LOC-LINE 59861 1/2" 50 Foot Coil
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 78001 1/4" Hose Assembly Pliers - Pack of 1
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41401 1/4" Hose Segment - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 69549 3/4" BSPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 61517 3/4" Female NPT Valve - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 61516 3/4" Male NPT Valve - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 61509 3/4" BSPT Connector - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 61501 3/4" Hose Segment Pack - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 89320AS 2-1/2" Anti-Static Vacuum Hose 20pc (1 ft Segments)
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 89230 Shop Vacuum Canister Adaptor - Pack of 10
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 89229 Shop Vacuum Hose Adapt.with Mounting Tab-Pack of 10
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 89228 2-1/2" Slide Valve - Pack of 10
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 89227 3" Sheet Metal Duct Adaptor - Pack of 10
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 89220 2-1/2" Vacuum Hose 20pc (1 ft Segments)
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 81210 Shop Vacuum Canister Adaptor - Pack of 1
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 81209 Shop Vacuum Hose Adapt.with Mounting Tab - Pack of 1
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 81208 2-1/2" Slide Valve - Pack of 1
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 81207 3" Sheet Metal Duct Adaptor - Pack of 1
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 81202 2-1/2" Vacuum Hose 2pc (1 ft Segment)
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 81201 Vacuum Hose - 9 Elements 2.5" ID - 1pc (1 ft Segment)
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 80813 Shop Vacuum Kit
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 79000 Adjustment Lever for HPT Nozzles Blue Pack of 10
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 78004 3/4" Hose Assembly Pliers
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 78003 1/4" and 1/2" Hose Assembly Plier Set - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 78002-1/2" Hose Assembly Pliers
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72095 HPT (XR Style) W/Adj Lever Noz = .160X1.25 Thread = 1/4" Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72094 HPT (XR Style) W/Adj Lever Noz = .160X.5 Thread = 1/4" Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72093 HPT (XR Style) W/Adj Lever Noz = .160X.25 Thread = 1/4" Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72092 HPT (XR Style) Noz = .160X0 Thread = 1/4" Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72091 HPT (XR Style) W/Adj Lever Noz = .117X1.25 Thread = 1/4" Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72090 HPT (XR Style) W/Adj Lever Noz = .117X.5 Thread = 1/4″ Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72089 HPT (XR Style) W/Adj Lever Noz = .117X.25 Thread = 1/4″ Pack of 10
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72088 HPT (XR Style) Noz = .117X0 Thread = 1/4″ Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72087 HPT (XR Style) W/Adj Lever Noz = .086X1.25 Thread = 1/4" Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72086 HPT (XR Style) W/Adj Lever Noz = .086X.5 Thread = 1/4" Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 72085 HPT (XR Style) W/Adj Lever Noz = .086X.25 Thread = 1/4" Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
