EZ-LOK

6 products

  • E-Z LOK™ - TH-M30-SV Pack of 100 - E-Z Sonic™ Threaded Insert for Plastic - Tapered - Single Vane - M3-0.5

    E-Z LOK E-Z LOK™ - TH-M30-SV Pack of 100 - E-Z Sonic™ Threaded Insert for Plastic - Tapered - Single Vane - M3-0.5

    Online special order

    E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application. Features Tapered and straight designs Install ultrasonically or with heat driver Superior torque and pull-out resistance Inch or metric threads Tapered design in single and double vane Straight design in flush or flanged configuration Applications: Post-molding installation in thermoplastic materials Installation: Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples. E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application. Features Tapered and straight designs Install ultrasonically or with heat driver Superior torque and pull-out resistance Inch or metric threads Tapered design in single and double vane Straight design in flush or flanged configuration Applications: Post-molding installation in thermoplastic materials Installation: Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples. Specifications E-Z Lok P/N: TH-M30-SV For Use in: Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Ultrasonic Material: Brass System of Measurement: Metric Internal Thread: M3-0.5 External Thread: N/A Installed Length: 4 Drill Size: See Dimensional Dwg Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A E-Z Lok P/N: TH-M30-SV For Use in: Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Ultrasonic Material: Brass System of Measurement: Metric Internal Thread: M3-0.5 External Thread: N/A Installed Length: 4 Drill Size: See Dimensional Dwg Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $11.17

  • E-Z LOK™ - 40410 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M4-0.7 x 1D

    E-Z LOK E-Z LOK™ - 40410 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M4-0.7 x 1D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 40410 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 4 Drill Size: 4.1 Tap Size: M4-0.7 STI Minimum Full Thread Depth: 6.8 Installation Tool P/N: M1006

    Online special order

    $4.84

  • E-Z LOK™ - 40310 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M3.5-0.6 x 1D

    E-Z LOK E-Z LOK™ - 40310 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M3.5-0.6 x 1D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 40310 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M3.5-0.6 External Thread: N/A Installed Length: 4 Drill Size: 3.6 Tap Size: M3.5-0.6 STI Minimum Full Thread Depth: 5.9 Installation Tool P/N: M1005

    Online special order

    $4.84

  • E-Z LOK™ - 40215 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M3-0.5 x 1.5D

    E-Z LOK E-Z LOK™ - 40215 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M3-0.5 x 1.5D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 40215 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M3-0.5 External Thread: N/A Installed Length: 4 Drill Size: 3.1 Tap Size: M3-0.5 STI Minimum Full Thread Depth: 5 Installation Tool P/N: M1004

    Online special order

    $4.47

  • E-Z LOK™ - 40115 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M2.5-0.45 x 1.5D

    E-Z LOK E-Z LOK™ - 40115 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M2.5-0.45 x 1.5D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 40115 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M2.5-.45 External Thread: N/A Installed Length: 4 Drill Size: 2.6 Tap Size: M2.5-.45 STI Minimum Full Thread Depth: 4.3 Installation Tool P/N: M1002

    Online special order

    $4.47

  • E-Z LOK™ - 40020 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M2x0.4 x 2D

    E-Z LOK E-Z LOK™ - 40020 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M2x0.4 x 2D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 40020 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M2-0.4 External Thread: N/A Installed Length: 4 Drill Size: 2.1 Tap Size: M2-0.4 STI Minimum Full Thread Depth: 3.6 Installation Tool P/N: M1002

    Online special order

    $5.77

Login

Forgot your password?

Don't have an account yet?
Create account