Products
E-Z LOK E-Z LOK™ - 240-000-BR Pack of 25 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 0-80
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-000-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 0-80 External Thread: N/A Installed Length: 0.13 Drill Size: 3/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$9.91
E-Z LOK E-Z LOK™ - 240-002-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 2-56
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-002-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 2-56 External Thread: N/A Installed Length: 0.16 Drill Size: 1/8 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$9.18
E-Z LOK E-Z LOK™ - 240-002-CR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 2-56
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-002-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 2-56 External Thread: N/A Installed Length: 0.16 Drill Size: 1/8 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$8.49
E-Z LOK E-Z LOK™ - 240-004-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 4-40
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-004-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.19 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$9.44
E-Z LOK E-Z LOK™ - 240-004-CR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 4-40
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-004-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.19 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$10.08
E-Z LOK E-Z LOK™ - 240-006-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 6-32
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-006-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.25 Drill Size: 3/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$9.84
E-Z LOK E-Z LOK™ - 240-006-CR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 6-32
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-006-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.25 Drill Size: 3/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$11.60
E-Z LOK E-Z LOK™ - 240-008-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 8-32
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-008-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 8-32 External Thread: N/A Installed Length: 0.31 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$11.04
E-Z LOK E-Z LOK™ - 240-008-BR.250 Pack of 100 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 8-32 - .250" long
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-008-BR.250 For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 8-32 External Thread: N/A Installed Length: 0.25 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$20.48
E-Z LOK E-Z LOK™ - 240-008-CR Pack of 5 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 8-32
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-008-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 8-32 External Thread: N/A Installed Length: 0.31 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$9.14
E-Z LOK E-Z LOK™ - 240-3-AL Pack of 25 - E-Z Press™ Threaded Insert - Flush - Aluminum - 10-24
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-3-AL For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Aluminum System of Measurement: Inch Internal Thread: 10-24 External Thread: N/A Installed Length: 0.38 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$9.78
E-Z LOK E-Z LOK™ - 240-3-BR Pack of 25 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 10-24
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-3-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 10-24 External Thread: N/A Installed Length: 0.38 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$6.98
E-Z LOK E-Z LOK™ - 240-3-CR Pack of 5 - E-Z Press™ Threaded Insert - Flush - Stainless - 10-24
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-3-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 10-24 External Thread: N/A Installed Length: 0.375 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$9.62
E-Z LOK E-Z LOK™ - 240-332-BR Pack of 25 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 10-32
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-332-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 10-32 External Thread: N/A Installed Length: 0.38 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$6.98
E-Z LOK E-Z LOK™ - 240-332-BR.250 Pack of 25 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 10-32 - .250" long
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-332-BR.250 For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 10-32 External Thread: N/A Installed Length: 0.25 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$5.99
E-Z LOK E-Z LOK™ - 240-332-CR Pack of 5 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 10-32
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-332-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 10-32 External Thread: N/A Installed Length: 0.38 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$12.01
E-Z LOK E-Z LOK™ - 240-4-BR Pack of 25 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 1/4-20
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-4-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 1/4-20 External Thread: N/A Installed Length: 0.5 Drill Size: 5/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$8.65
E-Z LOK E-Z LOK™ - 240-4-CR Pack of 5 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 1/4-20
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-4-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 1/4-20 External Thread: N/A Installed Length: 0.5 Drill Size: 5/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$15.37
E-Z LOK E-Z LOK™ - 240-5-AL Pack of 10 - E-Z Press™ Threaded Insert - Flush - Aluminum - 5/16-18
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-5-AL For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Aluminum System of Measurement: Inch Internal Thread: 5/16-18 External Thread: N/A Installed Length: 0.563 Drill Size: 3/8 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$6.14
E-Z LOK E-Z LOK™ - 240-5-BR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 5/16-18
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-5-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 5/16-18 External Thread: N/A Installed Length: 0.56 Drill Size: 3/8 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$4.58
E-Z LOK E-Z LOK™ - 240-5-CR Pack of 5 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 5/16-18
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-5-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 5/16-18 External Thread: N/A Installed Length: 0.56 Drill Size: 3/8 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$17.33
E-Z LOK E-Z LOK™ - 240-6-AL Pack of 10 - E-Z Press™ Threaded Insert - Flush - Aluminum - 3/8-16
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-6-AL For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Aluminum System of Measurement: Inch Internal Thread: 3/8-16 External Thread: N/A Installed Length: 0.625 Drill Size: 7/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$7.85
E-Z LOK E-Z LOK™ - 240-6-BR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 3/8-16
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-6-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 3/8-16 External Thread: N/A Installed Length: 0.63 Drill Size: 7/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$7.82
E-Z LOK E-Z LOK™ - 240-6-CR Pack of 5 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 3/8-16
E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-6-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 3/8-16 External Thread: N/A Installed Length: 0.63 Drill Size: 7/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$20.03