Huot

5C Collet Tower Individual units are 3′ tall 3 shelves holding 50 – 5C collets each Nylon inserts protect each tool holder Sturdy 16 gauge steel construction Tool Tower should be bolted to the floor for additional security Casters should never be used on a stacked CNC Tower as this could be extremely dangerous

Read more less

CNC Tool Tower for 30 taper tool holders Individual units are 3′ tall 3 shelves – 24 toolholders per shelf Nylon inserts protect each tool holder Sturdy 16 gauge steel construction Tool Tower should be bolted to the floor for additional security Casters should never be used on a stacked CNC Tower as this could be extremely dangerous

Read more less

Huot TriScoot CNC Tool Cart for Capto C6 The world famous Huot ToolScoot is available with 3 shelves for even more storage space in the same footprint. This cart is ruggedly built just like the original but with a third more capacity and standing almost 7″ taller. Three shelves with 24 openings each = 72 total for Capto C6 tooling storage

Read more less

The world famous Huot ToolScoot is available with 3 shelves for even more storage space in the same footprint. This cart is ruggedly built just like the original but with a third more capacity and standing almost 7″ taller. Three shelves with 24 openings each = 72 total for Capto C5 tooling storage

Read more less

TriScoot CNC Tool Cart for Capto C4 The world famous Huot ToolScoot is available with 3 shelves for even more storage space in the same footprint. This cart is ruggedly built just like the original but with a third more capacity and standing almost 7″ taller. Three shelves with 24 openings each = 72 total for Capto C4 tooling storage

Read more less

Huot TriScoot CNC Tool Cart Capto C3 The world famous Huot ToolScoot is available with 3 shelves for even more storage space in the same footprint. This cart is ruggedly built just like the original but with a third more capacity and standing almost 7″ taller. Three shelves with 24 openings each = 72 total for Capto C3 tooling storage

Read more less

ToolScoot Limited 50 Taper CNC Tool Cart • Ideal for special ops applications • Total toolholder capacity of 18 • Molded inserts protect and securely hold toolholders • Sturdy steel construction with scratch resistant powder finish • Drawers use full extension ball bearings slides • 2″ drawer with welded columns and adjustable dividers • 6″ drawer has two sets of ball bearing slides for larger tools and greater weight capacity • Welded chassis adds strength and rigidity • Minimal assembly required, simply bolt on casters • Side tray holds collet racks, tool changing vise or miscellaneous tools • Grab handle for easy maneuverability • Dimensions are 41″ L x 35.25″ H x 18″ D • Casters are load rated to 1600 lbs Shipping weight is 92 lbs, LTL shipping only.

Read more less

The Huot Step Drill Dispenser gives you plenty of organizational capacity in a compact, handy size.Store your step drills (and center drills if you use them) in tidy compartments that are each roomy enough to hold multiple bits. Use our pre printed labels or create your own using our pro label holder system (included) Adjacent compartments can hold additional step drills of the same size, different sizes, corresponding center drills, etc. Pre-labeled for 1/8″ to 1-3/8″ sizes

Read more less

Huot ToolScoot Limited 40 Taper CNC Tool Cart • Ideal for special ops applications • Total toolholder capacity of 24 • Molded inserts protect and securely hold toolholders • Sturdy steel construction with scratch resistant powder finish • Drawers use full extension ball bearings slides • 2″ drawer with welded columns and adjustable dividers • 6″ drawer has two sets of ball bearing slides for larger tools and greater weight capacity • Welded chassis adds strength and rigidity • Minimal assembly required, simply bolt on casters • Side tray holds collet racks, tool changing vise or miscellaneous tools • Grab handle for easy maneuverability • Dimensions are 41″ L x 35.25″ H x 18″ D • Casters are load rated to 1600 lbs Shipping weight is 92 lbs, LTL shipping only.

Read more less

Counterbore Dispenser, Original All steel cabinet with vinyl drawer dividers to help protect and separate counterbores. Stackable with all Huot “Original” style dispensers. Holds continuous pilot counterbores sizes #4, #5, #6,#8, #10, #12, ¼”, 5/16”, 3/8”, 7/16”, & ½”.

Read more less

NPT dispenser Holds all sizes of National Pipe Taps (NPT) from 1/16” to 2” Top drawer has 13 compartments; 2 for 1/16” – 27, 2 for 1/8” – 27, 3 for 1/4” – 18, 3 for 3/8” – 18, 3 for 1/2” – 14, Middle drawer has 6 compartments – 3 for 3/4” – 14, 2 for 1” – 11-1/2”, and 1 oversized compartment for 1-1/4” – 11-1/2” Bottom drawer has 2 oversized compartments – 1 for 1-1/2” – 11-1/2”, and 1 for 2” – 11-1/2” Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating

Read more less

Huot TriScoot CNC Tool Cart for 50 Taper Toolholders Increased storage compared to the world famous Huot ToolScoot This cart is ruggedly built just like the original, but with a third more capacity and standing almost 7″ taller. Cart holds up to 54 BT, CAT V Flange, NMBT 50 taper toolholders.

Read more less

Master Dispenser Stand*  Easy & convenient tool selection without bending over*  Adjustable feet provide easy leveling*  Rigid steel construction*  Master Dispensers fit neatly into the top of the stand*  Assembles in just minutes*  Black texture powder coat finish for long life Stand raises your Master Dispenser approximately 26″

Read more less

Master Dispenser Stand*  Easy & convenient tool selection without bending over*  Adjustable feet provide easy leveling*  Rigid steel construction*  Master Dispensers fit neatly into the top of the stand*  Easily assembles in just minutes*  Black texture powder‐cote finish for long life Stand raises your Master Dispenser approximately 12”

Read more less

Huot Master Dispenser for Measuring Tools Ever wonder why your measuring tools are so beat up? Put those expensive and valuable tools in their own dedicated cabinet. Sturdy steel construction Durable gray powder coating finish Designed for vernier calipers, micrometers, etc. Stackable with other Huot Masters using stacking clips, included Oil and grease resistant foam drawer liners provide a soft storage surface 3 drawers provide ample storage Ball bearing drawer slides for smooth operation Dispenser locks for added security. Includes 2 keys.

Read more less

Huot TriScoot CNC Tool Cart for 30 Taper Toolholders The world famous Huot ToolScoot is now available with 3 shelves for even more storage in the same footprint. This cart is ruggedly built just like the original, but with a third more capacity and standing almost 7″ taller. EDP 13309 holds up to 72 BT, CAT V Flange, NMBT 30 taper toolholders.

Read more less

1/16″ to 1/2″ x 64ths counter display for jobbers drills All steel welded outer shell Clear, hinged polycarbonate front for high visibility and shatterproof durability Lockable with own set of two keys Steel drill gauge on top assures correct sizing of drills All compartments display drills vertically to use less counter space, and are rounded to make small drills readily accessible Attractive, Royal Blue finish (Red shown in photo) Compact, takes less counter space Makes excellent use of counter space for impulse sales

Read more less

1mm to 6.9mm by .1mm 1mm to 6.9mm by .1mm stub Holds full packages of each size – (12 pc. Min.) Stackable for larger inventories. One piece drawer slide for long useful life. Decimal equivalents.

Read more less

Aircraft Extension Drill Index Holds 6” OAL aircraft extension bits from 1/16” to ½” x 64ths”.

Read more less