Nuco

19 products

  • Nuco GG-266 Intumescent Firestop Silicone

    Nuco Nuco GG-266 Intumescent Firestop Silicone

    Online special order

    Self-Seal® GG-266 is a single-component, neutral cure, non-slumping intumescent silicone caulk that is designed to seal combustible service penetrations in fire-rated walls and floors. When exposed to temperatures above 150°C (300°F), it will begin to expand. As the combustible penetrating item softens and collapses under fire conditions, the silicone composition will rapidly intumesce to fill the void with a patented char composite that contains expanded graphite. Features: Intumescent Silicone (expands when exposed to temperatures above 150°C (300°F)) Self-Seal GG-266 has achieved GREENGUARD GOLD Certification Non-sag silicone Water-resistant before, during, and after cure Freeze-thaw stable Protects your wall & floor openings Tested at positive pressure to simulate the pressure differentials that can occur in a fire situation Self-Seal GG-266 seals combustible service penetrations in fire and smoke rated wall or floor separations. Basic uses include firestopping: Up to 2” PVC, ABS, IPEX Aquarise, PEX, FRPP, and CPVC penetrations - only a minimum 5/16” annular space needed Up to 4” PVC, IPEX XFR 15-50 PVC, Royal Pipe HRS2550, ABS, and CPVC pipe penetrations through conical or cored openings in concrete floor slabs

    Online special order

    $27.12

  • Nuco 30248 NuFlex® 302 Bath & Kitchen Translucent

    Nuco Nuco 30248 NuFlex® 302 Bath & Kitchen Translucent

    Online special order

    NuFlex® 302 Bath & Kitchen Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. NuFlex® 302 Bath & Kitchen is uniquely formulated to resist mould and mildew when fully cured. NuFlex® 302 Bath & Kitchen has excellent adhesion to ceramics, tile board, laminates such as Corian® and Arborite® and most acrylics. NuFlex® 302 Bath & Kitchen has excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F). Features: Acetoxy cure Certified by NSF NuFlex 302 has achieved GREENGUARD GOLD Certification 100% silicone Water-resistant before, during, and after cure RTV (Room Temperature Vulcanization) Mildew resistant Wide temperature range performance 50-year durability Can be applied in sub-zero temperatures Bonds to: Metal Laminates Glass Wood Silicone resin Vulcanized silicone rubber Ceramic Natural and synthetic fibres Painted surfaces Most plastics Basic uses include caulking and sealing around: Bathtubs Shower stalls Bathroom vanities Kitchen counter and sinks Other uses include: Replacing ceramic tiles Gasket making for dishwasher doors Sealing inside refrigerators and freezers

    Online special order

    $9.11

  • Nuco 30245 NuFlex® 302 Bath & Kitchen Almond

    Nuco Nuco 30245 NuFlex® 302 Bath & Kitchen Almond

    Online special order

    NuFlex® 302 Bath & Kitchen Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. NuFlex® 302 Bath & Kitchen is uniquely formulated to resist mould and mildew when fully cured. NuFlex® 302 Bath & Kitchen has excellent adhesion to ceramics, tile board, laminates such as Corian® and Arborite® and most acrylics. NuFlex® 302 Bath & Kitchen has excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F). Features: Acetoxy cure Certified by NSF NuFlex 302 has achieved GREENGUARD GOLD Certification 100% silicone Water-resistant before, during, and after cure RTV (Room Temperature Vulcanization) Mildew resistant Wide temperature range performance 50-year durability Can be applied in sub-zero temperatures Bonds to: Metal Laminates Glass Wood Silicone resin Vulcanized silicone rubber Ceramic Natural and synthetic fibres Painted surfaces Most plastics Basic uses include caulking and sealing around: Bathtubs Shower stalls Bathroom vanities Kitchen counter and sinks Other uses include: Replacing ceramic tiles Gasket making for dishwasher doors Sealing inside refrigerators and freezers

