1/4" Accessories

136 products

  • Low stock! FALSE

    LOC-LINE LOC-LINE 59885 1/2" End Cap for 1/2" System, Pack of 20

    3 in stock

    LOC-LINE 59885 1/2" End Cap - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    3 in stock

    $23.76

  • Low stock! FALSE LOC-LINE 59884 1/2" Element Clamp for 1/2" System, Pack of 20

    LOC-LINE LOC-LINE 59884 1/2" Element Clamp for 1/2" System, Pack of 20

    1 in stock

    LOC-LINE 59884 1/2" Element Clamp - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    1 in stock

    $38.47

  • FALSE LOC-LINE 59875 1/2" T Fitting for 1/2" System, Pack of 20

    LOC-LINE LOC-LINE 59875 1/2" T Fitting for 1/2" System, Pack of 20

    Online special order

    LOC-LINE 59875 1/2" T Fitting - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $77.85

  • Low stock! FALSE LOC-LINE 59870 1/2" to 1/4" Y Reducer - Pack of 20

    LOC-LINE LOC-LINE 59870 1/2" to 1/4" Y Reducer - Pack of 20

    2 in stock

    LOC-LINE 59870 1/2" to 1/4" Y Reducer - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    2 in stock

    $62.38

  • FALSE LOC-LINE 59869 1/2" to 1/4" Adapter - Pack of 20

    LOC-LINE LOC-LINE 59869 1/2" to 1/4" Adapter - Pack of 20

    15 in stock

    LOC-LINE 59869 1/2" to 1/4" Adapter - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    15 in stock

    $56.44

  • FALSE

    LOC-LINE LOC-LINE 59868 1/2" Y Fitting for 1/2" System, Pack of 20

    55 in stock

    LOC-LINE 59868 1/2" Y Fitting - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    55 in stock

    $62.38

  • Low stock! FALSE

    LOC-LINE LOC-LINE 51838 1/2" End Cap for 1/2" System, Pack of 4

    4 in stock

    LOC-LINE 51838 1/2" End Cap - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    4 in stock

    $6.01

  • FALSE LOC-LINE 51834 1/2" Element Clamp for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 51834 1/2" Element Clamp for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 51834 1/2" Element Clamp - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $10.35

  • FALSE LOC-LINE 51825 1/2" T Fitting for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 51825 1/2" T Fitting for 1/2" System, Pack of 2

    Online special order

    LOC-LINE 51825 1/2" T Fitting - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $9.84

  • Low stock! FALSE LOC-LINE 51822 - 1/2" to 1/4" Y Reducer for 1/4" System, Pack of 2

    LOC-LINE LOC-LINE 51822 - 1/2" to 1/4" Y Reducer for 1/4" System, Pack of 2

    3 in stock

    LOC-LINE 51822-1/2" to 1/4" Y Reducer - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    3 in stock

    $8.99

  • Low stock! FALSE

    LOC-LINE LOC-LINE 51821 1/2" to 1/4" Adapter for 1/2" System, Pack of 2

    6 in stock

    LOC-LINE 51821 1/2" to 1/4" Adapter - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    6 in stock

    $6.62

  • FALSE

    LOC-LINE LOC-LINE 51811 1/2" Double Socket for 1/2" System, Pack of 4

    8 in stock

    LOC-LINE 51811 1/2" Double Socket - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    8 in stock

    $6.71

  • Low stock! FALSE

    LOC-LINE LOC-LINE 51808 1/2" Y Fitting for 1/2" System, Pack of 2

    4 in stock

    LOC-LINE 51808 1/2" Y Fitting - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    4 in stock

    $8.99

  • Low stock! FALSE LOC-LINE 49447 1/4" End Cap for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 49447 1/4" End Cap for 1/4" System, Pack of 20

    2 in stock

    LOC-LINE 49447 1/4" End Cap - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    2 in stock

    $20.79

  • Low stock! FALSE

    LOC-LINE LOC-LINE 49446 1/4" Element Clamp for 1/4" System, Pack of 20

    2 in stock

    LOC-LINE 49446 1/4" Element Clamp - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    2 in stock

    $33.41

  • Low stock! FALSE LOC-LINE 49436 1/4" T Fitting for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 49436 1/4" T Fitting for 1/4" System, Pack of 20

    2 in stock

    LOC-LINE 49436 1/4" T Fitting - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    2 in stock

    $69.17

  • FALSE LOC-LINE 49434 1/4" SAE Flare Nut Adapter for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 49434 1/4" SAE Flare Nut Adapter for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 49434 1/4" SAE Flare Nut Adapter - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $31.19

  • FALSE LOC-LINE 49432 3/8" Flare Nut Adapter for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 49432 3/8" Flare Nut Adapter for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 49432 3/8" Flare Nut Adapter for 1/4" System - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $31.19

  • FALSE LOC-LINE 49431 1/4" Socket to 1/8" FNPT for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 49431 1/4" Socket to 1/8" FNPT for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 49431 1/4" Socket to 1/8" FNPT - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $26.47

  • Low stock! FALSE LOC-LINE 49429 1/4" Double Socket for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 49429 1/4" Double Socket for 1/4" System, Pack of 20

    2 in stock

    LOC-LINE 49429 1/4" Double Socket - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    2 in stock

    $23.15

  • FALSE

    LOC-LINE LOC-LINE 49428 - 1/4" Y Fitting for 1/4" System, Pack of 20

    15 in stock

    LOC-LINE 49428 - 1/4" Y Fitting - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    15 in stock

    $56.44

  • Low stock! FALSE LOC-LINE 41480 1/4" End Cap for 1/4" System, Pack of 4

    LOC-LINE LOC-LINE 41480 1/4" End Cap for 1/4" System, Pack of 4

    3 in stock

    LOC-LINE 41480 1/4" End Cap - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    3 in stock

    $5.25

  • FALSE

    LOC-LINE LOC-LINE 41477 1/4" Element Clamp for 1/4" System, Pack of 4

    Online special order

    LOC-LINE 41477 1/4" Element Clamp - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $8.82

  • Low stock! FALSE

    LOC-LINE LOC-LINE 41416 1/4'' T Fitting for 1/4" System, Pack of 2

    5 in stock

    LOC-LINE 41416 1/4'' T Fitting - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    5 in stock

    $8.82

Login

Forgot your password?

Don't have an account yet?
Create account