LOC-LINE 49436 1/4" T Fitting - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49435 1/4" Elbow - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49434 1/4" SAE Flare Nut Adapter - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49432 3/8" Flare Nut Adapter for 1/4" System - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49431 1/4" Socket to 1/8" FNPT - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49429 1/4" Double Socket - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49428 - 1/4" Y Fitting - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49427 1" Flare Nozzle - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49426 1/4" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49425 1/8" NPT Connector - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49424 1/4" Round Nozzle, 1/4" System - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49423 1/8" Round Nozzle - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49422 1/16" Round Nozzle - Pack of 50
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49421 1/4" 50 Foot Coil
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49420 1/4" Hose Segments (55pc) Bulk 25 ft
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 49419 1/4" - 5 Foot Coil
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 42400 ProStream Nozzle Kit .160x1.25
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41757 1/4" Female Pipe Coupling - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41756 1/8" Female Pipe Coupling - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41755 1/4" to 1/8" Female Pipe Reducer - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41754 1/4" Pipe Plug - Pack of 20
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41495 HAAS X 2" Lathe Adapter 4pc
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41494 HAAS X Short Lathe Adapter - 4pc
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41493 15mm X 2" Lathe Adapter - 4pc
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41492 15mm X Short Lathe Adapter - 4pc
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41491 1/4" Extended Elbows - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41490 1/4" Nozzle-Rama Pack - 1 of each (20 Nozzles)
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41489 1" Straight Flow Nozzle - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41488 2-1/2" Swivel Nozzle 75 for 1/4" - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41487 1/4" Flat Nozzle Assortment Pack
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41486 Flat 7 Hole Nozzle - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41485 Flat 5 Hole Nozzle - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41484 Flat Slot 60 Nozzle - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41483 Flat Slot 40 Nozzle - Pack of 4
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41482 1/4 Swivel Nozzle 60 - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.
LOC-LINE 41481 1/4" Swivel Nozzle 40 - Pack of 2
Material Properties: Acetal
Chemical Compatibility:
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
1/4" System: 50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps)
1/2" System: 30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps)
3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps)
Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact.
All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297.
Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature.
This material meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
Lockwood Products Inc. does not warrant any particular application for it's products.