3/4" Nozzles

LOC-LINE 57866 Acid Resistant 1/4" Round Nozzles for 1/2" - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 56806 Acid Resistant 1/4" Round Nozzle for 1/2" - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 51806 1/4" Round Nozzle, 1/2" System - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 49487 ProStream Nozzles .160x1.25 - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 49486 ProStream Nozzles .117x1.25 - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 49484 ProStream Nozzles .062x1.25 - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 49485 ProStream Nozzles .086x1.25 - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 49483 ProStream Nozzles .160x.500 - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 49482 ProStream Nozzles .117x.500 - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 49481 ProStream Nozzles .086x.500 - Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 49424 1/4" Round Nozzle, 1/4" System - Pack of 50 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 46427 Acid Resistant 1" Flare Nozzle - Pack of 20 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

Read more less

LOC-LINE 45403 Acid Resistant 1/8" Round Nozzle - Pack of 4 Material Properties: Polyester Colors: Yellow Chemical Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, Grease, Hydrocarbons, Oils, Salt No: Acids over 150F, Chlorine, Acetone, Chlorinated Hydrocarbon, Bases Strong, Ethyl Acetate, Water Hotter than 150F Melting Point: 475F Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4″ System: 50 psi – 250 gph or (110 psi – 500 gph W/ Element Clamps) 1/2″ System: 30 psi – 475 gph or (60 psi – 950 gph W/ Element Clamps) 3/4 System: 20 psi 1,140 gph or (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it’s products.

Read more less

LOC-LINE 41461 1/8" 45Deg Round Nozzle - Pack of 4 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 72088 HPT (XR Style) Noz = .117X0 Thread = 1/4″ Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 72089 HPT (XR Style) W/Adj Lever Noz = .117X.25 Thread = 1/4″ Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 72090 HPT (XR Style) W/Adj Lever Noz = .117X.5 Thread = 1/4″ Pack of 2 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 79072-BLK Black HPT (CT Style) Noz = .160X0 Thread = 1/4" Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 79072-G Gray HPT (CT Style) Noz = .160X0 Thread = 1/4" Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 79073-G Gray HPT (CT Style) W/Adj Lever Noz = .160X.25 Thread = 1/4" Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 79073-BLK Black HPT (CT Style) W/Adj Lever Noz = .160X.25 Thread = 1/4" Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 79074-G HPT (CT Style) W/Adj Lever Noz = .160X.5 Thread = 1/4" Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 79075-BLK HPT (CT Style) W/Adj Lever Noz = .160X1.25 Thread = 1/4" Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less

LOC-LINE 79075-G HPT (CT Style) W/Adj Lever Noz = .160X1.25 Thread = 1/4" Pack of 10 Material Properties: Acetal Chemical Compatibility: Yes:  Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No:  Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite Melting Point:  329F Maximum Operating Temperature:  170F (Repeated exposure to this temperature will cause fatigue) Recommended Maximum Line Pressure & Flow Rates: 1/4" System:  50 psi - 250 gph or (110 psi - 500 gph W/ Element Clamps) 1/2" System:  30 psi - 475 gph or (60 psi - 950 gph W/ Element Clamps) 3/4 System:  20 psi 1,140 gph  or  (40 PSI 2,280 gph W/ Element Clamps) Acetal Copolymer in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. This material meets NSF International Standards 14, 51 and 61 for contact with potable water Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it's products.

Read more less