LOC-LINE 59865 1/2" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59864 3/8" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 51805 1/2" NPT Connector - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 51804 3/8" NPT Connector - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59877 1/2" BSPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59876 3/8" BSPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 51827 1/2" BSPT Connector - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 51826 3/8" BSPT Connector - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59877-G GRAY -1/2" BSPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59877-BLK BLACK - 1/2" BSPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59876-G GRAY - 3/8" BSPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59876-BLK BLACK - 3/8" BSPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59865-W White 1/2 NPT Connector Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59865-G GRAY -1/2" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59865-BLK BLACK - 1/2" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59864-W White - 3/8 NPT Connector Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59864-G GRAY - 3/8" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 59864-BLK BLACK - 3/8" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 57864 Acid Resistant 3/8" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 56805 Acid Resistant 1/2" NPT Connector - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 56804 Acid Resistant 3/8" NPT Connector - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 57865 Acid Resistant 1/2" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 51503 Replacement Mirror Mount Nozzle Pack of 2pc
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 51895 1/2" Fixed Mount - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
