Huot

1/4″-20 thru 1″-12 tap dispenser Holds popular fractional sizes: 1/4″-20 NC, 1/4″-28 NF, 5/16″-18 NC, 5/16″-24 NF 3/8″-16 NC, 3/8″-24NF, 7/16″-14 NC, 7/16″-20 NF 1/2″-13 NC, 1/2″-20 NF, 9/16″-12 NC, 9/16″-18 NF 5/8″-11 NC, 5/8″-18NF, 3/4″-10 NC, 3/4″-16 NF 7/8″-9 NC, 7/8″-14 NF, 1″-8 NC, 1″-12 NF Stackable One piece drawer slide Finished with tough epoxy powder coating

Read more less

1/8″ to 1″ end millsFor small inventories1 Compartment for – 9/16″ – 11/16″ – 7/8″2 Compartments for – 3/16″ – 5/16″ – 7/16″ – 5/8″ – 1″3 Compartments for – 1/8″ – 1/4″ – 3/8″ – 3/4″4 Compartments for – 1/2″StackableOne piece drawer slideFinished with tough epoxy powder coatingCutting tools shown for display purposes only. Huot does not manufacture nor distribute cutting toolsAdditional information: Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

Metric drills, end mills, reamers – all in one 6 drawer cabinetCabinet holds metric drills, end mills, taps and reamersDrills – Metric .35mm to 2.5mm x .05mm, 2.6mm to 10mm x .1 and additional common sizes up to 13mmEnd Mills – Metric 2.0 to 7.0 x .5 and 8.0, 9.0, 10.0, 11.0, 12.0, 12.5Taps – 31 of most commonly used taps from 2.5mm x .45 to 30mm x 3.50mmReamers – Metric 1.0mm to 13.0mm x .5Lockable dispenserEquipped with smooth ball bearing drawer slidesAdditional: Weight 80 lbsDimensions 26 × 12 × 15.8125 in

Read more less

Master Cabinet for Metric End MillsFor metric end mills from 2.0mm to 25.0mm.68 pre-labeled compartments help you quickly locate and use the proper cutting tool.Holds the following metric end mills: 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 7.0mm, 8.0mm, 9.00mm, 10.0mm, 11.0mm, 12.0mm, 12.5mm, 13.0mm, 14.0mm, 15.0mm, 16.0mm, 17.0mm, 18.0mm, 19.0mm, 20.0mm, 21.0mm, 22.0, 23.00, 24.0mm, 25.00mm.Lockable, comes with two sets of keysStackableBall-bearing drawer slides standard equipmentAdditional: Weight 40 lbsDimensions 26 × 12 × 9.3125 in

Read more less

For 4 flute, single and double endTop Drawer 41 Compartments – Holds 6 each single end fractional end mills in following sizes: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2″. 3 each 5/8″, 3/4″, 7/8″, and 1″ with 6 extra compartments for specialsMiddle Drawer 41 Compartments – Holds 6 each double end fractional end mills in following sizes: 1/16″, 3/32″, 1/8″ with 3/16″ shank, 1/8″ with 3/8″ shank, 5/32″, 3/16″ with 3/16″ shank, 3/16″ with 3/8″ shank, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2″. 3 each 5/8″, 3/4″, 7/8″ and 1″Lower Drawer Undivided – Use for extra end mills, cutters, drills, reamers and miscellaneous tools.Optional drawer divider kit EDP14030 fits drawerLockable, comes with two sets of keysStackableBall-bearing drawer slides standard equipmentAdditional: Weight 40 lbsDimensions 26 × 12 × 9.3125 in

Read more less

For 2 flute, single and double endTop Drawer 41 Compartments – Holds 6 each single end fractional end mills in following sizes: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2″. 3 each 5/8″, 3/4″, 7/8″, and 1″ with 6 extra compartments for specialsMiddle Drawer 41 Compartments – Holds 6 each double end fractional end mills in following sizes: 1/16″, 3/32″, 1/8″ with 3/16″ shank, 1/8″ with 3/8″ shank, 5/32″, 3/16″ with 3/16″ shank, 3/16″ with 3/8″ shank, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2″. 3 each 5/8″, 3/4″, 7/8″ and 1″Lower Drawer Undivided – Use for extra end mills, cutters, drills, reamers and miscellaneous tools.Optional drawer divider kit EDP14030 fits drawerLockable, comes with two sets of keysStackableBall bearing drawer slides standard equipmentAdditional: Weight 40 lbsDimensions 26 × 12 × 9.3125 in

