The Adfast 300ml Caulking Gun is a professional-grade caulking gun that is ideal for everyday and industrial use. The lightweight and robust construction allows for easy and efficient sealing and bonding applications, helping to reduce mess and errors. The trigger-release design ensures reliable, accurate results with every use. Quality and reliability guaranteed.
Constructed with Electro-polished 304 stainless steel, meets the USDA and NSF requirements for "Food Zones"
All stainless steel motor
Motor washdown specification is IEC-IP55
Non-oscillating, 115V, 1/15 HP (20") and 115/230V, 1/4 HP (24"), 1/3 HP (30"), 1 phase, TENV, ball bearing.
Designed to withstand moist/wet environments, high pressure cleaning with concentrated caustic solutions without affecting performance or function
Available in Non-adjustable pedestal or wall mount
Submittal Sheet
Catalogue Page
Constructed with Electro-polished 304 stainless steel, meets the USDA and NSF requirements for "Food Zones"
All stainless steel motor
Motor washdown specification is IEC-IP55
Non-oscillating, 115V, 1/15 HP (20") and 115/230V, 1/4 HP (24"), 1/3 HP (30"), 1 phase, TENV, ball bearing.
Designed to withstand moist/wet environments, high pressure cleaning with concentrated caustic solutions without affecting performance or function
Available in Non-adjustable pedestal or wall mount
Submittal SheetCatalog Page
Models are UPS shippable in one carton
Pedestal models adjust 43" to 63"; 26" base diameter
Wall/ceiling mount models include safety cable
All stocked
115V, 1/4 HP, 1 phase, 3 speed, totally enclosed air over ball bearing motor
Galvanize steel propeller
15' supply cord and three prong plug included
Industrial-sized standing and wall-mounted fans are cost-effective and efficiently equipped with powerful 115V motors.
Motor: 115V, 1/4 HP, 1 Phase, 3-speed, totally enclosed air over ball bearing motor
Galvanized steel propeller.
15' supply cord with 3-prong plug.
Adjustable pedestal (43" to 63").
Base diameter: 26"
Industrial-sized standing and wall-mounted fans are cost-effective and efficiently equipped with powerful 115V motors.
Motor: 115V, 1/4 HP, 1 Phase, 3-speed, totally enclosed air over ball bearing motor
Galvanized steel propeller.
15' supply cord with 3-prong plug.
Adjustable pedestal (43" to 63").
Base diameter: 26"
Packaged in one UPS shippable carton
115V, 1/3 HP, 1 phase, 3 speed, totally enclosed air over ball bearing motor
Galvanized steel propeller
15' supply cord and three prong plug included
2 Year Warranty - Affordable Quality
Industrial-sized standing and wall-mounted fans are cost-effective and efficiently equipped with powerful 115V motors.
Motor: 115V, 1/4 HP, 1 Phase, 3-speed, totally enclosed air over ball bearing motor
Galvanized steel propeller.
15' supply cord with 3-prong plug.
Adjustable pedestal (43" to 63").
Base diameter: 26"
This Airmaster 71586 pedestal-mount circulator has a 30" blade diameter, includes an adjustable-height pedestal mount, and is suitable for providing directed air circulation.
