ER/DR/RD 25 series collet rack
Holds up to 48 collets, hole size 61/64″
Protects, stores and organizes your valuable collets
Mountable on bench top
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
ER/DR/RD 20 series collet rack
Holds up to 36 collets, hole size 49/64″ or C-4 Sandvik Collets
Protects, stores and organizes your valuable collets
Mountable on bench top
Fit within 2” to 4” drawer
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
ER/DR/RD 16 series collet rack
Holds up to 49 collets, hole size 39/64″ or C-3 Sandvik collet
Protects, stores and organizes your valuable collets
Mountable on bench top
Fit within 2” to 4” drawer
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
ER/DR/RD 11 series collet rack
Holds up to 49 collets, hole size 27/64″
Protects, stores and organizes your valuable collets
Mountable on bench top
Fit within 2” to 4” drawer
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
5C collet rack-holds up to 30 pieces of 5C collets
Angled for visibility and easier selection of stored tools
Mountable on bench top
Heavy gauge steel
Tough, epoxy finish for long lasting protection
Super storage cabinet, 15 drawers
15 drawers 2″ high
Each drawer measures 29″ W x 18″ D x 2″ H
480 adjustable dividers included with SuperCab. Dividers have angled tops creating a perfect location for bar code or inventory tags
Solid welded drawer dividers front to back provide a rigid smooth surface with no holes to lose parts
Heavy Duty ball-bearing drawer slides provide full-extension of the drawers
Label holders provide identification of the drawers at a glance
Steel skid keeps unit off floor and allows for stacking for even greater space savings (Not recommended to stack over two units high)
18 gauge , all steel construction with powder coat paint finish.
Rugged, exclusive I-beam double wall construction
Heavy duty ace cam lock with 2 keys
Drawer divider kit for Master Series Cabinets
Four sections create 25 compartments in Huot Master Series Cabinet standard 11″ x 23-1/8″ dispenser drawers
Individual compartments are each 11″ deep x 15/16″ wide x 1″ high.
Vinyl compartments separate tools to prevent damage and organize inventory.
Can be labeled for inventory control and tracking.
Use in combination with protective vinyl webbing to multiply drawer capacity
50′ 7″ to 9″ protective polyethylene webbing
Woven of tough, flexible and stretchable polyethylene
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
50′ 1.5″ to 2″ protective polyethylene webbing
Woven of tough, flexible and stretchable polyethylene netting
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
Vinyl webbing 50′ 1″ to 1-1/2″
Woven of tough, flexible and stretchable polyethylene netting
Sleeve mesh netting
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
Vinyl webbing 100′ 1/2″ to 1
Woven of tough, flexible and stretchable polyethylene
Sleeve mesh netting
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
Vinyl webbing 100′ 1/4″ to 1/2
Woven of tough, flexible and stretchable polyethylene netting
Sleeve mesh netting
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
Vinyl webbing 50’of 1/4″ to 1/2″ & 50′ of 1/2″ to 1
Woven of tough, flexible and stretchable polyethylene netting
Sleeve mesh netting
Great protection for delicate edges of cutting tools
Doubles/triples storage capacity of any drawer
Reusable. Slips on and off easily
Elasticity assures snug fit and non-slip grip
Easily cut to any length
Inexpensive protection
#30 taper NC tool holder
12 spaces for toolholders, 7 spaces for Tap Drivers or DA-180 Series Collets, 8 spaces for DA-180 Series, 10 spaces for DA-200 Series, 9 spaces for DA-300 Series
Holds NC toolholders, collets and tap adapters
Angled for easier selection of stored tools
Mounts on bench top or fits neatly inside standard 36″ industrial cabinet.
Holds National Fine sizes:
6-40 tap #33 drill, 8-36 #29, 10-32 #21, 12-28 #15, 1/4″-28 #3, 5/16″-24 #I, 3/8″-24 #Q, 7/16″-20 #25/64, 1/2-20 #29/64
National Coarse Holds sizes:
6-32 tap #36 drill, 8-32 #29, 10-24 #25, 12-24 #16, 1/4″-20 #7, 5/16″-18 #F, 3/8″-16 #5/16″, 7/16″-14 #U, 1/2″-13 #27/64
Conveniently combines taps with the corresponding tap drill alongside of one another
Each storage hole precisely sized for accurate, quick tool selection
Raised embossed lettering for permanent identification
Corrosion resistant, epoxy baked on coating
Secure, snap-lock steel cover
Rugged, heavy gauge all–steel case
Clips mounted in the cover provide a handy place for securing your T-handle or adjustable tap wrench.
# 40 taper CNC tool holder
40 Taper NC rack has 12 spaces for toolholders, 7 spaces for Tap Drivers or DA-180 Series Collets, 8 spaces for DA-180 Series, 10 spaces for DA-200 Series, 9 spaces for DA-300 Series.
Holds NC toolholders, collets and tap adapters
Angled for easier selection of stored tools
Mounts on bench top or fits neatly inside standard 36″ industrial cabinet
Heavy gauge steel with epoxy powder finish
45 taper CNC tool holder
9 spaces for tool holders, 7 spaces for Tap Drivers or DA-180 Series Collets, 8 spaces for DA-180 Series, 10 spaces for DA-200 Series, 9 spaces for DA-300 Series
Holds NC toolholders, collets and tap adapters
Angled for easier selection of stored tools
Mounts on bench top or fits neatly inside standard 36″ industrial cabinet
Heavy gauge steel with epoxy powder finish
50 taper direct mount rack
Mounts directly on the CNC machine or on a wall in any convenient location
Nylon inserts help protect tooling
Holds 5 tools
Heavy gauge steel
Tough, epoxy finish for long lasting protection
HSK tote tray for 63 A tooling
*Holds 6 tools
Built-in end handles for comfortable carrying
Bench mount, hand carry, or mount on top
Made of heavy gauge steel
Nylon inserts help protect tooling *Painted texture black powder coating
S&D Drills 1″ to 1-1/2″ assorted
Holds 2 each
Reduced shank S/D bits
From 1″, 1-1/32, 1-1/16, 1-1/8, 1-5/32, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2
Label holders on drawer fronts permit easy, quick identification and inventory check
One piece drawer slide
Stackable with other cutting tool storage cabinets to save space
Finished with tough epoxy powder coating
S&D Drills 33/64″ to 63/64″ by 1/64ths
Holds 2 each
Reduced shank S/D bits
From 33/64ths to 63/64ths by 64ths
Label holders on drawer fronts permit easy, quick identification and inventory check
One piece drawer slide
Stackable with other cutting tool storage cabinets to save space
Finished with tough epoxy powder coating
For COROMANT CAPTO C5 Tooling
Individual units are 3′ tall
Comes with 3 shelves
Capacity of 24 CAPTO C5 tools per shelf, 72 total
For COROMANT CAPTO Tooling; C5
Sturdy 16 gauge steel construction, durable epoxy finish
Tool Tower should be bolted to the floor for additional security
Casters should never be used on a stacked CNC Tower as this could be extremely dangerous
For COROMANT CAPTO C4 Tooling
Individual units are 3′ tall
For COROMANT CAPTO® Tooling; C4
Comes with 3 shelves
Capacity of 24 CAPTO C4 tools per shelf, 72 total
Sturdy 16 gauge steel construction, durable epoxy finish
Tool Tower should be bolted to the floor for additional security
Casters should never be used on a stacked CNC Tower as this could be extremely dangerous
