Fractional drills 1/16″ to 1/2″ by 64ths
Out-of-the way convenience
Security – Built-in cam lock and two keys
Heavy-duty ball bearing drawer slides
Time saving – cutting tools are stored away in their proper location making it fast and easy to find the right tool
Each space clearly marked for the proper tool
Decimal equivalent shown under each size too
Overall Dimensions: 24.192″ W x 12.453″ D x 4.500″ H
Drawer Dimensions: 23.125″ W x 11.000″ D x 3.000″ H
A to Z reamers, 3 drawer dispenser
A to Z Reamers
Decimal equivalents also listed
Ideal where compact space is a must
4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes
One piece drawer slide
Finished with tough epoxy powder coating
CNC cart for #4 Morse taper and R8 collets
Holds 96, R8 or #4 Morse taper
2 storage trays with protective lining inside
Durable nylon inserts to help prevent tool damage
New extra tray supports for better stability
Interlocking side panel construction adds strength
Heavy duty 5″ x 1-1/4″ casters load rated at 1000 lbs.
Keep tools cleaner than open end carts
Angled tray for easy, quick tool access from either side
Two position adjustable tray holder
Solid side panels for maximum strength & stability
Heavy gauge, all steel infra red/baked epoxy finish
Wall mounting with doors for up to 3 Original dispenser cabinets.
Secure your inventory using wall mounted cabinet.
Heavy 18 gauge prime steel powder coated in our exclusive Huot battleship gray powder.
Holds up to 3 Original dispenser cabinets
Locks using your own padlock
Shipped KD and supplied with carriage bolts and nuts for easy assembly
Provide protected storage for your valuable cutting tool inventory
Wall mounted on 16″ centers using your own mounting hardware
Dispensers sold separately
DA200 Collet Rack
Holds up to 49 collets, hole size 15/32″
Protects, stores and organizes your valuable collets
Mountable on bench top
Fit within 2” to 4” drawer
All racks conveniently fit in the ToolScoot and Tool Tower storage trays
Heavy 14 gauge steel
Finished with durable epoxy, powder paint for long lasting protection
1/16″ to 1/2″ reamers, 4 drawer dispenser
Fractional Reamers 1/16″ to 1/2″ by 64ths
Decimal equivalents also listed
Ideal where compact space is a must
4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes
One piece drawer slide
Finished with tough epoxy powder coating
Space saving combination dispenser
The dispenser for metric taps, drills and dies. From 2.5 x .45 tap to 12.0 x 1.75 tap
Top drawer holds:
2.5 x .45 tap – 2.05 drill, dies
3.0 x .50 tap – 2.50 drill; dies
3.5 x .60 tap – 2.90 drill, dies
4.0 x .70 tap – 3.30 drill, dies
Room in top drawer for your T-handle wrench.
Middle drawer holds:
5.0 x .80 tap – 4.20 drill, dies
6.0 x 1.0 tap – 5.0 drill, dies
8.0 x 1.25 tap – 6.70 drill, dies
Bottom drawer holds:
10.0 x 1.50 tap – 8.50 drill, dies
12.0 x 1.75 tap – 10.20 drill, dies
Label holders on drawer fronts permit easy, quick identification and inventory check
One piece drawer slide
Stackable with other cutting tool storage cabinets to save space
Finished with tough epoxy powder coating
CNC Tool Cart Transport “ToolScoot” 30 taper
Holds 48 BT, CAT “V” flange, NMTB for 30 taper
2 storage trays with protective lining inside
Durable nylon inserts to help prevent tool damage
New extra tray supports for better stability
Interlocking side panel construction adds strength
Heavy duty 5″ x 1-1/4″ casters load rated at 1000 lbs.
Keep tools cleaner than open end carts
Angled tray for easy, quick tool access from either side
Two position adjustable tray holder
Solid side panels for maximum strength & stability
Heavy gauge, all steel infra red/baked epoxy finish
ToolScoot Holds 48 COROMANT CAPTO® Tools. C4
Specially molded nylon inserts provide secure and snug fit.
Holds 48 Tools
2 storage trays with protective lining inside
Durable nylon inserts to help prevent tool damage
New extra tray supports for better stability
Interlocking side panel construction adds strength
Heavy duty 5″ x 1-1/4″ casters load rated at 1000 lbs.
Keep tools cleaner than open end carts
Angled tray for easy, quick tool access from either side
Two position adjustable tray holder
Solid side panels for maximum strength & stability
Heavy gauge, all steel infra red/baked epoxy finish
Huot U-Size-It TriScoot CNC Tool Cart
Although we build carts for almost twenty different toolholder sizes ranging from the common BT, CAT and HSK sizes to the most obscure, we don’t cover them all. With that in mind and knowing someone out there still needs our help, we’ve devised a cart just for them.
This customizable product consists of a 3 shelf TriScoot with a 3/8″ thick polycarbonate sheet secured to each metal shelf. Each shelf can have up to 24 custom openings up to 2.188″ in diameter.
EDP 13915 available with 18 openings per sheet with a maximum diameter of 3.250″
All you need to do is provide us with the dimension at the top of the longest plane (shown as D1 on the diagram shown here) on your toolholder
Huot ToolScoot™ – CNC Tool Cart for HSK100A tooling
Holds 36 HSK 100A toolholders
2 storage trays with protective lining inside
Durable nylon inserts to help prevent tool damage
New extra tray supports for better stability
Interlocking side panel construction adds strength
Heavy duty 5″ x 1-1/4″ casters load rated at 1000 lbs.
