EZ-LOK

18 products

  • E-Z LOK™ - TH-M40-SV Pack of 100 - E-Z Sonic™ Threaded Insert for Plastic - Tapered - Single Vane - M4-0.7

    E-Z LOK E-Z LOK™ - TH-M40-SV Pack of 100 - E-Z Sonic™ Threaded Insert for Plastic - Tapered - Single Vane - M4-0.7

    Online special order

    E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application. Features Tapered and straight designs Install ultrasonically or with heat driver Superior torque and pull-out resistance Inch or metric threads Tapered design in single and double vane Straight design in flush or flanged configuration Applications: Post-molding installation in thermoplastic materials Installation: Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples. Specifications E-Z Lok P/N: TH-M40-SV For Use in: Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Ultrasonic Material: Brass System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 5 Drill Size: See Dimensional Dwg Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $13.57

  • E-Z LOK™ - DV-M40-TH Pack of 100 - E-Z Sonic™ Threaded Insert for Plastic - Tapered - Double vane - M4-0.7

    E-Z LOK E-Z LOK™ - DV-M40-TH Pack of 100 - E-Z Sonic™ Threaded Insert for Plastic - Tapered - Double vane - M4-0.7

    Online special order

    E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application. Features Tapered and straight designs Install ultrasonically or with heat driver Superior torque and pull-out resistance Inch or metric threads Tapered design in single and double vane Straight design in flush or flanged configuration Applications: Post-molding installation in thermoplastic materials Installation: Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples. Specifications E-Z Lok P/N: DV-M40-TH For Use in: Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Ultrasonic Material: Brass System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 8 Drill Size: See Dimensional Dwg Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $14.90

  • E-Z LOK™ - 800407-10 Pack of 50 - E-Z Hex™ Threaded Insert for Soft Wood - Flush - M4-0.7 x 10mm

    E-Z LOK E-Z LOK™ - 800407-10 Pack of 50 - E-Z Hex™ Threaded Insert for Soft Wood - Flush - M4-0.7 x 10mm

    Online special order

    Generically referred to as Type D (flanged) or Type E (flush) insert nuts, E-Z Hex™ (Hex Drive) inserts provide sturdy machine threads in soft woods. These hex drives are an ideal solution for any application where assembly or disassembly could lead to thread erosion or stripping.E-Z Hex™ inserts feature broad external threads that provide exceptional holding power in materials like pine, composition board, MDF, and plywood. We offer E-Z Hex™ with internal thread sizes ranging from #8 to 3/8-16, plus M6 and M8. Die-cast from a durable zinc alloy, E-Z Hex™ inserts install quickly with an Allen wrench or optional drive tool.E-Z LOK hex drive threaded inserts are available with internal thread sizes from #8 to 3/8, as well as M6 and M8. Most sizes are available in a variety of lengths to meet the needs of your unique application.Features:Inexpensive solution for reinforcing threads in soft woodsInstall with Allen wrench or optional drive toolInch or metric threads availableFlush and flanged designs availableMultiple lengths availableApplications:Ready to Assemble FurnitureDrawer PullsDisplay CasesCratingMaterials such as pine, plywood, composition board, and MDF...anywhere a threaded fastener is installed in soft wood Specifications: E-Z Lok P/N: 800407-10 For Use in: Soft Wood Specific Material Use: N/A Sub-Category: N/A Style: Hex Drive Material: Zinc System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: N/A Drill Size: N/A Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: 8500

    Online special order

    $6.12

  • Low stock! E-Z LOK™ - 453-4 Pack of 5 - E-Z LOK Threaded Insert for Metal - Standard Wall - 303 Stainless - M4-0.7 x M8-1.25

    E-Z LOK E-Z LOK™ - 453-4 Pack of 5 - E-Z LOK Threaded Insert for Metal - Standard Wall - 303 Stainless - M4-0.7 x M8-1.25

    5 in stock

    E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 453-4 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Wall Style: Solid Wall Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: M8-1.25 Installed Length: 7 Drill Size: 6.9 Tap Size: M8-1.25 Minimum Full Thread Depth: 9 Installation Tool P/N: 500-1

    5 in stock

    $15.03

  • Low stock! E-Z LOK™ - 450-4 Pack of 10 - E-Z LOK Threaded Insert for Metal - Standard Wall - Carbon Steel - M4-0.7 x M8-1.25

    E-Z LOK E-Z LOK™ - 450-4 Pack of 10 - E-Z LOK Threaded Insert for Metal - Standard Wall - Carbon Steel - M4-0.7 x M8-1.25

    6 in stock

    E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 450-4 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Wall Style: Solid Wall Material: Steel - Carbon System of Measurement: Metric Internal Thread: M4-0.7 External Thread: M8-1.25 Installed Length: 7 Drill Size: 6.9 Tap Size: M8-1.25 Minimum Full Thread Depth: 9 Installation Tool P/N: 500-1

    6 in stock

    $17.02

  • E-Z LOK™ - 416-4 Pack of 1 - E-Z LOK Threaded Insert for Metal - Standard Wall - 316 Stainless - M4-0.7 x M8-1.25

    E-Z LOK E-Z LOK™ - 416-4 Pack of 1 - E-Z LOK Threaded Insert for Metal - Standard Wall - 316 Stainless - M4-0.7 x M8-1.25

    Online special order

    E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 416-4 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Wall Style: Solid Wall Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: M8-1.25 Installed Length: 7 Drill Size: 6.9 Tap Size: M8-1.25 Minimum Full Thread Depth: 9 Installation Tool P/N: 500-1

    Online special order

    $10.08

  • E-Z LOK™ - 400-M4-CR Pack of 10 - E-Z Knife™ Threaded Insert for Hard Wood - Stainless Steel - M4-0.7

