1/2" Nozzles
LOC-LINE LOC-LINE 72012 HPT (CT Style) W/Adj Lever Noz = .062X.5 Thread = 1/8" Pack of 2
LOC-LINE 72012 HPT (CT Style) W/Adj Lever Noz = .062X.5 Thread = 1/8" Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$54.38
LOC-LINE LOC-LINE 72011 HPT (CT Style) W/Adj Lever Noz = .062X.25 Thread = 1/8" Pack of 2
LOC-LINE 72011 HPT (CT Style) W/Adj Lever Noz = .062X.25 Thread = 1/8" Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$49.43
LOC-LINE LOC-LINE 57867 Acid Resistant 1-1/4" Flare Nozzle for 1/2" System, Pack of 20
LOC-LINE 57867 Acid Resistant 1-1/4" Flare Nozzle - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$77.85
LOC-LINE LOC-LINE 57863 Acid Resistant 1/2" Round Nozzle for 1/2" System, Pack of 50
LOC-LINE 57863 Acid Resistant 1/2" Round Nozzle - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$74.25
LOC-LINE LOC-LINE 57862 Acid Resistant 3/8" Round Nozzle for 1/2" System, Pack of 50
LOC-LINE 57862 Acid Resistant 3/8" Round Nozzle - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$74.25
LOC-LINE LOC-LINE 56807 Acid Resistant 1-1/4" Flare Nozzle for 1/2" System, Pack of 2
LOC-LINE 56807 Acid Resistant 1-1/4" Flare Nozzle - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$11.21
LOC-LINE LOC-LINE 56803 Acid Resistant 1/2" Round Nozzle for 1/2" System, Pack of 4
LOC-LINE 56803 Acid Resistant 1/2" Round Nozzle - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$7.48
LOC-LINE LOC-LINE 56802 Acid Resistant 3/8" Round Nozzle for 1/2" System, Pack of 4
LOC-LINE 56802 Acid Resistant 3/8" Round Nozzle - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$7.48
LOC-LINE LOC-LINE 51849 1/2" Nozzle-Rama Pack for 1/2" System, 1 of each (16 Nozzles)
LOC-LINE 51849 1/2" Nozzle-Rama Pack - 1 of each (16 Nozzles) Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$36.39
LOC-LINE LOC-LINE 46450 Acid Resistant 1/4" Swivel Nozzle 60 for 1/4" System, Pack of 20
LOC-LINE 46450 Acid Resistant 1/4" Swivel Nozzle 60 - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$113.41
LOC-LINE LOC-LINE 46449 Acid Resistant 1/4" Swivel Nozzle 40 for 1/4" System, Pack of 20
LOC-LINE 46449 Acid Resistant 1/4" Swivel Nozzle 40 - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$113.41
LOC-LINE LOC-LINE 46424 Acid Resistant 1/4" Round Nozzle for 1/4" System, Pack of 50
LOC-LINE 46424 Acid Resistant 1/4" Round Nozzle - Pack of 50 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$65.08
LOC-LINE LOC-LINE 46423 Acid Resistant 1/8" Round Nozzle for 1/4" System, Pack of 50
LOC-LINE 46423 Acid Resistant 1/8" Round Nozzle - Pack of 50 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$65.08
LOC-LINE LOC-LINE 46422 Acid Resistant 1/16" Round Nozzle for 1/4" System, Pack of 50
LOC-LINE 46422 Acid Resistant 1/16" Round Nozzle - Pack of 50 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$65.08
LOC-LINE LOC-LINE 45482 Acid Resistant 1/4" Swivel Nozzle 60 for 1/4" System, Pack of 2
LOC-LINE 45482 Acid Resistant 1/4" Swivel Nozzle 60 - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$14.19
LOC-LINE LOC-LINE 45481 Acid Resistant 1/4" Swivel Nozzle 40 for 1/4" System, Pack of 2
LOC-LINE 45481 Acid Resistant 1/4" Swivel Nozzle 40 - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$14.19
LOC-LINE LOC-LINE 45407 Acid Resistant 1" Flare Nozzle for 1/4" System, Pack of 2
LOC-LINE 45407 Acid Resistant 1" Flare Nozzle - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$9.91
LOC-LINE LOC-LINE 45404 Acid Resistant 1/4" Round Nozzle for 1/4" System, Pack of 4
LOC-LINE 45404 Acid Resistant 1/4" Round Nozzle - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$6.62
LOC-LINE LOC-LINE 45402 Acid Resistant 1/16" Round Nozzle for 1/4" System, Pack of 4
LOC-LINE 45402 Acid Resistant 1/16" Round Nozzle - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.
$6.62
LOC-LINE LOC-LINE 42400 ProStream Nozzle Kit .160x1.25
LOC-LINE 42400 ProStream Nozzle Kit .160x1.25 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$33.64
LOC-LINE LOC-LINE 41427 ProStream Nozzles .160x1.25 - Pack of 2
LOC-LINE 41427 ProStream Nozzles .160x1.25 - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$28.65
LOC-LINE LOC-LINE 41426 ProStream Nozzles .117x1.25 - Pack of 2
LOC-LINE 41426 ProStream Nozzles .117x1.25 - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$28.65
LOC-LINE LOC-LINE 41425 ProStream Nozzles .086x1.25 - Pack of 2
LOC-LINE 41425 ProStream Nozzles .086x1.25 - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$28.65
LOC-LINE LOC-LINE 41424 ProStream Nozzles .062x1.25 - Pack of 2
LOC-LINE 41424 ProStream Nozzles .062x1.25 - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point: 329F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.
$28.65