CNC Tool Tower for 40 taper tool holders
Individual units are 3′ tall
3 shelves – 24 toolholders per shelf
Nylon inserts protect each tool holder
Sturdy 16 gauge steel construction
Tool Tower should be bolted to the floor for additional security
Casters should never be used on a stacked CNC Tower as this could be extremely dangerous
Huot ToolScoot – CNC ToolCart for HSK63A tooling
Holds 48 HSK 63A tool holders
In addition to HSK63A, accommodates HSK80B & HSK80D toolholders
2 storage trays with protective lining inside
Durable nylon inserts to help prevent tool damage
New extra tray supports for better stability
Interlocking side panel construction adds strength
Heavy duty 5″ x 1-1/4″ casters load rated at 1000 lbs.
Keep tools cleaner than open end carts
Angled tray for easy, quick tool access from either side
Two position adjustable tray holder
Solid side panels for maximum strength & stability
Heavy gauge, all steel infra red/baked epoxy finish
1/16″ to 1/2″ x 64ths jobbers drills• Holds full packages of each size (12 pc. Min.)• Stackable for larger inventories• One piece drawer slide for long useful life• Decimal equivalentsAdditional: Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in Review: There are no reviews yet.
5 Adjustable shelves for 50 taper. Each shelf holds 10 toolholders (50 total) Every toolholder is lined with custom nylon grommets designed for maximum protection of your valuable tools.
Holds BT, CAT “V” flange, NMTB 50 taper toolholders
Shelves can be set flat or at a 20 degree angle
1 Utility shelf to hold your collet racks, tools, Butcher-Block for mounting your vise. (Collet racks, butcher-block sold separate)
70 Matching slot locations (35 per side)for maximum shelf adjustment. Every 5th slot marked for easy alignment.
Adjustable height handle.
3 built-in top slots for securing spanner wrenches.
Rugged unibody arched design and made from 14-gauge CRS.
Heavy duty 5″ casters rated up to 1200 pounds.
Additional sizes available.
For jobbers length fractional drills 1/16" to 1/2" x 64thsDecimal equivalents and US tap informationEach storage hole precisely sized for accurate, quick drill selectionFits in 2" deep tool drawerCorrosion resistant, epoxy baked on coatingSecure, snap-lock steel coverRugged, heavy gauge all–steel caseNSN: 5140-00-277-8835REF:NSN 00-250-2529 002502529 5140-00-250-2529Additional: Weight 2 lbsDimensions 4 × 7 × 1.75 in
For 3J Collets
Holds (24) 3J collets
Angled for visibility and easier selection of stored tools
Polycarbonate sheet, 3/8″ thick, secured to metal shelf.
Mountable on bench top
Heavy gauge steel
Tough, epoxy powder coat finish for long lasting protection
Huot Vertical Toolholder Rack for BT, CAT, NMTB 40 Taper
Finding space in a machine cell to store toolholders just became easier with Huot’s new vertical rack. Don’t have any practical room for one of our horizontal racks? This rack allows you to use vertical space with the same capacity. Available in most popular tapers.
Solid, cold roll steel construction
Scratch resistant powder paint
Multiple attachment points allows mounting to machine, wall, anywhere
Molded inserts securely hold tools
Angled bottom positions, flat top
Holds up to 6 toolholders in BT, CAT, NMTB 40 Taper
CNC tool holder
V-Flange tool and ER collet rack puts all the tools you need for the job right where you want them. The table top design makes for easy storage and organization with minimal space requirements.
Features of the EDP #14728 toolholder collet rack include:
40 taper NC rack has spaces for 12 toolholders
Spaces for 12 ER 32 collets
Spaces for 12 ER 16 collets
Angled for easier selection of stored tools
Heavy gauge steel with tough, solvent free, powder coat finish
Dimensions are 12½”W x 16½”D x 7”H
Mounts on bench top or fits neatly inside standard 36″ industrial cabinet.
