Angled platform for HSK 63A or KM63 tooling
Holds (24) taper tools
Angled for visibility and easier selection of stored tools
Nylon inserts help protect tooling
Mountable on bench top
Heavy gauge steel
Tough, epoxy finish for long lasting protection
Angled platform for 40 taper CNC toolholders
Holds (24) taper tools
Angled for visibility and easier selection of stored tools
Nylon inserts help protect tooling
Mountable on bench top
Heavy gauge steel
Tough, epoxy finish for long lasting protection
Angled platform for 30 taper CNC toolholders
Holds (24) taper tools
Angled for visibility and easier selection of stored tools
Nylon inserts help protect tooling
Mountable on bench top
Heavy gauge steel
Tough, epoxy finish for long lasting protection
Super Scoot for HSK100A
Holds 2x the storage capacity
26 per shelf for up to 52 holders
Designed for maximum toolholder capacity per square foot of cart space
Molded inserts grip tools more securely
Outrigger base improves stability
Constructed of 12 gauge steel for heavy duty use
Heavy duty casters rated to 1600 lbs roll smoothly fully loaded and lock in place when stopped *Heavier duty than others in its class
Finished in beautiful, strong gold vein powder coating, baked on for lasting durability
Phosphate pretreatment undercoating for additional toughness
Super Scoot for 40 taper
Holds 2x the storage capacity
45 per shelf for up to 90 holders
Designed for maximum toolholder capacity per square foot of cart space
Molded inserts grip tools more securely
Outrigger base improves stability
Constructed of 12 gauge steel for heavy duty use
Heavy duty casters rated to 1600 lbs roll smoothly fully loaded and lock in place when stopped
Heavier duty than others in its class
Finished in beautiful, strong gold vein powder coating, baked on for lasting durability
Phosphate pretreatment undercoating for additional toughness
optional third shelf available
Huot U-Size-It TriScoot CNC Tool Cart
Although we build carts for almost twenty different toolholder sizes ranging from the common BT, CAT and HSK sizes to the most obscure, we don’t cover them all. With that in mind and knowing someone out there still needs our help, we’ve devised a cart just for them.
This customizable product consists of a 3 shelf TriScoot with a 3/8″ thick polycarbonate sheet secured to each metal shelf. Each shelf can have up to 18 custom openings up to 3.250 in diameter.
EDP 13914 available with 24 openings per sheet with a maximum diameter of 2.188″
All you need to do is provide us with the dimension at the top of the longest plane (shown as D1 on the diagram shown here) on your toolholder
SpeedyScoot Tool Cart for 40 taper tools
Holds 24 tools
Only 15″ wide allows easy movement through narrow spaces between machines and around tight corners
Durable nylon inserts to help prevent tooling damage
Solid side panel construction adds strength and repels chips to keep tools cleaner than open end carts
Heavy duty 4″ x 1-1/2″ casters load rated at 1000 lbs.
All steel infrared-baked epoxy finish in textured black
Options to suit your production needs for middle shelves and drawers.
TG100 Collet Rack
Holds up to 27 collets, hole size 1-5/16″
Protects, stores and organizes your valuable collets
Mountable on bench top
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
NC tool holder rack for 50 taper
*Holds 5 tools
Built-in end handles for comfortable carrying
Bench mount, hand carry, or mount on top
Made of heavy gauge steel
Nylon inserts help protect tooling *Painted texture black powder coating
NC tool holder rack for 40 taper
*Holds 6 tools
Built-in end handles for comfortable carrying
Bench mount, hand carry, or mount on top
Made of heavy gauge steel
Nylon inserts help protect tooling *Painted texture black powder coating
Spray can rack
Spray can holder easily mounts on wall, tool cabinet, maintenance center or equipment
Keeps oils, aerosols, cleaners conveniently in reach.
No more searching for that missing spray paint can or bottle!
Will hold aerosol cans up to 2-5/8″ in diameter
Steel construction for durability with powder coated finish
Four drawer cabinet stores the following reamers:
Fractional Reamers 1⁄16” to 1⁄2“
Over/Under Reamers from .1240 to .5010
Dowel Pin Reamers from .1230 to .4995
Metric Reamers from 1.0mm to 13.0mm x .5
Locakable with 2 keys
#1 to #60 reamers, 5 drawer dispenser
Wire gauge sizes #1 to #60
Decimal equivalents also listed
Ideal where compact space is a must
4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes
One piece drawer slide
Finished with tough epoxy powder coating
Carbide burr dispenser, popular sizes
Holds the following sizes:
Cylindrical 1/4″ x 5/8″, Cyl. Rad. End 1/4″ x 5/8″, Ball 1/4″ x 1/4″
Oval 1/4″ x 3/8″, Tree Rad. 1/4″ x 3/4″, Tree/Pointed 1/4″ x 3/4″
Cone/Rad. End 1/4″ x 5/8″, Cylindrical 3/8″ x 3/4″, Cyl./Rad. End 3/8″ x 3/4″
Ball 3/8″, Oval 3/8″ x 5/8″, Tree/Rad. End 3/8″ x 3/4″
Tree/Pointed 3/8″ x 3/4″, Cone/Rad. End 3/8″ x 1-1/16″, Cone/Flat End 1/4″ x 1″
Cone/Rad. End 1/2″ x 1-1/8″, Cone/Flat End 3/8″ x 1″, Cylindrical 1/2″ x 1″
Cyl./Rad. End 1/2″ x 1″, Ball 1/2″, Oval 1/2″ x 7/8″
Tree/Rad. End 1/2″ x 1″, Tree/Pointed 1/2″ x 1″, Cone/Flat End 1/2″ x 1″
One piece drawer slide
Stackable
Finished with tough epoxy powder coating
Burr stand for 24 pieces, 1/4″ shank burs
Holds up 24, 1/4″ shank burrs
Drill stand can be hung on a wall, used on a bench or mounted on a press
Durably made from a single piece of prime steel, rigidly formed.
ER/DR/RD 40 series collet rack
Holds up to 27 collets or C-8 Sandvik collets, hole size 1 1/2″
Protects, stores and organizes your valuable collets
Mountable on bench top
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
40 taper direct mount rack
Mounts directly on the CNC machine or on a wall in any convenient location
Nylon inserts help protect tooling
Holds 7 tools
Heavy gauge steel
Tough, epoxy finish for long lasting protection
ER/DR/RD 32 series collet rack
Holds up to 40 collets, hole size 1 13/64″
Protects, stores and organizes your valuable collets
Mountable on bench top
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
ER/DR/RD 25 series collet rack
Holds up to 48 collets, hole size 61/64″
Protects, stores and organizes your valuable collets
Mountable on bench top
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
ER/DR/RD 20 series collet rack
Holds up to 36 collets, hole size 49/64″ or C-4 Sandvik Collets
Protects, stores and organizes your valuable collets
Mountable on bench top
Fit within 2” to 4” drawer
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
ER/DR/RD 16 series collet rack
Holds up to 49 collets, hole size 39/64″ or C-3 Sandvik collet
Protects, stores and organizes your valuable collets
Mountable on bench top
Fit within 2” to 4” drawer
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
ER/DR/RD 11 series collet rack
Holds up to 49 collets, hole size 27/64″
Protects, stores and organizes your valuable collets
Mountable on bench top
Fit within 2” to 4” drawer
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
