3/4" Acid Resistant

60 products

  • FALSE LOC-LINE 45415 Acid Resistant 1/4" Elbow for 1/4" System, Pack of 2

    LOC-LINE LOC-LINE 45415 Acid Resistant 1/4" Elbow for 1/4" System, Pack of 2

    Online special order

    LOC-LINE 45415 Acid Resistant 1/4" Elbow - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $9.18

  • FALSE LOC-LINE 45401 Acid Resistant 1/4" Hose Segment for 1/4" System, Pack of 2

    LOC-LINE LOC-LINE 45401 Acid Resistant 1/4" Hose Segment for 1/4" System, Pack of 2

    Online special order

    LOC-LINE 45401 Acid Resistant 1/4" Hose Segment - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $9.91

  • FALSE LOC-LINE 45402 Acid Resistant 1/16" Round Nozzle for 1/4" System, Pack of 4

    LOC-LINE LOC-LINE 45402 Acid Resistant 1/16" Round Nozzle for 1/4" System, Pack of 4

    Online special order

    LOC-LINE 45402 Acid Resistant 1/16" Round Nozzle - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $6.62

  • FALSE LOC-LINE 45403 Acid Resistant 1/8" Round Nozzle for 1/4" System, Pack of 4

    LOC-LINE LOC-LINE 45403 Acid Resistant 1/8" Round Nozzle for 1/4" System, Pack of 4

    Online special order

    LOC-LINE 45403 Acid Resistant 1/8" Round Nozzle - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $6.62

  • FALSE LOC-LINE 45404 Acid Resistant 1/4" Round Nozzle for 1/4" System, Pack of 4

    LOC-LINE LOC-LINE 45404 Acid Resistant 1/4" Round Nozzle for 1/4" System, Pack of 4

    Online special order

    LOC-LINE 45404 Acid Resistant 1/4" Round Nozzle - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $6.62

  • Low stock! FALSE LOC-LINE 45405 Acid Resistant 1/8" NPT Connector for 1/4" System, Pack of 4

    LOC-LINE LOC-LINE 45405 Acid Resistant 1/8" NPT Connector for 1/4" System, Pack of 4

    2 in stock

    LOC-LINE 45405 Acid Resistant 1/8" NPT Connector - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    2 in stock

    $6.62

  • FALSE LOC-LINE 45406 Acid Resistant 1/4" NPT Connector for 1/4" System, Pack of 4

    LOC-LINE LOC-LINE 45406 Acid Resistant 1/4" NPT Connector for 1/4" System, Pack of 4

    Online special order

    LOC-LINE 45406 Acid Resistant 1/4" NPT Connector - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $6.62

  • Low stock! FALSE LOC-LINE 45407 Acid Resistant 1" Flare Nozzle for 1/4" System, Pack of 2

    LOC-LINE LOC-LINE 45407 Acid Resistant 1" Flare Nozzle for 1/4" System, Pack of 2

    2 in stock

    LOC-LINE 45407 Acid Resistant 1" Flare Nozzle - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    2 in stock

    $9.91

  • FALSE

    LOC-LINE LOC-LINE 45408 Acid Resistant 1/4" Y Fitting for 1/4" System, Pack of 2

    Online special order

    LOC-LINE 45408 Acid Resistant 1/4" Y Fitting - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $9.91

  • FALSE LOC-LINE 45409 Acid Resistant 1/4" Double Socket for 1/4" System, Pack of 4

    LOC-LINE LOC-LINE 45409 Acid Resistant 1/4" Double Socket for 1/4" System, Pack of 4

    Online special order

    LOC-LINE 45409 Acid Resistant 1/4" Double Socket - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $7.04

  • FALSE LOC-LINE 45411 Acid Resistant 1/4" Socket to 1/8 FNPT for 1/4" System, Pack of 4

    LOC-LINE LOC-LINE 45411 Acid Resistant 1/4" Socket to 1/8 FNPT for 1/4" System, Pack of 4

    Online special order

    LOC-LINE 45411 Acid Resistant 1/4" Socket to 1/8 FNPT - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $8.37