Read more less

1/8″ to 1″ x 64ths, taper shank/taper length drillsConveniently stores quantities of each size taper length or taper shank drills from 1/8″ to 1″ by 64ths.Vinyl drawer dividers separate and protect drillsDrawer dimensions: 23-1/8″ L x 11″ W (front to back)Lockable, comes with two sets of keysStackable with other dispensersBall bearing drawer slides standard equipmentAdditional: Weight 50 lbsDimensions 26 × 12.50 × 4.50 in

Read more less

1mm to 6.9mm by .1mm1mm to 6.9mm by .1mmHolds full packages of each size – (12 pc. Min.)Stackable for larger inventoriesOne piece drawer slide for long useful lifeDecimal equivalentsAdditional: Weight 13.75 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

1mm to 6.9mm by .1mmfor metric drills1mm to 13mm by .5mmHolds full packages of each size – (12 pc. Min.)Stackable for larger inventoriesOne piece drawer slide for long useful lifeDecimal equivalentsAdditional: Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

A to Z jobbers length drillsLetter SizeHolds full packages of each size – (12 pc. Min.)Stackable for larger inventories.One piece drawer slide for long useful life.Decimal equivalents.NSN: 5140-01-344-9854REF:0134498545140-01-344-9854

Read more less

#1 to #60 wire gage drills, jobbers length• Holds full packages of each size (12 pc. Min.)• Stackable for larger inventories• One piece drawer slide for long useful life• Decimal equivalentsAdditional: Weight Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

This universal master storage cabinet has four drawers, mounted on full extension ball bearing slides.The top three drawers have solid welded drawer dividers front to back provide a rigid surface with no holes to lose parts. Each unit comes with 72 individual drawer dividers to customize your storage needs. The galvanized steel dividers have angled tops creating a perfect location for bar codes or ID labels.Bottom drawer open for additional undivided storage.Cam lock. with 2 keys, secures the cabinet.Can be stacked with other Huot cabinets.Steel construction, finished in powder coated battleship gray.Dimensions: 26″ W x 12″ D x 12-1⁄2” H.Weight: 56 lbs.Additional: Weight 56.00 lbsDimensions 12 × 26 × 12.50 in

Read more less

5 Adjustable shelves for HSK 100A. Each shelf holds 10 toolholders (50 total) Every toolholder is lined with custom nylon grommets designed for maximum protection of your valuable tools.Shelves can be set flat or at a 20 degree angle1 Utility shelf to hold your collet racks, tools, Butcher-Block for mounting your vise. (Collet racks, butcher-block sold separate)70 Matching slot locations (35 per side)for maximum shelf adjustment. Every 5th slot marked for easy alignment. Adjustable height handle. 3 built-in top slots for securing spanner wrenches. Rugged unibody arched design and made from 14-gauge CRS. Heavy duty 5″ casters rated up to 1200 pounds. Additional: Weight 160 lbsDimensions 28 × 28.5 × 57 in

Read more less

5 Adjustable shelves for 40 taper. Each shelf holds 18 toolholders (90 total) Every toolholder is lined with custom nylon grommets designed for maximum protection of your valuable tools.Holds BT, CAT “V” flange, NMTB 40 taper toolholdersShelves can be set flat or at a 20 degree angle1 Utility shelf to hold your collet racks, tools, Butcher-Block for mounting your vise. (Collet racks, butcher-block sold separate)70 Matching slot locations (35 per side)for maximum shelf adjustment. Every 5th slot marked for easy alignment. Adjustable height handle. 3 built-in top slots for securing spanner wrenches. Rugged unibody arched design and made from 14-gauge CRS. Heavy duty 5″ casters rated up to 1200 pounds. Additional sizes available. Additional colors available.Weight 160 lbsDimensions 28 × 28.5 × 57 in

