3/4" Acid Resistant

60 products

  • FALSE LOC-LINE 46436 Acid Resistant 1/4" T Fitting for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 46436 Acid Resistant 1/4" T Fitting for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 46436 Acid Resistant 1/4" T Fitting - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $86.54

  • FALSE LOC-LINE 46449 Acid Resistant 1/4" Swivel Nozzle 40 for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 46449 Acid Resistant 1/4" Swivel Nozzle 40 for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 46449 Acid Resistant 1/4" Swivel Nozzle 40 - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $113.41

  • FALSE LOC-LINE 46450 Acid Resistant 1/4" Swivel Nozzle 60 for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 46450 Acid Resistant 1/4" Swivel Nozzle 60 for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 46450 Acid Resistant 1/4" Swivel Nozzle 60 - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $113.41

  • FALSE LOC-LINE 56801 Acid Resistant 1/2" Hose Segment Pack for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 56801 Acid Resistant 1/2" Hose Segment Pack for 1/2" System, Pack of 2

    Online special order

    LOC-LINE 56801 Acid Resistant 1/2" Hose Segment Pack - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $11.21

  • FALSE LOC-LINE 56803 Acid Resistant 1/2" Round Nozzle for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 56803 Acid Resistant 1/2" Round Nozzle for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 56803 Acid Resistant 1/2" Round Nozzle - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $7.48

  • FALSE LOC-LINE 56802 Acid Resistant 3/8" Round Nozzle for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 56802 Acid Resistant 3/8" Round Nozzle for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 56802 Acid Resistant 3/8" Round Nozzle - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $7.48

  • FALSE LOC-LINE 56804 Acid Resistant 3/8" NPT Connector for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 56804 Acid Resistant 3/8" NPT Connector for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 56804 Acid Resistant 3/8" NPT Connector - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $7.48

  • FALSE LOC-LINE 56805 Acid Resistant 1/2" NPT Connector for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 56805 Acid Resistant 1/2" NPT Connector for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 56805 Acid Resistant 1/2" NPT Connector - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $7.48

  • FALSE LOC-LINE 56806 Acid Resistant 1/4" Round Nozzle for 1/2" for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 56806 Acid Resistant 1/4" Round Nozzle for 1/2" for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 56806 Acid Resistant 1/4" Round Nozzle for 1/2" - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $7.48

  • FALSE LOC-LINE 56807 Acid Resistant 1-1/4" Flare Nozzle for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 56807 Acid Resistant 1-1/4" Flare Nozzle for 1/2" System, Pack of 2

    Online special order

    LOC-LINE 56807 Acid Resistant 1-1/4" Flare Nozzle - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $11.21

  • FALSE LOC-LINE 56808 Acid Resistant 1/2" Y Fitting for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 56808 Acid Resistant 1/2" Y Fitting for 1/2" System, Pack of 2

    Online special order

    LOC-LINE 56808 Acid Resistant 1/2" Y Fitting - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $10.80

  • FALSE LOC-LINE 56811 Acid Resistant 1/2" Double Socket for 1/2" System, Pack of 4

    LOC-LINE LOC-LINE 56811 Acid Resistant 1/2" Double Socket for 1/2" System, Pack of 4

    Online special order

    LOC-LINE 56811 Acid Resistant 1/2" Double Socket - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $6.71

  • FALSE LOC-LINE 56821 Acid Resistant 1/2" to 1/4" Adapter for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 56821 Acid Resistant 1/2" to 1/4" Adapter for 1/2" System, Pack of 2

    Online special order

    LOC-LINE 56821 Acid Resistant 1/2" to 1/4" Adapter - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $7.99

  • FALSE LOC-LINE 56822 Acid Resistant 1/2" to 1/4" Y Reducer for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 56822 Acid Resistant 1/2" to 1/4" Y Reducer for 1/2" System, Pack of 2

    Online special order

    LOC-LINE 56822 Acid Resistant 1/2" to 1/4" Y Reducer - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $10.80

  • FALSE LOC-LINE 56824 Acid Resistant 1/2" Elbow for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 56824 Acid Resistant 1/2" Elbow for 1/2" System, Pack of 2

    Online special order

    LOC-LINE 56824 Acid Resistant 1/2" Elbow - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $9.18

  • FALSE LOC-LINE 56825 Acid Resistant 1/2" T Fitting for 1/2" System, Pack of 2

    LOC-LINE LOC-LINE 56825 Acid Resistant 1/2" T Fitting for 1/2" System, Pack of 2

    Online special order

    LOC-LINE 56825 Acid Resistant 1/2" T Fitting - Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $11.07

  • FALSE LOC-LINE 57862 Acid Resistant 3/8" Round Nozzle for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 57862 Acid Resistant 3/8" Round Nozzle for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 57862 Acid Resistant 3/8" Round Nozzle - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $74.25

  • FALSE LOC-LINE 57863 Acid Resistant 1/2" Round Nozzle for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 57863 Acid Resistant 1/2" Round Nozzle for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 57863 Acid Resistant 1/2" Round Nozzle - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $74.25

  • FALSE LOC-LINE 57864 Acid Resistant 3/8" NPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 57864 Acid Resistant 3/8" NPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 57864 Acid Resistant 3/8" NPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $74.25

  • FALSE LOC-LINE 57865 Acid Resistant 1/2" NPT Connector for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 57865 Acid Resistant 1/2" NPT Connector for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 57865 Acid Resistant 1/2" NPT Connector - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $74.25

  • FALSE LOC-LINE 57866 Acid Resistant 1/4" Round Nozzles for 1/2" for 1/2" System, Pack of 50

    LOC-LINE LOC-LINE 57866 Acid Resistant 1/4" Round Nozzles for 1/2" for 1/2" System, Pack of 50

    Online special order

    LOC-LINE 57866 Acid Resistant 1/4" Round Nozzles for 1/2" - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $74.25

  • FALSE LOC-LINE 57867 Acid Resistant 1-1/4" Flare Nozzle for 1/2" System, Pack of 20

    LOC-LINE LOC-LINE 57867 Acid Resistant 1-1/4" Flare Nozzle for 1/2" System, Pack of 20

    Online special order

    LOC-LINE 57867 Acid Resistant 1-1/4" Flare Nozzle - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $77.85

  • FALSE LOC-LINE 57868 Acid Resistant 1/2" Y Fitting for 1/2" System, Pack of 20

    LOC-LINE LOC-LINE 57868 Acid Resistant 1/2" Y Fitting for 1/2" System, Pack of 20

    Online special order

    LOC-LINE 57868 Acid Resistant 1/2" Y Fitting - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $74.80

  • FALSE LOC-LINE 57869 Acid Resistant 1/2" to 1/4" Adapter for 1/2" System, Pack of 20

    LOC-LINE LOC-LINE 57869 Acid Resistant 1/2" to 1/4" Adapter for 1/2" System, Pack of 20

    Online special order

    LOC-LINE 57869 Acid Resistant 1/2" to 1/4" Adapter - Pack of 20 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

    Online special order

    $67.64

Login

Forgot your password?

Don't have an account yet?
Create account