Loc-Line 1/2"

1/2″ to 1″ drill gaugeFor measuring tools 1/2″ to 1″ by 64thsAdditional: Dimensions 13 × 5 in

Read more less

1/16″ to 1/2″ x 64ths stub screw machine length drillsHolds full packages of each size (12 pc. Min.) *Stackable for larger inventories. *One-piece drawer slide for long useful life. *Decimal equivalents. *Marked for screw machine length to help control inventory.Additional: Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

1/16″ to 1/2″ x 64ths jobbers drills• Holds full packages of each size (12 pc. Min.)• Stackable for larger inventories• One piece drawer slide for long useful life• Decimal equivalentsAdditional: Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in Review: There are no reviews yet.

Read more less

Category: Master Drill Dispensers U.S. SizesHolds full packages (minimum of 12 pcs.) of jobber or screwmachine length drills, fractional, letter and wire gauge sizes in onecomplete cabinet.• Top drawer holds fractional drills 1⁄16” to 1⁄2” by 64th with 42 compartments.• 2nd drawer is for #1 to #60 wire gauge with 75 compartments.• 3rd drawer for letter size A to Z with 42 compartments.• Bottom drawer is empty for additional storageBall bearing slides for easy drawer operation.Lockable, with 2 keys. Can be stacked for larger inventories.Dimensions: 26″ W x 12″ D x 121⁄2” H.Weight: 50 lbs.

Read more less

1/16″ to 1/2″ x 64ths drill gaugeFor measuring 1/16″ to 1/2″ by 64ths drill bitsADDITIONAL INFORMATION: Dimensions 6 × 3 in

Read more less

1/16″ to 1/2″ reamers, 4 drawer dispenser Fractional Reamers 1/16″ to 1/2″ by 64ths Decimal equivalents also listed Ideal where compact space is a must 4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes One piece drawer slide Finished with tough epoxy powder coating

Read more less

Fractional drills 1/16″ to 1/2″ by 64ths Out-of-the way convenience Security – Built-in cam lock and two keys Heavy-duty ball bearing drawer slides Time saving – cutting tools are stored away in their proper location making it fast and easy to find the right tool Each space clearly marked for the proper tool Decimal equivalent shown under each size too Overall Dimensions: 24.192″ W x 12.453″ D x 4.500″ H Drawer Dimensions: 23.125″ W x 11.000″ D x 3.000″ H

Read more less

S&D Drills 1″ to 1-1/2″ assorted Holds 2 each Reduced shank S/D bits From 1″, 1-1/32, 1-1/16, 1-1/8, 1-5/32, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating

Read more less

Vinyl webbing 100′ 1/4″ to 1/2 Woven of tough, flexible and stretchable polyethylene netting Sleeve mesh netting Great protection for delicate edges of cutting tools Doubles/triples storage capacity of any drawer Reusable. Slips on and off easily Elasticity assures snug fit and non-slip grip Easily cut to any length Inexpensive protection

Read more less

Vinyl webbing 100′ 1/2″ to 1 Woven of tough, flexible and stretchable polyethylene Sleeve mesh netting Great protection for delicate edges of cutting tools Doubles/triples storage capacity of any drawer Reusable. Slips on and off easily Elasticity assures snug fit and non-slip grip Easily cut to any length Inexpensive protection

Read more less

Vinyl webbing 50′ 1″ to 1-1/2″ Woven of tough, flexible and stretchable polyethylene netting Sleeve mesh netting Great protection for delicate edges of cutting tools Doubles/triples storage capacity of any drawer Reusable. Slips on and off easily Elasticity assures snug fit and non-slip grip Easily cut to any length Inexpensive protection

Read more less

Aircraft Extension Drill Index Holds 6” OAL aircraft extension bits from 1/16” to ½” x 64ths”.

Read more less

50′ 2″ to 2.5″ protective polyethylene webbing Woven of tough, flexible and stretchable polyethylene Great protection for delicate edges of cutting tools Doubles/triples storage capacity of any drawer Reusable. Slips on and off easily Elasticity assures snug fit and non-slip grip Easily cut to any length Inexpensive protection

Read more less

50′ 2.5″ to 3″ protective polyethylene webbing Woven of tough, flexible and stretchable polyethylene Sleeve mesh netting Great protection for delicate edges of cutting tools Doubles/triples storage capacity of any drawer Reusable. Slips on and off easily Elasticity assures snug fit and non-slip grip Easily cut to any length Inexpensive protection

Read more less

LOC-LINE 51832-1/2" 90 Degree Nozzle Kit Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 59892-1/2" Flat 5 Hole Nozzle - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 51846 1/2" Magnetic Base Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 51846 1/2" Magnetic Base Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less