Made in the USA!
CNC tool holder
V-Flange tool and ER collet rack puts all the tools you need for the job right where you want them. The table top design makes for easy storage and organization with minimal space requirements.
Features of Huot EDP #14727 toolholder collet rack include:
30 taper NC rack has spaces for 12 toolholders
Spaces for 12 ER 32 collets
Spaces for 12 ER 16 collets
Angled for easier selection of stored tools
Heavy gauge steel with tough, solvent free, powder coat finish
Dimensions are 12½”W x 16½”D x 7”H
Mounts on bench top or fits neatly inside standard 36″ industrial cabinet.
Made in the USA!
UltraScoot CNC Tool Cart for HSK 100A
Bigger, Badder, Beefier are just a few of the ways to describe the UltraScoot. Constructed of 12 gauge cold rolled steel, this monster leaves our factory with the chassis fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot comes with 4 adjustable shelves. Additional shelves may be ordered separately.
• HSK 100A toolholders – Capacity 120
• Shelves have 11 possible mounting locations per side.
• Six casters, 4 swivel and 2 rigid load rated at a whopping 7,200 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
• Side shelf for mounting a toolholder vise or universal dispenser.
UltraScoot CNC Tool Cart for HSK 63A
Bigger, Badder, Beefier are just a few of the ways to describe the UltraScoot. Constructed of 12 gauge cold rolled steel, this monster leaves our factory with the chassis fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot comes with 4 adjustable shelves. Additional shelves may be ordered separately.
• HSK 63A toolholders – Capacity 176
• Shelves have 11 possible mounting locations per side.
• Six casters, 4 swivel and 2 rigid load rated at a whopping 7,200 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
• Side shelf for mounting a toolholder vise or universal dispenser.
UltraScoot CNC Tool Cart for 50 Taper
Bigger, Badder, Beefier are just a few of the ways to describe the UltraScoot. Constructed of 12 gauge cold rolled steel, this monster leaves our factory with the chassis fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot comes with 4 adjustable shelves. Additional shelves may beordered separately.
• BT, CAT “V” flange, NMTB 50 taper toolholders – Capacity 120
• Shelves have 11 possible mounting locations per side.
• Six casters, 4 swivel and 2 rigid load rated at a whopping 7,200 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
• Side shelf for mounting a toolholder vise or universal dispenser.
Huot UltraScoot 40 Taper CNC Tool Cart
Bigger, Badder, Beefier are just a few of the ways to describe the Ultra Scoot by Huot . Constructed of 12 gauge cold rolled steel, this monster leaves our factory with the chassis fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot comes with 4 adjustable shelves. Additional shelves may be ordered separately.
• BT, CAT “V” flange, NMTB 40 taper toolholders – Capacity 176
• Shelves have 11 possible mounting locations per side.
• Six casters, 4 swivel and 2 rigid load rated at a whopping 7,200 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
• Side shelf for mounting a toolholder vise or Universal Dispenser.
UltraScoot II CNC Tool Cart for HSK100A
Built identical to the UltraScoot (just not as wide), the UltraScoot II is constructed of 12 gauge cold rolled steel. The chassis fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot II comes with 2 shelves. Additional shelves may be ordered separately.
• HSK 100A Toolholders – Capacity 60
• Casters, 2 swivel and 2 rigid load rated at a whopping 4,800 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
UltraScoot II Tool Cart for HSK 63A
Built identical to the UltraScoot (just not as wide), the UltraScoot II is constructed of 12 gauge cold rolled steel. The chassis is fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot II comes with 2 shelves. Additional shelves may be ordered separately.
• HSK63A Toolholders – Capacity 88
• In addition to HSK63A, accommodates HSK80B & HSK80D toolholders
• Casters, 2 swivel and 2 rigid load rated at a whopping 4,800 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
UltraScoot II CNC Tool Cart 60 Taper
Built identical to the UltraScoot (just not as wide), the UltraScoot II is constructed of 12 gauge cold rolled steel. The chassis is fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot II comes with 2 shelves. Additional shelves may be ordered separately.
