EZ-LOK

5 products

  • Low stock! E-Z LOK™ - 329-1412 Pack of 5 - E-Z LOK Threaded Insert for Metal - Automotive - Carbon Steel - M14-1.25 (3/4" Reach) x 3/4-16

    E-Z LOK E-Z LOK™ - 329-1412 Pack of 5 - E-Z LOK Threaded Insert for Metal - Automotive - Carbon Steel - M14-1.25 (3/4" Reach) x 3/4-16

    2 in stock

    E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 329-1412 For Use in: Metal Specific Material Use: N/A Sub-Category: Automotive Style: Solid Wall Material: Steel - Carbon System of Measurement: Metric Internal Thread: M14-1.25 External Thread: N/A Installed Length: 18 Drill Size: 11/16 Tap Size: 3/4-16 Minimum Full Thread Depth: N/A Installation Tool P/N: Install Tool Not Available

    2 in stock

    $18.75

  • E-Z LOK™ - 329-1212 Pack of 5 - E-Z LOK Threaded Insert for Metal - Automotive - Carbon Steel - M12-1.25 (3/4" Reach) x 5/8-18

    E-Z LOK E-Z LOK™ - 329-1212 Pack of 5 - E-Z LOK Threaded Insert for Metal - Automotive - Carbon Steel - M12-1.25 (3/4" Reach) x 5/8-18

    8 in stock

    E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 329-1212 For Use in: Metal Specific Material Use: N/A Sub-Category: Automotive Style: Solid Wall Material: Steel - Carbon System of Measurement: Metric Internal Thread: M12-1.25 External Thread: N/A Installed Length: 18 Drill Size: 37/64 Tap Size: 5/8-18 Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    8 in stock

    $12.24

  • E-Z LOK™ - 51015 Pack of 5 - E-Z Coil™ Threaded Insert for Metal - M12-1.5 x 1.5D

    E-Z LOK E-Z LOK™ - 51015 Pack of 5 - E-Z Coil™ Threaded Insert for Metal - M12-1.5 x 1.5D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 51015 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M12-1.5 External Thread: N/A Installed Length: 18 Drill Size: 12.4 Tap Size: M12-1.5 STI Minimum Full Thread Depth: 18 Installation Tool P/N: M1015

    Online special order

    $5.77

  • E-Z LOK™ - 41310 Pack of 5 - E-Z Coil™ Threaded Insert for Metal - M18-2.5 x 1D

    E-Z LOK E-Z LOK™ - 41310 Pack of 5 - E-Z Coil™ Threaded Insert for Metal - M18-2.5 x 1D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 41310 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M18-2.5 External Thread: N/A Installed Length: 18 Drill Size: 18.5 Tap Size: M18-2.5 STI Minimum Full Thread Depth: 28 Installation Tool P/N: M1020

    Online special order

    $17.78

  • E-Z LOK™ - 41015 Pack of 5 - E-Z Coil™ Threaded Insert for Metal - M12-1.75 x 1.5D

    E-Z LOK E-Z LOK™ - 41015 Pack of 5 - E-Z Coil™ Threaded Insert for Metal - M12-1.75 x 1.5D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 41015 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M12-1.75 External Thread: N/A Installed Length: 18 Drill Size: 12.4 Tap Size: M12-1.75 STI Minimum Full Thread Depth: 19 Installation Tool P/N: M1015

    Online special order

    $5.49

Login

Forgot your password?

Don't have an account yet?
Create account