3-speed 30" circulator fan head with adjustable-height pedestal mount
115V, 3.5 amp, single phase, 1/4 hp, permanently lubricated, totally enclosed ball bearing motor
Three speed settings for airflow rates up to 6,100 cubic feet per minute (CFM)
Three galvanized steel paddle blades attached to a steel hub and spider assembly for durability
UL Listed for quality assurance
Available in 12", 18" and 20" propeller sizes
Four position easy reach switch with 10' three conductor cord and plug
High stand and yoke mount models adjust 360°
Nickle chrome guards meet OSHA regulations
Work station yoke mount attaches to any surface with 1 bolt or lag screw
115V, 1 phase, 3 speed, open drip proof, ball bearing motor
Aluminum propellers
Catalogue Page
• Stationary, 1-phase, un-assembled• 105 deg F maximum ambient temperature• Direct drive, open drip proof motor enclosure, class B motor insulation, auto thermal protection• 14-1/2 in outside diameter• 8 ft cord length• Nickel chrome/steel wire guard finish• Ball bearing, 5/16 in shaft diameter
Available in 12", 18" and 20" propeller sizes
Four position easy reach switch with 10' three conductor cord and plug
High stand and yoke mount models adjust 360°
Nickle chrome guards meet OSHA regulations
Work station yoke mount attaches to any surface with 1 bolt or lag screw
115V, 1 phase, 3 speed, open drip proof, ball bearing motor
Aluminum propellers
Catalogue Page
Office floor fans have a wide support base to resist tipping over, even when bumped. These cooling fans are also light enough to pick up and carry where needed.
Available in 12", 18" and 20" propeller sizes
Four position easy reach switch with 10' three conductor cord and plug
High stand and yoke mount models adjust 360°
Nickle chrome guards meet OSHA regulations
Work station yoke mount attaches to any surface with 1 bolt or lag screw
115V, 1 phase, 3 speed, open drip proof, ball bearing motor
Aluminum propellers
Catalogue Page
Available in 12" & 18" propeller size
Four position easy reach switch with 10' three conductor cord and plug
Adjustable 360°
Nickle chrome guards
Meet OSHA regulations
115V, 1 phase, 3 speed, totally enclosed, ball bearing motor
Chrome yoke mount included
Aluminum propellers
Catalog Page
A one part, low odor, neutral resistant, non-corrosive silicone adhesive/sealant. It is designed to adhere ceramic tile to many substrates such as acrylic, fiberglass, ABS, PVC, wood and masonry. It also provides an excellent seal for spa jets and fittings. Ideal for bathroom tile installations.
Waterproof/weatherproof seal
Mildew resistant
Non-sag formula
Adheres ceramic tile, spa jets, skimmers
VOC Compliant in all 50 states
TDS
SDS
A one part, low odor, neutral resistant, non-corrosive silicone adhesive/sealant. It is designed to adhere ceramic tile to many substrates such as acrylic, fiberglass, ABS, PVC, wood and masonry. It also provides an excellent seal for spa jets and fittings. Ideal for bathroom tile installations.
Waterproof/weatherproof seal
Mildew resistant
Non-sag formula
Adheres ceramic tile, spa jets, skimmers
VOC Compliant in all 50 states
TDS
SDS
A one part, mildew resistant, acetoxy cure silicone sealant. Designed for sealing spa jets, skimmers and fittings. Can be used for most repair and maintenance applications.
Low viscosity and slow skin time to allow for smoother tooling and finished seal
Sealing spa jets, skimmers
Mildew resistant
Waterproof/weatherproof seal
Non-sag formula
VOC Compliant in all 50 states
TDS
SDS
A one part, mildew resistant, acetoxy cure silicone sealant. Designed for sealing spa jets, skimmers and fittings. Can be used for most repair and maintenance applications.
Low viscosity and slow skin time to allow for smoother tooling and finished seal
Sealing spa jets, skimmers
Mildew resistant
Waterproof/weatherproof seal
Non-sag formula
VOC Compliant in all 50 states
TDS
SDS
A true firestopping foam that is UL Classified and has passed the strict UL 1479 and ASTM E-814 tests. UL systems for cables, conduit and metallic pipes available. (Please consult the UL directory for a full list of approved systems.)
Foam only systems available
Up to 2 hour fire rating
Paintable (after inspection)
TDS
SDS
Sales Sheet
A true firestopping foam that is UL Classified and has passed the strict UL 1479 and ASTM E-814 tests. UL systems for cables, conduit and metallic pipes available. (Please consult the UL directory for a full list of approved systems.)
Foam only systems available
Up to 2 hour fire rating
Paintable (after inspection)
TDS
SDS
Sales Sheet
