Desmond Stephan
DESMOND Desmond 46220 Angle Dresser
Condition and dress diamond and CBN wheels on surface grinders with this angle mounted abrasive wheel dresser. Bolt to slot or hold with magnetic chuck. Accuracy provided by a sealed ball bearing assembly. Furnished with a medium wheel to be used on 100 grit or coarser grinder. (2-1/2" x 1/2" x 1-1/8" hole wheel) Code Number Type 46200 Dresser with medium wheel 46220 Medium wheel for 100 and coarser 46210 Fine wheel for 100 and finer
$16.90
DESMOND Desmond 46200 Angle Dresser
Condition and dress diamond and CBN wheels on surface grinders with this angle mounted abrasive wheel dresser. Bolt to slot or hold with magnetic chuck. Accuracy provided by a sealed ball bearing assembly. Furnished with a medium wheel to be used on 100 grit or coarser grinder. (2-1/2" x 1/2" x 1-1/8" hole wheel) Code Number Type 46200 Dresser with medium wheel 46220 Medium wheel for 100 and coarser 46210 Fine wheel for 100 and finer
$215.52
DESMOND Desmond 15220 #2 Sherman Cutters
These corrugated cutters have a shearing action and give a finer finish than the Huntington type cutters. Code Number Dresser Size Diameter Face Wgt. / lbs. 15210 2 over 16"Â 3"Â 5-1/4Â Code Number Cutters Diameter Face 15220 2 2-3/8" 19/32"Â
$10.40
DESMOND Desmond 46300 Boron Dresser Stick
Boron Carbide sticks are extremely hard and long lasting. For medium to fine grit vitrified wheel dressing. Code No. Size 46300 Boron 1/4"x1/2"x3" stick
$61.57
DESMOND Desmond 24420 BCA-4 Replacement Cutter for BeltBrasive Dressers
For use on coated abrasive belts and discs for removing the load caused by grinding steel, brass, plastic or wood. When used at frequent intervals it will prevent most of the load from forming and considerably increase the life of the belt or disc. Code No. Dresser No. 24110 BCA-1 Dresser for use on 200-300 grain 24310 BCA-1-NS Dresser non-sparking 200-300 24210 BCA-2 Dresser for use on 60-200 grain 24510 BCA-2-NS Dresser non-sparking 60-200 grain 24410 BCA-4 Dresser for use on 0-60 grain 24120 BCA-1 Cutter units each 24320 BCA-1-NS Cutter unit non-sparking 24220 BCA-2 Cutter units each 24520 BCA-2-NS Cutter unit non-sparking 24420 BCA-4 Cutter sets each
$12.17
DESMOND Desmond 24410 BCA-4 BeltBrasive Dresser
For use on coated abrasive belts and discs for removing the load caused by grinding steel, brass, plastic or wood. When used at frequent intervals it will prevent most of the load from forming and considerably increase the life of the belt or disc. Code No. Dresser No. 24110 BCA-1 Dresser for use on 200-300 grain 24310 BCA-1-NS Dresser non-sparking 200-300 24210 BCA-2 Dresser for use on 60-200 grain 24510 BCA-2-NS Dresser non-sparking 60-200 grain 24410 BCA-4 Dresser for use on 0-60 grain 24120 BCA-1 Cutter units each 24320 BCA-1-NS Cutter unit non-sparking 24220 BCA-2 Cutter units each 24520 BCA-2-NS Cutter unit non-sparking 24420 BCA-4 Cutter sets each
$40.03
DESMOND Desmond 30085 Replacement Adjusting Screw for Disc Grinder Cutters
Replacement square hole type cutter sets for disc grinders. Furnished in sets of six. Code No. Cutter Type Size 30020 Cutters, 18 tooth, coarse 2 3/8" x 9/16"sq. 30040 Cutters, 30 tooth, fine 2 3/8" x 9/16"sq. 30081 Shaft 9/16"sq. x 1/2"-13 thread 30082 Berg. & Block 1/2"-13 Thread 30084 Adj. Screw Nut 11/16"-16 Thread 30085 Adj. Screw 11/16"-16 Thread
$15.86
DESMOND Desmond 30084 Replacement Adjusting Screw Nut for Disc Grinder Cutters
Replacement square hole type cutter sets for disc grinders. Furnished in sets of six. Code No. Cutter Type Size 30020 Cutters, 18 tooth, coarse 2 3/8" x 9/16"sq. 30040 Cutters, 30 tooth, fine 2 3/8" x 9/16"sq. 30081 Shaft 9/16"sq. x 1/2"-13 thread 30082 Berg. & Block 1/2"-13 Thread 30084 Adj. Screw Nut 11/16"-16 Thread 30085 Adj. Screw 11/16"-16 Thread
$7.07
DESMOND Desmond 30081 Replacement Shaft for Disc Grinder Cutters
Replacement square hole type cutter sets for disc grinders. Furnished in sets of six. Code No. Cutter Type Size 30020 Cutters, 18 tooth, coarse 2 3/8" x 9/16"sq. 30040 Cutters, 30 tooth, fine 2 3/8" x 9/16"sq. 30081 Shaft 9/16"sq. x 1/2"-13 thread 30082 Berg. & Block 1/2"-13 Thread 30084 Adj. Screw Nut 11/16"-16 Thread 30085 Adj. Screw 11/16"-16 Thread