• 60 taper Toolholders – Capacity 32
• Casters, 2 swivel and 2 rigid load rated at a whopping 4,800 pounds.
• Strong tubular handle makes it easy to push or pull.
Polycarbonate attached to shelves to help protect tooling. Shelves finished in durable gold vein powder finish. Chassis is textured black.
UltraScoot II CNC Tool Cart for 50 Taper
Built identical to the UltraScoot (just not as wide), the UltraScoot II is constructed of 12 gauge cold rolled steel. The chassis fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot II comes with 2 shelves. Additional shelves may be ordered separately.
• 50 Taper Toolholders – Capacity 60
• Casters, 2 swivel and 2 rigid load rated at a whopping 4,800 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
UltraScoot II CNC Tool Cart for 40 Taper
Built identical to the UltraScoot (just not as wide), the UltraScoot II is constructed of 12 gauge cold rolled steel. The chassis fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot II comes with 2 shelves. Additional shelves may be ordered separately.
• 40 Taper Toolholders – Capacity 88
• Casters, 2 swivel and 2 rigid load rated at a whopping 4,800 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
UltraScoot II CNC Tool Cart for HSK 125 A
Built identical to the UltraScoot (just not as wide), the UltraScoot II is constructed of 12 gauge cold rolled steel. The chassis is fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot II comes with 2 shelves. Additional shelves may be ordered separately.
• HSK125A Toolholders – Capacity 48
• Casters, 2 swivel and 2 rigid load rated at a whopping 4,800 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
UltraScoot CNC Tool Cart for HSK 125A
Bigger, Badder, Beefier are just a few of the ways to describe the Ultra Scoot by Huot Manufacturing. Constructed of 12 gauge cold rolled steel, this monster leaves our factory with the chassis fully MIG welded so all you have to do is bolt on the casters and you’re in business.
• UltraScoot comes with 4 adjustable shelves. Additional shelves may beordered separately.
• HSK 125A toolholders – Capacity 96
• Shelves have 11 possible mounting locations per side.
• Six casters, 4 swivel and 2 rigid load rated at a whopping 7,200 pounds.
• Strong tubular handle makes it easy to push or pull.
• Durable gold vein shelves with textured black chassis.
• Side shelf pre-punched for mounting a toolholder vise or universal dispenser.
• Customizable for live tooling heads. Contact the factory for details.
• 12 gauge cold roll steel construction• 5/16″ hardware provided for assembly• Shelf tub depth is 4″ on 3 sides with front notched to 2-5/8″• Open design, stored products are easily visible• Top shelf offers easy crane access• Adjustable shelf heights. 12 possible locations.• Shelves mount at a -13° angle• Compact design fits in machining cell• Universal design accommodates multiple types of tooling• Ideal for hard/soft jaws, vises, fixtures, lathe chucks, tooling heads
• Designed for machine shops• Solid steel frame and shelves, no sagging wood or mesh bottoms• Ergonomic height allows for easy lifting of components• Just what you need to achieve your 5S and/or Lean 6 Sigma initiatives• Tabs on legs allow for bolting to shop floor for additional stability & safety• Overall dimensions are 39.25″ Wide X 20″ Deep X 59.5″ Tall• Precision engineering makes for fast assembly• Proudly made in the USA
Tooling shown for illustration purpose only
Replacement top shelf for either Huot ToolScoot or ToolTower
With 24 molded inserts for HSK63A
Please note: This is only a replacement top shelf, and it will only work with Huot ToolScoot or Huot ToolTower product lines.
Replacement middle shelf for Huot ToolScoot
With 50 molded inserts for 5C Collets
Please note: This is only a replacement middle shelf, and it will only work with the Huot ToolScoot product line.