E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-4
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-20
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-4
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-3-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
10-24
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-3
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-332-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
10-32
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
0.5
Installation Tool P/N:
DT-332
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-332
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Inch
Internal Thread:
10-32
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-332
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-3
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Inch
Internal Thread:
10-24
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-3
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-008
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Inch
Internal Thread:
8-32
External Thread:
N/A
Installed Length:
0.38
Drill Size:
17/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
500-1
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-006-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
6-32
External Thread:
N/A
Installed Length:
0.375
Drill Size:
17/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
500-006
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-004-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
4-40
External Thread:
N/A
Installed Length:
0.375
Drill Size:
17/64
Tap Size:
N/A
Minimum Full Thread Depth:
0.375
Installation Tool P/N:
500-004
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-004
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Inch
Internal Thread:
4-40
External Thread:
N/A
Installed Length:
0.38
Drill Size:
17/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
500-004
E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion.Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples.Features:Easy press-in installationDesign minimizes splintering and splittingAvailable in 3 lengths for varying material thicknessesApplications:Soft woods: such as pine, composition board, and MDFMost Plastics
Specifications:
E-Z Lok P/N:
370-5-BR
For Use in:
Soft Wood, Thermoset Plastic, Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Finsert
Material:
Brass
System of Measurement:
Inch
Internal Thread:
5/16-18
External Thread:
N/A
Installed Length:
0.56
Drill Size:
15/32
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion.Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples.Features:Easy press-in installationDesign minimizes splintering and splittingAvailable in 3 lengths for varying material thicknessesApplications:Soft woods: such as pine, composition board, and MDFMost Plastics
Specifications:
E-Z Lok P/N:
370-4-BR
For Use in:
Soft Wood, Thermoset Plastic, Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Finsert
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-20
External Thread:
N/A
Installed Length:
0.56
Drill Size:
13/32
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion.Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples.Features:Easy press-in installationDesign minimizes splintering and splittingAvailable in 3 lengths for varying material thicknessesApplications:Soft woods: such as pine, composition board, and MDFMost Plastics
Specifications:
E-Z Lok P/N:
370-332-BR
For Use in:
Soft Wood, Thermoset Plastic, Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Finsert
Material:
Brass
System of Measurement:
Inch
Internal Thread:
10-32
External Thread:
N/A
Installed Length:
0.56
Drill Size:
11/32
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
335-8
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Extra Heavy Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
1/2-13
External Thread:
7/8-9
Installed Length:
0.69
Drill Size:
49/64
Tap Size:
7/8-9
Minimum Full Thread Depth:
0.813
Installation Tool P/N:
Install Tool Not Available
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
335-6
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Extra Heavy Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
3/8-16
External Thread:
5/8-11
Installed Length:
0.66
Drill Size:
17/32
Tap Size:
5/8-11
Minimum Full Thread Depth:
0.719
Installation Tool P/N:
500-5
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
335-5
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Extra Heavy Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
5/16-18
External Thread:
9/16-12
Installed Length:
0.52
Drill Size:
31/64
Tap Size:
9/16-12
Minimum Full Thread Depth:
0.594
Installation Tool P/N:
500-4
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
335-4
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Extra Heavy Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
1/4-20
External Thread:
1/2-13
Installed Length:
0.48
Drill Size:
27/64
Tap Size:
1/2-13
Minimum Full Thread Depth:
0.563
Installation Tool P/N:
500-3
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
3353-6
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Extra Heavy Wall
Style:
Solid Wall
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
3/8-16
External Thread:
5/8-11
Installed Length:
0.66
Drill Size:
17/32
Tap Size:
5/8-11
Minimum Full Thread Depth:
0.719
Installation Tool P/N:
500-5
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
3353-5
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Extra Heavy Wall
Style:
Solid Wall
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
5/16-18
External Thread:
9/16-12
Installed Length:
0.52
Drill Size:
31/64
Tap Size:
9/16-12
Minimum Full Thread Depth:
0.594
Installation Tool P/N:
500-4
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
3353-4
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Extra Heavy Wall
Style:
Solid Wall
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
1/4-20
External Thread:
1/2-13
Installed Length:
0.48
Drill Size:
27/64
Tap Size:
1/2-13
Minimum Full Thread Depth:
0.563
Installation Tool P/N:
500-3
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
335-10
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Extra Heavy Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
5/8-11
External Thread:
1-8
Installed Length:
0.78
Drill Size:
7/8
Tap Size:
1-8
Minimum Full Thread Depth:
0.875
Installation Tool P/N:
Install Tool Not Available
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
329-918
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Standard Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
9/16-18
External Thread:
3/4-10
Installed Length:
0.66
Drill Size:
21/32
Tap Size:
3/4-10
Minimum Full Thread Depth:
0.75
Installation Tool P/N:
500-7
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
329-9
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Standard Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
9/16-12
External Thread:
3/4-10
Installed Length:
0.66
Drill Size:
21/32
Tap Size:
3/4-10
Minimum Full Thread Depth:
0.75
Installation Tool P/N:
500-7
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
329-8IC
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Screw Locking
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
1/2-13
External Thread:
3/4-10
Installed Length:
0.66
Drill Size:
21/32
Tap Size:
3/4-10
Minimum Full Thread Depth:
0.75
Installation Tool P/N:
500-7
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
329-820
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Standard Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
1/2-20
External Thread:
3/4-10
Installed Length:
0.66
Drill Size:
21/32
Tap Size:
3/4-10
Minimum Full Thread Depth:
0.75
Installation Tool P/N:
500-7