  • FALSE LOC-LINE 45416 Acid Resistant 1/4" T Fitting for 1/4" System, Pack of 2

    LOC-LINE LOC-LINE 45416 Acid Resistant 1/4" T Fitting for 1/4" System, Pack of 2

    Online special order

    LOC-LINE 45416 Acid Resistant 1/4" T Fitting - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $11.07

  • FALSE LOC-LINE 45481 Acid Resistant 1/4" Swivel Nozzle 40 for 1/4" System, Pack of 2

    LOC-LINE LOC-LINE 45481 Acid Resistant 1/4" Swivel Nozzle 40 for 1/4" System, Pack of 2

    Online special order

    LOC-LINE 45481 Acid Resistant 1/4" Swivel Nozzle 40 - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $14.19

  • FALSE

    LOC-LINE LOC-LINE 45482 Acid Resistant 1/4" Swivel Nozzle 60 for 1/4" System, Pack of 2

    Online special order

    LOC-LINE 45482 Acid Resistant 1/4" Swivel Nozzle 60 - Pack of 2 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $14.19

  • FALSE

    LOC-LINE LOC-LINE 46422 Acid Resistant 1/16" Round Nozzle for 1/4" System, Pack of 50

    Online special order

    LOC-LINE 46422 Acid Resistant 1/16" Round Nozzle - Pack of 50 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $65.08

  • FALSE

    LOC-LINE LOC-LINE 46423 Acid Resistant 1/8" Round Nozzle for 1/4" System, Pack of 50

    Online special order

    LOC-LINE 46423 Acid Resistant 1/8" Round Nozzle - Pack of 50 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $65.08

  • FALSE LOC-LINE 46424 Acid Resistant 1/4" Round Nozzle for 1/4" System, Pack of 50

    LOC-LINE LOC-LINE 46424 Acid Resistant 1/4" Round Nozzle for 1/4" System, Pack of 50

    Online special order

    LOC-LINE 46424 Acid Resistant 1/4" Round Nozzle - Pack of 50 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $65.08

  • FALSE LOC-LINE 46425 Acid Resistant 1/8 NPT Connector for 1/4" System, Pack of 50

    LOC-LINE LOC-LINE 46425 Acid Resistant 1/8 NPT Connector for 1/4" System, Pack of 50

    Online special order

    LOC-LINE 46425 Acid Resistant 1/8 NPT Connector - Pack of 50 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $65.08

  • FALSE LOC-LINE 46426 Acid Resistant 1/4" NPT Connector for 1/4" System, Pack of 50

    LOC-LINE LOC-LINE 46426 Acid Resistant 1/4" NPT Connector for 1/4" System, Pack of 50

    Online special order

    LOC-LINE 46426 Acid Resistant 1/4" NPT Connector - Pack of 50 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $65.08

  • FALSE LOC-LINE 46427 Acid Resistant 1" Flare Nozzle for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 46427 Acid Resistant 1" Flare Nozzle for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 46427 Acid Resistant 1" Flare Nozzle - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $70.54

  • FALSE

    LOC-LINE LOC-LINE 46428 Acid Resistant 1/4" Y Fitting for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 46428 Acid Resistant 1/4" Y Fitting - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $70.54

  • FALSE LOC-LINE 46429 Acid Resistant 1/4" Double Socket for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 46429 Acid Resistant 1/4" Double Socket for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 46429 Acid Resistant 1/4" Double Socket - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $27.68

  • Low stock! FALSE LOC-LINE 46431 Acid Resistant 1/4" Socket to 1/8" FNPT for 1/4" System, Pack of 20

    LOC-LINE LOC-LINE 46431 Acid Resistant 1/4" Socket to 1/8" FNPT for 1/4" System, Pack of 20

    1 in stock

    LOC-LINE 46431 Acid Resistant 1/4" Socket to 1/8" FNPT - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    1 in stock

    $33.15

  • FALSE

    LOC-LINE LOC-LINE 46435 Acid Resistant 1/4" Elbow for 1/4" System, Pack of 20

    Online special order

    LOC-LINE 46435 Acid Resistant 1/4" Elbow - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

    Online special order

    $71.68

Login

Forgot your password?

Don't have an account yet?
Create account