Read more less

For COROMANT CAPTO® Tooling, C5Holds (24) taper tools (COROMANT CAPTO® C5)Angled for visibility and easier selection of stored toolsNylon inserts help protect toolingMountable on bench topHeavy gauge steelTough, epoxy finish for long lasting protectionAdditional: Weight 15 lbsDimensions 27 × 20.25 × 11 in

Read more less

For COROMANT CAPTO® Tooling, C4Holds (24) taper tools (COROMANT CAPTO® C4)Angled for visibility and easier selection of stored toolsNylon inserts help protect toolingMountable on bench topHeavy gauge steelTough, epoxy finish for long lasting protectionAdditional: Weight 15 lbsDimensions 27 × 20.25 × 11 in

Read more less

8 drawers 2″ highEach drawer measures 29″ W x 18″ D x 2″ H240 adjustable dividers included with SuperCab. Dividers have angled tops creating a perfect location for bar code or inventory tagsSolid welded drawer dividers front to back provide a rigid smooth surface with no holes to lose partsHeavy Duty ball-bearing drawer slides provide full-extension of the drawerLabel holders provide identification at a glanceSteel skid keeps unit off floor and allows for stacking for even greater space savings18 gauge , all steel construction with powder coat paint.Rugged, exclusive I-beam double wall construction gives you maximum strength and overall durabilityHeavy duty ace type cam lock with 2 keysAdditonal information: Weight 220 lbsDimensions 19.125 × 34 × 23.125 in

Read more less

Holds up to 36 collets, hole size 43/64″Protects, stores and organizes your valuable colletsMountable on bench topFit within 2” to 4” drawerAll racks conveniently fit in the ToolScoot and Tool Tower storage traysHeavy 14 gauge steelFinished with durable epoxy, powder paint for long lasting protectionAddiitonal: Weight 2.00 lbsDimensions 9.125 × 17 × 2 in

Read more less

Protects, stores and organizes your valuable colletsMountable on bench topAll racks conveniently fit in the ToolScoot and Tool Tower storage traysHeavy 14 gauge steelFinished with durable epoxy, powder paint for long lasting protectionAdditional: Weight 2.00 lbsDimensions 9.125 × 17 × 2 in

Read more less

DA300 collet RackHolds up to 49 collets, hole size 5/16″Protects, stores and organizes your valuable colletsMountable on bench topFit within 2” to 4” drawerAll racks conveniently fit in the ToolScoot and Tool Tower storage traysHeavy 14 gauge steelFinished with durable epoxy, powder paint for long lasting protectionAdditional: Weight 2.0 lbs

Read more less

Super cutting tool storage cabinet, 8 drawers7 drawers 4″ high, 1 drawer 2″ highSeven drawers measure 29″ W x 18″ D x 4″ HOne drawer measures 29″ W x 18″ D x 2″H240 adjustable dividers included with SuperCab. Dividers have angled tops creating a perfect location for bar code or inventory tagsSolid welded drawer dividers front to back provide a rigid smooth surface with no holes to lose partsHeavy Duty ball-bearing drawer slides provide full-extension of the drawerLabel holders provide identification at a glanceSteel skid keeps unit off floor and allows for stacking for even greater space savings18 gauge , all steel construction with powder coat paint.Rugged, exclusive I-beam doublewall constructionHeavy duty ace cam lock with 2 keysAdditional information: Weight 375 lbsDimensions 19.125 × 34 × 38 in

Read more less

Master Metric Drill CabinetHolds metric drill bits from 1mm to 25mm x 0.5mm.Heavy duty ball bearing drawer slides.All steel cabinet with vinyl dividers to help protect and separate bits.Stackable with all Huot Master dispensers for larger inventories in one location.Built in cam lock with two keys.Additional information: Weight: 50 lbsDimensions: 26 × 12 × 9.3125 in

Read more less

1mm to 13mm by .5mm stub drillsHolds full packages of each size – (12 pc. Min.)Stackable for larger inventories.One-piece drawer slide for long useful life.Decimal equivalents.Additional: Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

A to Z stub length drills Letter Size Holds full packages of each size – (12 pc. Min.) Stackable for larger inventories. One piece drawer slide for long useful life. Decimal equivalents.

Read more less