    Online special order

    $9.11

  • Nuco 10086 SL-100 Self Seal SL 100 Limestone

    Nuco Nuco 10086 SL-100 Self Seal SL 100 Limestone

    Online special order

    Self-Seal® SL-100 is a single-component, low modulus, self-levelling silicone firestop sealant designed for floor applications. It forms a pressure-tight seal resistant to water, smoke and toxic gases; see Self-Seal® UL and cUL firestop systems for W (Water tightness) and L (Air Leakage) Ratings. The sealant is also resistant to cracking, ultraviolet radiation and ozone. Features: Self-levelling silicone Self-Seal SL-100 has achieved GREENGUARD GOLD Certification Water-resistant before, during, and after cure Freeze-thaw stable Protects your floor openings Tested at positive pressure to simulate the pressure differentials that can occur in a fire situation Basic uses include firestopping: Aluminium, pre-cast concrete and curtain wall systems. Thermally expanding pipes that are insulated at fire separations. Power/communication cables and aluminium/galvanized steel cable trays. Static / non-static pipes and conduits. Steel, Polyvinyl Chloride (PVC) sleeving or cored concrete openings.

    Online special order

    $41.47

  • Nuco 73400 UltraSeal PF-10 Foam Cleaner

    Nuco Nuco 73400 UltraSeal PF-10 Foam Cleaner

    Online special order

    UltraSeal® PF-10 Foam Cleaner is a cleaning solvent used to dissolve any uncured foam and adhesive foam from unwanted places. Uniquely designed for use with the Nuco dispensing guns. UltraSeal® PF-10 will work as well for general cleaning purposes. Features: Instantly dissolves uncured foam Helps maintain the foam guns performance Essential in gun maintenance Great for emergencies Attaches to a foam gun or can be used with a spray nozzle Can be reused over and over again. Basic uses include: Cleaning foam from clothing, tools, construction surfaces and much more Maintaining foam guns

    Online special order

    $14.82

  • Nuco 30241 NuFlex® 302 Bath & Kitchen White

    Nuco Nuco 30241 NuFlex® 302 Bath & Kitchen White

    10 in stock

    NuFlex® 302 Bath & Kitchen Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. NuFlex® 302 Bath & Kitchen is uniquely formulated to resist mould and mildew when fully cured. NuFlex® 302 Bath & Kitchen has excellent adhesion to ceramics, tile board, laminates such as Corian® and Arborite® and most acrylics. NuFlex® 302 Bath & Kitchen has excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F). Features: Acetoxy cure Certified by NSF NuFlex 302 has achieved GREENGUARD GOLD Certification 100% silicone Water-resistant before, during, and after cure RTV (Room Temperature Vulcanization) Mildew resistant Wide temperature range performance 50-year durability Can be applied in sub-zero temperatures Bonds to: Metal Laminates Glass Wood Silicone resin Vulcanized silicone rubber Ceramic Natural and synthetic fibres Painted surfaces Most plastics Basic uses include caulking and sealing around: Bathtubs Shower stalls Bathroom vanities Kitchen counter and sinks Other uses include: Replacing ceramic tiles Gasket making for dishwasher doors Sealing inside refrigerators and freezers

    10 in stock

    $9.11

  • Nuco 30240 NuFlex® 302 Bath and Kitchen Clear

    Nuco Nuco 30240 NuFlex® 302 Bath and Kitchen Clear

    Online special order

    NuFlex® 302 Bath & Kitchen Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. NuFlex® 302 Bath & Kitchen is uniquely formulated to resist mould and mildew when fully cured. NuFlex® 302 Bath & Kitchen has excellent adhesion to ceramics, tile board, laminates such as Corian® and Arborite® and most acrylics. NuFlex® 302 Bath & Kitchen has excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F). Features: Acetoxy cure Certified by NSF NuFlex 302 has achieved GREENGUARD GOLD Certification 100% silicone Water-resistant before, during, and after cure RTV (Room Temperature Vulcanization) Mildew resistant Wide temperature range performance 50-year durability Can be applied in sub-zero temperatures Bonds to: Metal Laminates Glass Wood Silicone resin Vulcanized silicone rubber Ceramic Natural and synthetic fibres Painted surfaces Most plastics Basic uses include caulking and sealing around: Bathtubs Shower stalls Bathroom vanities Kitchen counter and sinks Other uses include: Replacing ceramic tiles Gasket making for dishwasher doors Sealing inside refrigerators and freezers