$17.77
DESMOND Desmond 30020 Replacement Cutters for Disc Grinder Cutters
Replacement square hole type cutter sets for disc grinders. Furnished in sets of six. Code No. Cutter Type Size 30020 Cutters, 18 tooth, coarse 2 3/8" x 9/16"sq. 30040 Cutters, 30 tooth, fine 2 3/8" x 9/16"sq. 30081 Shaft 9/16"sq. x 1/2"-13 thread 30082 Berg. & Block 1/2"-13 Thread 30084 Adj. Screw Nut 11/16"-16 Thread 30085 Adj. Screw 11/16"-16 Thread
$12.71
DESMOND Desmond 17050 BB-14-R Loose Cutter Set for Precision Dressers
For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2 Â
$26.63
DESMOND Desmond 17030 BB-14 Loose Cutter Set for Precision Dressers
For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2 Â
$29.05
DESMOND Desmond 17730 BB-10-17-B Replacement Cutter for Precision Dressers
For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2 Â
$115.96
DESMOND Desmond 17520 BB-10-5 Cutter Unit DISCONTINUED
For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2 Â
$115.96
DESMOND Desmond 17020 BB-10 Replacement Cutter for Precision Dressers
For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2 Â
$106.29
DESMOND Desmond 17410 BB-4 Precision Dresser
For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2 Â
$296.31
DESMOND Desmond 17310 BB-3 Precision Dresser
For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2 Â
$296.31
DESMOND Desmond 17610 BB-2-R Precision Dresser
For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2 Â
$296.31
DESMOND Desmond 22420 #4 Abrasive Stick
The dressers hold abrasive sticks by means of the knurled chuck. New sticks may easily be inserted. Code Number Dresser Number Type 22110 No. 1 Magazine Dresser with 1/2" dia stick 22210 No. 2 Magazine Dresser with 3/4" dia stick 22410 No. 4 Magazine Dresser with 1" sq. stick 22120 No. 1 Abrasive Sticks, 6" long 22220 No. 2 Abrasive Sticks, 6" long 22420 No. 4 Abrasive Sticks, 6" long
$7.77
DESMOND Desmond 22220 #2 Abrasive Stick
The dressers hold abrasive sticks by means of the knurled chuck. New sticks may easily be inserted. Code Number Dresser Number Type 22110 No. 1 Magazine Dresser with 1/2" dia stick 22210 No. 2 Magazine Dresser with 3/4" dia stick 22410 No. 4 Magazine Dresser with 1" sq. stick 22120 No. 1 Abrasive Sticks, 6" long 22220 No. 2 Abrasive Sticks, 6" long 22420 No. 4 Abrasive Sticks, 6" long
$12.31
DESMOND Desmond 22410 #4 Magazine Dresser
The dressers hold abrasive sticks by means of the knurled chuck. New sticks may easily be inserted. Code Number Dresser Number Type 22110 No. 1 Magazine Dresser with 1/2" dia stick 22210 No. 2 Magazine Dresser with 3/4" dia stick 22410 No. 4 Magazine Dresser with 1" sq. stick 22120 No. 1 Abrasive Sticks, 6" long 22220 No. 2 Abrasive Sticks, 6" long 22420 No. 4 Abrasive Sticks, 6" long
$82.48
DESMOND Desmond 22210 #2 Magazine Dresser
The dressers hold abrasive sticks by means of the knurled chuck. New sticks may easily be inserted. Code Number Dresser Number Type 22110 No. 1 Magazine Dresser with 1/2" dia stick 22210 No. 2 Magazine Dresser with 3/4" dia stick 22410 No. 4 Magazine Dresser with 1" sq. stick 22120 No. 1 Abrasive Sticks, 6" long 22220 No. 2 Abrasive Sticks, 6" long 22420 No. 4 Abrasive Sticks, 6" long
$40.54
DESMOND Desmond 22110 #1 Magazine Dresser
The dressers hold abrasive sticks by means of the knurled chuck. New sticks may easily be inserted. Code Number Dresser Number Type 22110 No. 1 Magazine Dresser with 1/2" dia stick 22210 No. 2 Magazine Dresser with 3/4" dia stick 22410 No. 4 Magazine Dresser with 1" sq. stick 22120 No. 1 Abrasive Sticks, 6" long 22220 No. 2 Abrasive Sticks, 6" long 22420 No. 4 Abrasive Sticks, 6" long
$33.50
DESMOND Desmond Crackerjack Junior Extra Wheel
The abrasive wheel produces a dressing and truing action when held at an angle of 15 degrees from the axis of the wheel being dressed. Full 4" diameter by 1 1/2" face wheel mounted on double row of dust protected ball bearings. Handles designed to protect the users hands. Code No. Dresser Type Wgt. / lbs. 25110 Double Handle Type, Hooded 5-3/4 25120 Extra Wheel 4" x 1-1/2" x 1-1/2" 1-3/4 Crackerjack Jr. Dresser in single handle type only with 3" by 1" face wheel 25410 Single handle dresser 3-1/2 25420 Extra Wheel 3" x 1" x 3/4" 3/4
$32.52