EZ-LOK
E-Z LOK E-Z LOK™ - 313-M12 Pack of 5 - E-Z LOK Threaded Insert - Thin Wall - 303 Stainless Steel - M12-1.75 x 5/8-18 x 0.625" OAL
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 313-M12 For Use in: Metal Specific Material Use: N/A Sub-Category: Thin Wall Style: Solid Wall Material: Steel - Stainless System of Measurement: Metric Internal Thread: M12-1.75 External Thread: N/A Installed Length: 0.63 Drill Size: 37/64 Tap Size: 5/8-18 Minimum Full Thread Depth: 0.68 Installation Tool P/N: 500-6
$34.98
E-Z LOK E-Z LOK™ - 313-820 Pack of 5 - E-Z LOK Threaded Insert for Metal - Thin Wall - 303 Stainless - 1/2-20 x 5/8-18 x 0.625" OAL
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 313-820 For Use in: Metal Specific Material Use: N/A Sub-Category: Thin Wall Style: Solid Wall Material: Steel - Stainless System of Measurement: Inch Internal Thread: 1/2-20 External Thread: 5/8-18 Installed Length: 0.63 Drill Size: 37/64 Tap Size: 5/8-18 Minimum Full Thread Depth: 0.68 Installation Tool P/N: 500-6
$34.98
E-Z LOK E-Z LOK™ - 313-8 Pack of 5 - E-Z LOK Threaded Insert for Metal - Thin Wall - 303 Stainless - 1/2-13 x 5/8-18 x 0.625" OAL
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 313-8 For Use in: Metal Specific Material Use: N/A Sub-Category: Thin Wall Style: Solid Wall Material: Steel - Stainless System of Measurement: Inch Internal Thread: 1/2-13 External Thread: 5/8-18 Installed Length: 0.63 Drill Size: 37/64 Tap Size: 5/8-18 Minimum Full Thread Depth: 0.68 Installation Tool P/N: 500-6
$34.98
E-Z LOK E-Z LOK™ - 31410 Pack of 5 - E-Z Coil™ Threaded Insert for Metal - 5/8-18 x 1D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 31410 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 5/8-18 External Thread: N/A Installed Length: 0.63 Drill Size: 41/64 Tap Size: 5/8-18 STI Minimum Full Thread Depth: 0.85 Installation Tool P/N: M1018
$12.01
E-Z LOK E-Z LOK™ - 30920 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 5/16-24 x 2D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 30920 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 5/16-24 External Thread: N/A Installed Length: 0.63 Drill Size: 21/64 Tap Size: 5/16-24 STI Minimum Full Thread Depth: 0.48 Installation Tool P/N: M1011
$7.08
E-Z LOK E-Z LOK™ - 21410 Pack of 5 - E-Z Coil™ Threaded Insert for Metal - 5/8-11 x 1D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 21410 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 5/8-11 External Thread: N/A Installed Length: 0.63 Drill Size: 21/32 Tap Size: 5/8-11 STI Minimum Full Thread Depth: 0.99 Installation Tool P/N: M1018
$12.01
E-Z LOK E-Z LOK™ - 20920 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 5/16-18 x 2D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20920 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 5/16-18 External Thread: N/A Installed Length: 0.63 Drill Size: 21/64 Tap Size: 5/16-18 STI Minimum Full Thread Depth: 0.53 Installation Tool P/N: M1010
$7.08