Products

E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion. Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16. Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. Features Easy press-in installation Design minimizes splintering and splitting Available in 3 lengths for varying material thicknesses Applications: Soft woods: such as pine, composition board, and MDF Most Plastics Specifications E-Z Lok P/N: 170-006-BR For Use in: Soft Wood, Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Finsert Material: Brass System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.19 Drill Size: #5 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion. Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16. Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. Features Easy press-in installation Design minimizes splintering and splitting Available in 3 lengths for varying material thicknesses Applications: Soft woods: such as pine, composition board, and MDF Most Plastics Specifications E-Z Lok P/N: 170-008-BR For Use in: Soft Wood, Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Finsert Material: Brass System of Measurement: Inch Internal Thread: 8-32 External Thread: N/A Installed Length: 0.19 Drill Size: 15/64 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion. Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16. Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. Features Easy press-in installation Design minimizes splintering and splitting Available in 3 lengths for varying material thicknesses Applications: Soft woods: such as pine, composition board, and MDF Most Plastics Specifications E-Z Lok P/N: 170-332-BR For Use in: Soft Wood, Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Finsert Material: Brass System of Measurement: Inch Internal Thread: 10-32 External Thread: N/A Installed Length: 0.19 Drill Size: G Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20315 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 5-40 External Thread: N/A Installed Length: 0.19 Drill Size: #29 Tap Size: 5-40 STI Minimum Full Thread Depth: 0.23 Installation Tool P/N: M1004

Read more less

E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20610 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 10-24 External Thread: N/A Installed Length: 0.19 Drill Size: 13/64 Tap Size: 10-24 STI Minimum Full Thread Depth: 0.36 Installation Tool P/N: M1007

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-004-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.19 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-004-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.19 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-004-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.19 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-004-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.19 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-004-RS For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.19 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc. Specifications: E-Z Lok P/N: 30610 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 10-32 External Thread: N/A Installed Length: 0.19 Drill Size: 13/64 Tap Size: 10-32 STI Minimum Full Thread Depth: 0.32 Installation Tool P/N: M1008

Read more less

E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application. Features Tapered and straight designs Install ultrasonically or with heat driver Superior torque and pull-out resistance Inch or metric threads Tapered design in single and double vane Straight design in flush or flanged configuration Applications: Post-molding installation in thermoplastic materials Installation: Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples. Specifications E-Z Lok P/N: DV-002-TH For Use in: Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Ultrasonic Material: Brass System of Measurement: Inch Internal Thread: 2-56 External Thread: N/A Installed Length: 0.19 Drill Size: See Dimensional Dwg Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less