Holds 29 mechanics* length drills from 1/16"-1/2" by 64ths*Note: If your 1/2" drill bit is 5" OAL, order this Mechanics* Length Bit BuddyClip-on cup drill indexHigh impact, break resistant plastic *• Water resistant, great for outdoor jobsites *• Fast, quarter turn cover secures dome to top of Bit BuddyIf the Bit Buddy gets dropwith the cover on, the drill bits stay in place,Cutting tools shown for display purposes only. Huot does not manufacture nor distribute cutting toolsadditional; Weight 0.75 lbsDimensions 3.75 × 6.5 in
1/16″ to 1/2″ x 64ths drill stand
Drill stand can be hung on a wall, used on a bench or mounted on a press
Durably made from a single piece of prime steel, rigidly formed
1/2″ to 1″ by 64ths drill stand, stub, jobbers, machine screw held by flute
For jobbers, stub or screw machine length, and taper length/ taper shank from 1/2″ to 1″ by 64ths.
Fractional sizing permanently embossed into the stand
Powder coat finish
1/2″ to 1″ x 64ths stand S&D drills only
For Silver Deming drills from 1/2″ to 1″ by 64ths “held by shank”
Fractional sizes clearly marked
Baked epoxy finish
1/16″ to 1/2″ x 64ths reamer indexChucking reamers 1/16″ to 1/2″ by 64thsAll-steel reamer casesHolds reamer securely by the shank to help protect delicate cutting edgesIndexed for reamer size in decimal equivalentsRaised embossed lettering for permanent identificationEach storage hole precisely sized for accurate, quick tool selectionCorrosion resistant, epoxy baked on coatingSecure, snap-lock steel coverRugged, heavy gauge all–steel caseadditional; Weight 3 lbsDimensions 4 × 8.3125 × 1.1875 in
For jobbers length fractional drills 1/16" to 1/2" x 64thsDecimal equivalents and US tap informationEach storage hole precisely sized for accurate, quick drill selectionFits in 2" deep tool drawerCorrosion resistant, epoxy baked on coatingSecure, snap-lock steel coverRugged, heavy gauge all–steel caseNSN: 5140-00-277-8835REF:NSN 00-250-2529 002502529 5140-00-250-2529Additional: Weight 2 lbsDimensions 4 × 7 × 1.75 in
1/2" to 23/32" S D drillsHolds 15 Silver Deming drills 1/2" to 23/32" by 64thsOne of three index cases to complete S/D drills from ½” to 1” by 64thsAll-steel reamer casesEach storage hole precisely sized for accurate, quick tool selectionCorrosion resistant, epoxy baked on coatingSecure, snap-lock steel coverRugged, heavy gauge all–steel caseCutting tools shown for display purposes only. Huot does not manufacture or distribute cutting toolsAdditional; Weight 2.5 lbsDimensions 8.5 × 6.25 × 2 in
Fractional from 1/16″ to 1/2″ x 64ths
Decimal equivalents and US tap information
Each storage hole precisly sized for accurate, quick tool selection
Fits in 2″ deep tool drawer
Corrosion resistant, epoxy baked on coating
Secure, snap-lock steel cover
Rugged, heavy gauge all–steel case
Holds 29 jobbers* length drills from 1/16"-1/2" by 64ths*Note: If your 1/2" drill bit is 6" OAL, order this Jobbers Length Bit BuddyClip-on cup drill indexHigh impact, break resistant plastic *• Water resistant, great for outdoor jobsites *Fast, quarter turn cover secures dome to top of Bit BuddyDrills stay in Bit Buddy if dropped and cover is onSizes marked next to holesIf the Bit Buddy gets dropped, with the cover on, the drill bits stay in placeCutting tools shown for display purposes only. Huot does not manufacture nor distribute cutting toolsAdditional: Weight Weight 0.75 lbsDimensions 3.75 × 6.5 in
1/16″ to 1/2″ x 64ths stub screw machine length drillsHolds full packages of each size (12 pc. Min.) *Stackable for larger inventories. *One-piece drawer slide for long useful life. *Decimal equivalents. *Marked for screw machine length to help control inventory.Additional: Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in
1/16″ to 1/2″ x 64ths jobbers drills• Holds full packages of each size (12 pc. Min.)• Stackable for larger inventories• One piece drawer slide for long useful life• Decimal equivalentsAdditional: Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in Review: There are no reviews yet.
Category: Master Drill Dispensers U.S. SizesHolds full packages (minimum of 12 pcs.) of jobber or screwmachine length drills, fractional, letter and wire gauge sizes in onecomplete cabinet.• Top drawer holds fractional drills 1⁄16” to 1⁄2” by 64th with 42 compartments.• 2nd drawer is for #1 to #60 wire gauge with 75 compartments.• 3rd drawer for letter size A to Z with 42 compartments.• Bottom drawer is empty for additional storageBall bearing slides for easy drawer operation.Lockable, with 2 keys. Can be stacked for larger inventories.Dimensions: 26″ W x 12″ D x 121⁄2” H.Weight: 50 lbs.
1/16″ to 1/2″ reamers, 4 drawer dispenser
Fractional Reamers 1/16″ to 1/2″ by 64ths
Decimal equivalents also listed
Ideal where compact space is a must
4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes
One piece drawer slide
Finished with tough epoxy powder coating
Fractional drills 1/16″ to 1/2″ by 64ths
Out-of-the way convenience
Security – Built-in cam lock and two keys
Heavy-duty ball bearing drawer slides
Time saving – cutting tools are stored away in their proper location making it fast and easy to find the right tool
Each space clearly marked for the proper tool
Decimal equivalent shown under each size too
Overall Dimensions: 24.192″ W x 12.453″ D x 4.500″ H
Drawer Dimensions: 23.125″ W x 11.000″ D x 3.000″ H
S&D Drills 1″ to 1-1/2″ assorted
Holds 2 each
Reduced shank S/D bits
From 1″, 1-1/32, 1-1/16, 1-1/8, 1-5/32, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2
Label holders on drawer fronts permit easy, quick identification and inventory check
One piece drawer slide
Stackable with other cutting tool storage cabinets to save space
Finished with tough epoxy powder coating
Vinyl webbing 100′ 1/4″ to 1/2
Woven of tough, flexible and stretchable polyethylene netting
Sleeve mesh netting
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
Vinyl webbing 100′ 1/2″ to 1
Woven of tough, flexible and stretchable polyethylene
Sleeve mesh netting
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
Vinyl webbing 50′ 1″ to 1-1/2″
Woven of tough, flexible and stretchable polyethylene netting
Sleeve mesh netting
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
50′ 2″ to 2.5″ protective polyethylene webbing
Woven of tough, flexible and stretchable polyethylene
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