    Online special order

    $9.11

  • Nuco 30209 NuFlex® 302 High Temp Red

    Nuco Nuco 30209 NuFlex® 302 High Temp Red

    Online special order

    NuFlex® 302 High-Temperature Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. NuFlex® 302 High-Temperature Silicone Sealant cures to form a sturdy, rubbery solid upon exposure to moisture in the air. NuFlex® 302 High Temperature is formulated to perform at temperatures ranging from -65° to 260°C (-85° to 500°F) under continuous operating conditions. During intermittent exposure, NuFlex® 302 High Temperature will withstand temperatures as high as 316°C (600°F). It is ideal for many sealing and bonding applications. Features: Acetoxy cure Certified by NSF (RED) 100% silicone Water-resistant before, during, and after cure RTV (Room Temperature Vulcanization) Adheres to many substrates Excellent extreme-temperature performance 50-year durability Can be applied in sub-zero temperatures Withstands up to 316°C (600°F) Bonds to: Metal Laminates Glass Wood Silicone resin Vulcanized silicone rubber Ceramic Natural and synthetic fibres Painted surfaces Most plastics Basic uses include caulking and sealing around: Form-in place gaskets where there is no oil contact Sealing and encapsulating heating elements in appliances Moving oven belts Industrial ovens and bag filters on smokestacks Other uses include: General repairs on a variety of substrates Critical bonding, sealing, potting, encapsulating and protective coatings where parts must perform at high temperatures

    Online special order

    $10.63

  • Nuco 30208 NuFlex® 302 General Purpose Translucent

    Nuco Nuco 30208 NuFlex® 302 General Purpose Translucent

    Online special order

    NuFlex® 302 General Purpose Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. NuFlex® 302 General Purpose Silicone Sealant cures to form a sturdy, rubbery solid upon exposure to moisture in the air. Due to its non-sag properties, the sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping, or running off. It adheres to most non-porous construction substrates. NuFlex® 302 has excellent resistance to weathering, vibration, moisture, ozone, and extreme temperatures. It may be applied in sub-zero temperatures without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F) Features: Acetoxy cure 100% silicone NuFlex 302 has achieved GREENGUARD GOLD Certification Certified by NSF Water-resistant before, during, and after cure RTV (Room Temperature Vulcanization) Adheres to many substrates Wide temperature range performance 50-year durability Can be applied in sub-zero temperatures Bonds to: Metal Laminates Glass Wood Silicone resin Vulcanized silicone rubber Ceramic Natural and synthetic fibres Painted surfaces Most plastics Basic uses include caulking and sealing around: Form-in place gaskets where there is no oil contact Duct joints Areas that need weather stripping Sinks, basins, showers, and tubs Other uses include: General repairs on a variety of substrates Non-load-bearing bonding Non-stick coating for concrete moulds and forms