    E-Z LOK E-Z LOK™ - 400-M4-CR Pack of 10 - E-Z Knife™ Threaded Insert for Hard Wood - Stainless Steel - M4-0.7

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down. Specifications: E-Z Lok P/N: 400-M4-CR For Use in: Hard Wood Specific Material Use: N/A Sub-Category: N/A Style: Knife Thread Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 0.375 Drill Size: 17/64 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: 500-1

    Online special order

    $19.18

  • E-Z LOK™ - 400-M4 Pack of 10 - E-Z Knife™ Threaded Insert for Hard Wood - Brass - M4-0.7

    E-Z LOK E-Z LOK™ - 400-M4 Pack of 10 - E-Z Knife™ Threaded Insert for Hard Wood - Brass - M4-0.7

    30 in stock

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down. Specifications: E-Z Lok P/N: 400-M4 For Use in: Hard Wood Specific Material Use: N/A Sub-Category: N/A Style: Knife Thread Material: Brass System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 0.375 Drill Size: 17/64 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: 500-1

    30 in stock

    $6.73

  • E-Z LOK™ - 400-M3-CR Pack of 10 - E-Z Knife™ Threaded Insert for Hard Wood - Stainless Steel - M3-0.5

    E-Z LOK E-Z LOK™ - 400-M3-CR Pack of 10 - E-Z Knife™ Threaded Insert for Hard Wood - Stainless Steel - M3-0.5

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down. Specifications: E-Z Lok P/N: 400-M3-CR For Use in: Hard Wood Specific Material Use: N/A Sub-Category: N/A Style: Knife Thread Material: Steel - Stainless System of Measurement: Metric Internal Thread: M3-0.5 External Thread: N/A Installed Length: 0.375 Drill Size: 17/64 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: 500-006

    Online special order

    $19.18

  • Low stock! E-Z LOK™ - 319-M4 Pack of 5 - E-Z LOK Threaded Insert for Metal - Thin Wall - Carbon Steel - M4-0.7 x 5/16-18

    E-Z LOK E-Z LOK™ - 319-M4 Pack of 5 - E-Z LOK Threaded Insert for Metal - Thin Wall - Carbon Steel - M4-0.7 x 5/16-18

    4 in stock

    E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 319-M4 For Use in: Metal Specific Material Use: N/A Sub-Category: Thin Wall Style: Solid Wall Material: Steel - Carbon System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 8 Drill Size: I Tap Size: 5/16-18 Minimum Full Thread Depth: N/A Installation Tool P/N: 500-1

    4 in stock

    $8.91

  • E-Z LOK™ - 313-M4 Pack of 5 - E-Z LOK Threaded Insert - Thin Wall - 303 Stainless Steel - M4-0.7 x 5/16-24 x 0.313" OAL

    E-Z LOK E-Z LOK™ - 313-M4 Pack of 5 - E-Z LOK Threaded Insert - Thin Wall - 303 Stainless Steel - M4-0.7 x 5/16-24 x 0.313" OAL

    Online special order

    E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 313-M4 For Use in: Metal Specific Material Use: N/A Sub-Category: Thin Wall Style: Solid Wall Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 0.31 Drill Size: I Tap Size: 5/16-24 Minimum Full Thread Depth: 0.375 Installation Tool P/N: 500-1

    Online special order

    $17.56

  • E-Z LOK™ - 260-M4-CR Pack of 5 - E-Z Press™ Threaded Insert for Plastic - Flanged - 303 Stainless - M4-0.7

    E-Z LOK E-Z LOK™ - 260-M4-CR Pack of 5 - E-Z Press™ Threaded Insert for Plastic - Flanged - 303 Stainless - M4-0.7

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M4-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 0.313 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $7.08

  • E-Z LOK™ - 260-M4-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flanged - Brass - M4-0.7

    E-Z LOK E-Z LOK™ - 260-M4-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flanged - Brass - M4-0.7

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M4-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 8 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $14.63

  • E-Z LOK™ - 240-M4-CR Pack of 5 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - M4-0.7

    E-Z LOK E-Z LOK™ - 240-M4-CR Pack of 5 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - M4-0.7

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M4-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 0.313 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $6.80

  • E-Z LOK™ - 240-M4-BR Pack of 25 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - M4-0.7

    E-Z LOK E-Z LOK™ - 240-M4-BR Pack of 25 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - M4-0.7

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M4-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 8 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $5.85

  • E-Z LOK™ - 40420 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M4-0.7 x 2D

    E-Z LOK E-Z LOK™ - 40420 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M4-0.7 x 2D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc.Specifications: E-Z Lok P/N: 40420 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 8 Drill Size: 4.1 Tap Size: M4-0.7 STI Minimum Full Thread Depth: 6.8 Installation Tool P/N: M1006

    Online special order

    $5.03

  • E-Z LOK™ - 40415 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M4-0.7 x 1.5D

    E-Z LOK E-Z LOK™ - 40415 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M4-0.7 x 1.5D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 40415 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 6 Drill Size: 4.1 Tap Size: M4-0.7 STI Minimum Full Thread Depth: 6.8 Installation Tool P/N: M1006

    Online special order

    $4.47

  • E-Z LOK™ - 40410 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M4-0.7 x 1D

    E-Z LOK E-Z LOK™ - 40410 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - M4-0.7 x 1D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 40410 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 4 Drill Size: 4.1 Tap Size: M4-0.7 STI Minimum Full Thread Depth: 6.8 Installation Tool P/N: M1006

    Online special order

    $4.84

Login

Forgot your password?

Don't have an account yet?
Create account