Products

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M3-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M3-0.5 External Thread: N/A Installed Length: 5 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M3-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M3-0.5 External Thread: N/A Installed Length: 5 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M3-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M3-0.5 External Thread: N/A Installed Length: 0.188 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M3.5-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M3.5-0.6 External Thread: N/A Installed Length: 6 Drill Size: 3/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M4-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 8 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M4-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 0.313 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M5-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M5-0.8 External Thread: N/A Installed Length: 10 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M5-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M5-0.8 External Thread: N/A Installed Length: 0.375 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M6-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M6-1.0 External Thread: N/A Installed Length: 13 Drill Size: 5/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M6-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M6-1.0 External Thread: N/A Installed Length: 0.5 Drill Size: 5/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-M8-AL For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Aluminum System of Measurement: Metric Internal Thread: M8-1.25 External Thread: N/A Installed Length: N/A Drill Size: N/A Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M10-AL For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Aluminum System of Measurement: Metric Internal Thread: M10-1.5 External Thread: N/A Installed Length: N/A Drill Size: N/A Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M3-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M3-0.5 External Thread: N/A Installed Length: 5 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M3-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M3-0.5 External Thread: N/A Installed Length: 0.188 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M4-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 8 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M4-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M4-0.7 External Thread: N/A Installed Length: 0.313 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M5-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M5-0.8 External Thread: N/A Installed Length: 10 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M5-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M5-0.8 External Thread: N/A Installed Length: 0.375 Drill Size: 1/4 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M6-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M6-1.0 External Thread: N/A Installed Length: 13 Drill Size: 5/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M6-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Metric Internal Thread: M6-1.0 External Thread: N/A Installed Length: 0.5 Drill Size: 5/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M8-AL For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Aluminum System of Measurement: Metric Internal Thread: M8-1.25 External Thread: N/A Installed Length: 0.563 Drill Size: N/A Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 260-M8-BR For Use in: Thermoset Plastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Metric Internal Thread: M8-1.25 External Thread: N/A Installed Length: 14 Drill Size: 3/8 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

Read more less

E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 313-M10 For Use in: Metal Specific Material Use: N/A Sub-Category: Thin Wall Style: Solid Wall Material: Steel - Stainless System of Measurement: Metric Internal Thread: M10-1.5 External Thread: N/A Installed Length: 0.5 Drill Size: 29/64 Tap Size: 1/2-20 Minimum Full Thread Depth: 0.56 Installation Tool P/N: 500-4

Read more less

E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts Specifications: E-Z Lok P/N: 313-M12 For Use in: Metal Specific Material Use: N/A Sub-Category: Thin Wall Style: Solid Wall Material: Steel - Stainless System of Measurement: Metric Internal Thread: M12-1.75 External Thread: N/A Installed Length: 0.63 Drill Size: 37/64 Tap Size: 5/8-18 Minimum Full Thread Depth: 0.68 Installation Tool P/N: 500-6

Read more less