    Online special order

    $8.79

  • Nuco 30201 NuFlex® 302 General Purpose White

    Nuco Nuco 30201 NuFlex® 302 General Purpose White

    Online special order

    NuFlex® 302 General Purpose Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. NuFlex® 302 General Purpose Silicone Sealant cures to form a sturdy, rubbery solid upon exposure to moisture in the air. Due to its non-sag properties, the sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping, or running off. It adheres to most non-porous construction substrates. NuFlex® 302 has excellent resistance to weathering, vibration, moisture, ozone, and extreme temperatures. It may be applied in sub-zero temperatures without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F) Features: Acetoxy cure 100% silicone NuFlex 302 has achieved GREENGUARD GOLD Certification Certified by NSF Water-resistant before, during, and after cure RTV (Room Temperature Vulcanization) Adheres to many substrates Wide temperature range performance 50-year durability Can be applied in sub-zero temperatures Bonds to: Metal Laminates Glass Wood Silicone resin Vulcanized silicone rubber Ceramic Natural and synthetic fibres Painted surfaces Most plastics Basic uses include caulking and sealing around: Form-in place gaskets where there is no oil contact Duct joints Areas that need weather stripping Sinks, basins, showers, and tubs Other uses include: General repairs on a variety of substrates Non-load-bearing bonding Non-stick coating for concrete moulds and forms

    Online special order

    $8.79

  • Nuco 30200 NuFlex® 302 General Purpose Clear

    Nuco Nuco 30200 NuFlex® 302 General Purpose Clear

    Online special order

    NuFlex® 302 General Purpose Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. NuFlex® 302 General Purpose Silicone Sealant cures to form a sturdy, rubbery solid upon exposure to moisture in the air. Due to its non-sag properties, the sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping, or running off. It adheres to most non-porous construction substrates. NuFlex® 302 has excellent resistance to weathering, vibration, moisture, ozone, and extreme temperatures. It may be applied in sub-zero temperatures without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F) Features: Acetoxy cure 100% silicone NuFlex 302 has achieved GREENGUARD GOLD Certification Certified by NSF Water-resistant before, during, and after cure RTV (Room Temperature Vulcanization) Adheres to many substrates Wide temperature range performance 50-year durability Can be applied in sub-zero temperatures Bonds to: Metal Laminates Glass Wood Silicone resin Vulcanized silicone rubber Ceramic Natural and synthetic fibres Painted surfaces Most plastics Basic uses include caulking and sealing around: Form-in place gaskets where there is no oil contact Duct joints Areas that need weather stripping Sinks, basins, showers, and tubs Other uses include: General repairs on a variety of substrates Non-load-bearing bonding Non-stick coating for concrete moulds and forms

    Online special order

    $8.79

  • Nuco 18001 NuFlex® 180 Siliconized Acrylic Sealant

    Nuco Nuco 18001 NuFlex® 180 Siliconized Acrylic Sealant

    Online special order

    NuFlex® 180 Siliconized Acrylic Sealant is a paintable siliconized acrylic latex. NuFlex® 180 has superior adhesion and strength thanks to its added silicone. It is an excellent all-purpose sealant for cracks and joints and exhibits good adhesion to the full range of construction substrates. Features: Paintable within 2-6 hours Mildew resistant once cured Excellent adhesion Easy application and clean-up Available in 162 mL squeeze tube & 300 mL cartridge Bonds to: Wood Concrete Metal Glass Stone Brick Stucco Marble Basic uses include: Sealing interior joints between walls and panels, around door frames and baseboards, and between bathroom fixtures and walls

    Online special order

    $6.73

  • Low stock! Nuco CG 620-AL Sausage Caulking Gun

    Nuco Nuco CG 620-AL Sausage Caulking Gun

    5 in stock

    NuFlex® 620 AL Sausage Gun is designed for large volume applications using 591 mL foil sausages. Made from high-quality steel, it will provide years of trouble-free service. Features: 591 mL foil sausage pack capacity Reusable Servicable / repairable

