Solid Marker Low Temperature offered in both standard and slim sizes is a permanent solidified paint marker formulated for cold temperature environments. The tough marker for tough jobs, Solid Marker marks almost any surface, dry or wet, dusty, rusty or rough. This solidifed paint marker allows users to mark at any angle, sideways or upside down with no dripping. To advance, simply twist-up the Low Temperature (LT) marker or push the bottom of the Low Temperature Slim (LTS) marker. Solid Marker is ready for immediate use and marks smoothly from the start. The 13mm regular and 10mm slim tips can be trimmed with a blade for finer marks.
Specifically formulated for cold temperatures, this marker works indoors or outdoors even when it is raining or snowing. The quick-drying formula dries permanently within 5 to 7 minutes.* Marks are waterproof (except on glass) and fade-resistant. Certified non-toxic, SDS sheets available upon request.
*Note: marks may be removed from most non-porous surfaces with alcohol based solvents and scrubbing. Not waterproof on glass and will not work on wet glass.
Used For
Ceramics
Cloth and Fabric
Concrete
Glass
Plastics and PVC
ABS
Rubber
Steel and Iron
Wood
Paper and Cardboard
Fiberglass and Concrete
Technical Qualities
Operates in cold temperatures as low as -40°F
Handy applicator marks smoothly from the first stroke
Marks virtually any material or surface
Highly permanent once dry
Waterproof** and fade resistant
Mess free – no drips, pooling, or runs
Fast drying – dries within minutes
Fail proof – no tip that can clog or wear off
Marks instantly – no shaking or pumping required to start
Marks at any angle, upside down, or even underwater
Dry-out resistant – recapped after use, paint remains fresh for a long time
**except on glass
Solid Marker is a solidified paint in a marker form offered in both standard and slim sizes. It marks through dust, rust, water – inside or outside on smooth or rough surfaces. Dries within minutes and is permanent once dry. Solid Marker won’t fade or wash off like chalk. The twist mechanism keeps paint fresh and ready to use. Solid Marker features a tough, broad stroke, quick dry time, low odor and is non-toxic.
This marker is widely used in commercial and industrial applications in construction, welding and fabrication, pipelines and drilling, assembly lines, automotive tires and windshields, HVAC, plumbing systems or with stencils. The 13 mm regular and 10 mm slim markers can both be trimmed with a knife for smaller marks. The Solid Marker is available in 11 colors including 3 fluorescent colors that offer higher visibility especially in low light conditions.
Note: Alcohol-based cleaners will remove marks from most non-porous surfaces. Fluorescent colors reflect under UV light and offer higher visibility in low light conditions
Used For
Ceramics
Cloth/Fabric
Concrete
Glass
Plastics/PVC
ABS
Rubber
Steel/Iron
Wood
Paper/Cardboard
Technical Qualtities
Handy applicator marks smoothly from the first stroke
Marks virtually any material or surface
Highly permanent once dry
Waterproof and fade resistant on all 8 standard marker colors only. Fluorescent markers work best indoors as they are not U/V fast and are not fade resistant when exposed to sunlight
Mess free — no drips, pooling, or runs
Fast drying — dries within minutes
Fail proof – no tip that can clog or wear off
Marks instantly — no shaking or pumping required to start
Marks at any angle, upside down, or even underwater
Dry-out resistant — recapped after use, paint remains fresh for a long time
SDS sheets available upon request