Keep tools cleaner than open end carts
Angled tray for easy, quick tool access from either side
Two position adjustable tray holder
Solid side panels for maximum strength & stability
Heavy gauge, all steel infra red/baked epoxy finish
Huot TriScoot for HSK63F ToolholdersThe world famous Huot ToolScoot is now available with 3 shelves for even more storage in the same footprint. This cart is ruggedly built just like the original, but with a third more capacity and standing almost 7″ taller. EDP 13968 holds up to 72 HSK63F toolholders.Additonal: Weight 86 lbsDimensions 27.3125 × 18.50 × 41.75 in
CNC Tool Tower for 50 taper tool holdersIndividual units are 3′ tallThree Shelves – Each shelf holds 18 toolsNylon inserts protect each tool holderSturdy 16 gauge steel constructionTool Tower should be bolted to the floor for additional securityCasters should never be used on a stacked CNC Tower as this could be extremely dangerousAdditional info: Weight 65 lbsDimensions 27.3125 × 18.3175 × 36 in
CNC Tool Tower for 40 taper tool holdersIndividual units are 3′ tall3 shelves – 24 toolholders per shelfNylon inserts protect each tool holderSturdy 16 gauge steel constructionTool Tower should be bolted to the floor for additional securityCasters should never be used on a stacked CNC Tower as this could be extremely dangerousAdditional: Weight 65 lbsDimensions 27.3125 × 18.3175 × 36 in
CNC Tool Cart Transport “ToolScoot” 50 taperHolds 36 BT, CAT “V” flange, NMTB for 50 taper2 storage trays with protective lining insideDurable nylon inserts to help prevent tool damageNew extra tray supports for better stabilityInterlocking side panel construction adds strengthHeavy duty 5″ x 1-1/4″ casters load rated at 1000 lbs.Keep tools cleaner than open end cartsAngled tray for easy, quick tool access from either sideTwo position adjustable tray holderSolid side panels for maximum strength stabilityHeavy gauge, all steel infra red/baked epoxy finishCheck out our Toolscoot/Tooltower AccessoriesAdd: Weight 79 lbsDimensions 18 × 35.25 × 35 in
CNC Tool Cart Transport “ToolScoot” 40 taperHolds 48 BT, CAT “V” flange, NMTB for 40 taper2 storage trays with protective lining insideDurable nylon inserts to help prevent tool damageNew extra tray supports for better stabilityInterlocking side panel construction adds strengthHeavy duty 5″ x 1-1/4″ casters load rated at 1000 lbs.Keep tools cleaner than open end cartsAngled tray for easy, quick tool access from either sideTwo position adjustable tray holderSolid side panels for maximum strength stabilityHeavy gauge, all steel infra red/baked epoxy finishCheck out our Toolscoot/Tooltower AccessoriesAdditonal: Weight 79 lbsDimensions 18 × 35.25 × 35 in
Metric drills, .35 to 2.5 x .05, 2.6 to 10 x .1, assorted to 13mm138 compartments to store and inventory all your metric drill bitsHolds metric drills from .35mm to 13.00mmSizes include: .35mm to 2.50mm by .05mm, 2.6mm to 10.0mm by .1mm, 10.2mm, 10.5mm, 10.8mm, 11.0mm, 11.2mm, 11.5mm, 11.8mm, 12.0mm, 12.2mm, 12.5mm, and 13.0mmBall Bearing Slides Standard EquipmentAll steel cabinet with vinyl dividers to help protect and separate bits.Each cabinet is lockable with its own set of 2 keys.Each drawer measures 23-1/8″ wide; 11″ front to back.Stackable for larger inventories at one location.Lower drawer is undivided for extra long drills, reamers and miscellaneous tools or storage. *Drawer Divider Kit available for lower drawer (EDP14030)ADDITIONAL INFORMATION: Weight 50 lbsDimensions 26.000 × 12.500 × 9.3125 in
Drills, fractional, letter, wire, metric – all in one 6 drawer cabinetCabinet holds fractional drills 1/16″ to 1/2″ by 64ths1 to 60 wire gageA to Z letter sizesMetric from 0.35mm to 13.00mm including 0.35mm to 2.50mm x .05mm, 2.6mm to 10.0mm x .1mm, and 10.2, 10.5, 10.8, 11.0, 11.2, 11.5, 11.8, 12.0, 12.2, 12.5, 13.0mmWill hold a minimum of full packages of each sizeLockable dispenserEquipped with smooth ball bearing drawer slidesLockable, comes with set of two keysStackableADDITIONAL INFORMATION; Weight 80 lbsDimensions 26 × 12 × 15.8125 in
6 drawer cabinet holds 103 different sizes of silver deming drillsCabinet holds the following Silver Deming drills, 33/64ths to 1″ by 64ths,as well as 1-1/32″, 1-1/16″, 1-1/8″, 1-3/16″, 1-1/4″, 1-3/8″, 1-1/2″.Contains a total of 110 compartments103 identified for each size Silver Deming drillAdditional 7 compartments for specialized requirements.Lockable dispenser with 2 keysEquipped with smooth ball bearing drawer slidesADDITIONAL: Weight 80 lbsDimensions 26 × 12 × 15.8125 in
Category: Master Drill Dispensers U.S. SizesHolds full packages (minimum of 12 pcs.) of jobber or screwmachine length drills, fractional, letter and wire gauge sizes in onecomplete cabinet.• Top drawer holds fractional drills 1⁄16” to 1⁄2” by 64th with 42 compartments.• 2nd drawer is for #1 to #60 wire gauge with 75 compartments.• 3rd drawer for letter size A to Z with 42 compartments.• Bottom drawer is empty for additional storageBall bearing slides for easy drawer operation.Lockable, with 2 keys. Can be stacked for larger inventories.Dimensions: 26″ W x 12″ D x 121⁄2” H.Weight: 50 lbs.