    5 in stock

    $115.08

  • Nuco Nuco 76010 Colorwise Snap-Tip Nozzles

    Online special order

    for PF-200/600 HFO - 1 pcs

    Online special order

    $5.95

  • Nuco  PF-200 2 Component Spray Foam Kit w/ Accessories

    Nuco Nuco PF-200 2 Component Spray Foam Kit w/ Accessories

    Online special order

    UltraSeal® PF-200, E-84 Class 1 is a self-contained, portable two-component polyurethane foam dispensing system that utilizes a non-flammable blowing agent and requires no outside power source. UltraSeal® PF-200, E-84 has been specifically formulated for flame retardancy and conforms to the requirements of ASTM E84 as a “Class 1” system. The foam helps to lower heating and cooling costs by drastically reducing energy consumption. The foam kits can assist in attaining an ENERGY STAR® rating and/or LEED Certification. CCMC # 13520-L (non-HFO formulation) (CAN/ULC-S711.2-05, Standard for Thermal Insulation - Bead-Applied Two-Component Polyurethane Air Sealant Foam). Test results pending for HFO formulation. UltraSeal® PF-200 tanks ship complete with a gun hose assembly and standard spray nozzles. Features: All-weather performance Quick curing Portable Medium density polyurethane foam UltraSeal PF-200/600 has achieved GREENGUARD GOLD Certification Repeated use CCMC # 13520-L (non-HFO formulation); test results pending for HFO formulation All-in-one kits Applies easily Basic uses include: Residential & industrial construction HVAC Cold storage Roofing Truck trailer Mobile home RV Bus Cottage restoration Pool & spa Sheds Garage Automobile Metal structures Landscaping Renovations Marine & flotation Asbestos abatement

    Online special order

    $784.73

  • Nuco Nuco CG235-3 Bulk Caulking Gun Nozzle

    Online special order

    For gun# CGDL45 T13

    Online special order

    $3.00

  • Low stock! Nuco CGDL45T13 NuFlex® Bulk Gun

    Nuco Nuco CGDL45T13 NuFlex® Bulk Gun

    3 in stock

    NuFlex® Bulk Gun is designed for large volume applications. The bulk gun has a capacity of 850 mL (28.8 Fl.oz). With proper maintenance and care, this gun is reusable indefinitely. Features: 850 mL bulk product capacity Reusable Servicable / repairable

    3 in stock

    $175.00

  • Nuco  PF-600 2 Component Spray Foam Kit w/ Accessories

    Nuco Nuco PF-600 2 Component Spray Foam Kit w/ Accessories

    Online special order

    UltraSeal® PF-600, E-84 Class 1 is a self-contained, portable two-component polyurethane foam dispensing system that utilizes a non-flammable blowing agent and requires no outside power source. UltraSeal® PF-600, E-84 has been specifically formulated for flame retardancy and conforms to the requirements of ASTM E84 as a “Class 1” system. The foam helps to lower heating and cooling costs by drastically reducing energy consumption. The foam kits can assist in attaining an ENERGY STAR® rating and/or LEED Certification. CCMC # 13520-L (non-HFO formulation) (CAN/ULC-S711.2-05, Standard for Thermal Insulation - Bead-Applied Two-Component Polyurethane Air Sealant Foam). Test results pending for HFO formulation. UltraSeal® PF-600 tanks ship complete with a gun hose assembly and standard spray nozzles. Features: All-weather performance Quick curing Portable Medium density polyurethane foam UltraSeal PF-200/600 has achieved GREENGUARD GOLD Certification Repeated use CCMC # 13520-L (non-HFO formulation); test results pending for HFO formulation All-in-one kits Applies easily Basic uses include: Residential & industrial construction HVAC Cold storage Roofing Truck trailer Mobile home RV Bus Cottage restoration Pool & spa Sheds Garage Automobile Metal structures Landscaping Renovations Marine & flotation Asbestos abatement

    Online special order

    $1,569.52

  • Nuco UltraSeal® G2 Foam Applicator Gun

    Nuco Nuco UltraSeal® G2 Foam Applicator Gun

    11 in stock

    UltraSeal® G2 Foam Applicator Gun is an economically priced single component gun foam applicator. Compatible with all UltraSeal® gun foams. Features: Semi-steel construction Foam control dial Economically priced Ergonomically correct Long-lasting

    11 in stock

    $49.00

Login

Forgot your password?

Don't have an account yet?
Create account