine length Holds full packages of each size (12 pc. Min.) *Stackable for larger inventories. *One piece drawer slide for long useful life. *Decimal equivalents. *Marked for screw machine length to help control inventory.
$217.11
HUOT HUOT 13040 #1 To #80 Wire Gage Drills, Jobbers Length
#1 to #80 wire gage drills, jobbers length• Holds full packages of each size (12 pc. Min.)• Stackable for larger inventories• One piece drawer slide for long useful life• Decimal equivalentsAddtional; Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in
$244.24
HUOT HUOT 13570 Counterbore Dispenser Cabinet, Original
Counterbore Dispenser, Original All steel cabinet with vinyl drawer dividers to help protect and separate counterbores. Stackable with all Huot “Original” style dispensers. Holds continuous pilot counterbores sizes #4, #5, #6,#8, #10, #12, ¼”, 5/16”, 3/8”, 7/16”, & ½”.
$226.15
HUOT HUOT 13560 NPT Dispenser
NPT dispenser Holds all sizes of National Pipe Taps (NPT) from 1/16” to 2” Top drawer has 13 compartments; 2 for 1/16” – 27, 2 for 1/8” – 27, 3 for 1/4” – 18, 3 for 3/8” – 18, 3 for 1/2” – 14, Middle drawer has 6 compartments – 3 for 3/4” – 14, 2 for 1” – 11-1/2”, and 1 oversized compartment for 1-1/4” – 11-1/2” Bottom drawer has 2 oversized compartments – 1 for 1-1/2” – 11-1/2”, and 1 for 2” – 11-1/2” Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating
$199.02
HUOT HUOT 13132 POP Counter Display for Jobber Drills - BLUE
1/16″ to 1/2″ x 64ths counter display for jobbers drills All steel welded outer shell Clear, hinged polycarbonate front for high visibility and shatterproof durability Lockable with own set of two keys Steel drill gauge on top assures correct sizing of drills All compartments display drills vertically to use less counter space, and are rounded to make small drills readily accessible Attractive, Royal Blue finish (Red shown in photo) Compact, takes less counter space Makes excellent use of counter space for impulse sales
$360.03
HUOT HUOT 13090 Metric Stub 1mm to 6.9mm x 0.1mm Drills
1mm to 6.9mm by .1mm 1mm to 6.9mm by .1mm stub Holds full packages of each size – (12 pc. Min.) Stackable for larger inventories. One piece drawer slide for long useful life. Decimal equivalents.
$244.24
HUOT HUOT 13125 POP Counter Display for Jobber Drills
1/16″ to 1/2″ x 64ths counter display for jobbers drills All steel welded outer shell Clear, hinged polycarbonate front for high visibility and shatterproof durability Lockable with own set of two keys Steel drill gauge on top assures correct sizing of drills All compartments display drills vertically to use less counter space, and are rounded to make small drills readily accessible Attractive, bright red epoxy finish to enhance drill sales Compact, takes less counter space Makes excellent use of counter space for impulse sales
$360.03
HUOT HUOT 13200 Carbide Bur Dispenser, Popular Sizes
Carbide burr dispenser, popular sizes Holds the following sizes: Cylindrical 1/4″ x 5/8″, Cyl. Rad. End 1/4″ x 5/8″, Ball 1/4″ x 1/4″ Oval 1/4″ x 3/8″, Tree Rad. 1/4″ x 3/4″, Tree/Pointed 1/4″ x 3/4″ Cone/Rad. End 1/4″ x 5/8″, Cylindrical 3/8″ x 3/4″, Cyl./Rad. End 3/8″ x 3/4″ Ball 3/8″, Oval 3/8″ x 5/8″, Tree/Rad. End 3/8″ x 3/4″ Tree/Pointed 3/8″ x 3/4″, Cone/Rad. End 3/8″ x 1-1/16″, Cone/Flat End 1/4″ x 1″ Cone/Rad. End 1/2″ x 1-1/8″, Cone/Flat End 3/8″ x 1″, Cylindrical 1/2″ x 1″ Cyl./Rad. End 1/2″ x 1″, Ball 1/2″, Oval 1/2″ x 7/8″ Tree/Rad. End 1/2″ x 1″, Tree/Pointed 1/2″ x 1″, Cone/Flat End 1/2″ x 1″ One piece drawer slide Stackable Finished with tough epoxy powder coating
$188.14
HUOT HUOT 13415 A To Z Reamers
A to Z reamers, 3 drawer dispenser A to Z Reamers Decimal equivalents also listed Ideal where compact space is a must 4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes One piece drawer slide Finished with tough epoxy powder coating
$189.98
HUOT HUOT 13410 1/16" To 1/2" Reamers, 4 Drawer Cabinet
1/16″ to 1/2″ reamers, 4 drawer dispenser Fractional Reamers 1/16″ to 1/2″ by 64ths Decimal equivalents also listed Ideal where compact space is a must 4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes One piece drawer slide Finished with tough epoxy powder coating
$208.07
HUOT HUOT 13595 METRIC TAP/DRILL DISP.
Space saving combination dispenser The dispenser for metric taps, drills and dies. From 2.5 x .45 tap to 12.0 x 1.75 tap Top drawer holds: 2.5 x .45 tap – 2.05 drill, dies 3.0 x .50 tap – 2.50 drill; dies 3.5 x .60 tap – 2.90 drill, dies 4.0 x .70 tap – 3.30 drill, dies Room in top drawer for your T-handle wrench. Middle drawer holds: 5.0 x .80 tap – 4.20 drill, dies 6.0 x 1.0 tap – 5.0 drill, dies 8.0 x 1.25 tap – 6.70 drill, dies Bottom drawer holds: 10.0 x 1.50 tap – 8.50 drill, dies 12.0 x 1.75 tap – 10.20 drill, dies Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating
$199.02
HUOT HUOT 13425 1mm to 13mm By 0.5mm Reamer Dispenser
CNC Tool Tower for 40 taper tool holdersIndividual units are 3′ tall3 shelves – 24 toolholders per shelfNylon inserts protect each tool holderSturdy 16 gauge steel constructionTool Tower should be bolted to the floor for additional securityCasters should never be used on a stacked CNC Tower as this could be extremely dangerousAdditional: Weight 65 lbsDimensions 27.3125 × 18.3175 × 36 in
$208.07
HUOT HUOT 13650 Carbide Insert "Original" Series Dispenser
Carbide insert “original” series dispenserDesigned to keep inserts at each work centerCompact size keeps the most frequently used inserts within fingertip reachThree drawers have a moveable divider with a large fourth drawer to store tool holders and extra insertsLabel holders on drawer fronts permit easy, quick identification and inventory checkOne piece drawer slideStackable with other cutting tool storage cabinets to save spaceFinished with tough epoxy powder coating
$179.12