Products

1/16″ to 1/2″ x 64ths counter display for jobbers drills All steel welded outer shell Clear, hinged polycarbonate front for high visibility and shatterproof durability Lockable with own set of two keys Steel drill gauge on top assures correct sizing of drills All compartments display drills vertically to use less counter space, and are rounded to make small drills readily accessible Attractive, Royal Blue finish (Red shown in photo) Compact, takes less counter space Makes excellent use of counter space for impulse sales

Read more less

Taps and dies counter display Holds these sizes: 1/8-27 NPT, 4-40 NC, 6-32 NC, 8-32 NC 10-24 NC, 10-32 NF, 12-24 NC, 1/4-20 NC *1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8-16 NC 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC 1/2-20 NF, 9/16-12 NC, 9/16-18 NF, 5/8-11 NC *5/8-18 NF, 3/4-10 NC, 3/4-16 NF, T-Handle Wrench 0 to 1/4″ All steel welded outer shell Clear, hinged polycarbonate front for high visibility and shatterproof durability Lockable with own set of two keys Steel drill gauge on top assures correct sizing of drills All compartments display drills vertically to use less counter space, and are rounded to make small drills readily accessible Attractive, bright red epoxy finish to enhance drill sales Compact, takes less counter space Makes excellent use of counter space for impulse sales

Read more less

6 drawer cabinet holds 103 different sizes of silver deming drillsCabinet holds the following Silver Deming drills, 33/64ths to 1″ by 64ths,as well as 1-1/32″, 1-1/16″, 1-1/8″, 1-3/16″, 1-1/4″, 1-3/8″, 1-1/2″.Contains a total of 110 compartments103 identified for each size Silver Deming drillAdditional 7 compartments for specialized requirements.Lockable dispenser with 2 keysEquipped with smooth ball bearing drawer slidesADDITIONAL: Weight 80 lbsDimensions 26 × 12 × 15.8125 in

Read more less

S&D Drills 33/64″ to 63/64″ by 1/64ths Holds 2 each Reduced shank S/D bits From 33/64ths to 63/64ths by 64ths Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating

Read more less

S&D Drills 1″ to 1-1/2″ assorted Holds 2 each Reduced shank S/D bits From 1″, 1-1/32, 1-1/16, 1-1/8, 1-5/32, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating

Read more less

This universal master storage cabinet has four drawers, mounted on full extension ball bearing slides.The top three drawers have solid welded drawer dividers front to back provide a rigid surface with no holes to lose parts. Each unit comes with 72 individual drawer dividers to customize your storage needs. The galvanized steel dividers have angled tops creating a perfect location for bar codes or ID labels.Bottom drawer open for additional undivided storage.Cam lock. with 2 keys, secures the cabinet.Can be stacked with other Huot cabinets.Steel construction, finished in powder coated battleship gray.Dimensions: 26″ W x 12″ D x 12-1⁄2” H.Weight: 56 lbs.Additional: Weight 56.00 lbsDimensions 12 × 26 × 12.50 in

Read more less

Category: Master Drill Dispensers U.S. SizesHolds full packages (minimum of 12 pcs.) of jobber or screwmachine length drills, fractional, letter and wire gauge sizes in onecomplete cabinet.• Top drawer holds fractional drills 1⁄16” to 1⁄2” by 64th with 42 compartments.• 2nd drawer is for #1 to #60 wire gauge with 75 compartments.• 3rd drawer for letter size A to Z with 42 compartments.• Bottom drawer is empty for additional storageBall bearing slides for easy drawer operation.Lockable, with 2 keys. Can be stacked for larger inventories.Dimensions: 26″ W x 12″ D x 121⁄2” H.Weight: 50 lbs.

Read more less

Metric drills, .35 to 2.5 x .05, 2.6 to 10 x .1, assorted to 13mm138 compartments to store and inventory all your metric drill bitsHolds metric drills from .35mm to 13.00mmSizes include: .35mm to 2.50mm by .05mm, 2.6mm to 10.0mm by .1mm, 10.2mm, 10.5mm, 10.8mm, 11.0mm, 11.2mm, 11.5mm, 11.8mm, 12.0mm, 12.2mm, 12.5mm, and 13.0mmBall Bearing Slides Standard EquipmentAll steel cabinet with vinyl dividers to help protect and separate bits.Each cabinet is lockable with its own set of 2 keys.Each drawer measures 23-1/8″ wide; 11″ front to back.Stackable for larger inventories at one location.Lower drawer is undivided for extra long drills, reamers and miscellaneous tools or storage. *Drawer Divider Kit available for lower drawer (EDP14030)ADDITIONAL INFORMATION: Weight 50 lbsDimensions 26.000 × 12.500 × 9.3125 in

Read more less

1/8″ to 1″ x 64ths, taper shank/taper length drillsConveniently stores quantities of each size taper length or taper shank drills from 1/8″ to 1″ by 64ths.Vinyl drawer dividers separate and protect drillsDrawer dimensions: 23-1/8″ L x 11″ W (front to back)Lockable, comes with two sets of keysStackable with other dispensersBall bearing drawer slides standard equipmentAdditional: Weight 50 lbsDimensions 26 × 12.50 × 4.50 in

Read more less

Drills, fractional, letter, wire, metric – all in one 6 drawer cabinetCabinet holds fractional drills 1/16″ to 1/2″ by 64ths1 to 60 wire gageA to Z letter sizesMetric from 0.35mm to 13.00mm including 0.35mm to 2.50mm x .05mm, 2.6mm to 10.0mm x .1mm, and 10.2, 10.5, 10.8, 11.0, 11.2, 11.5, 11.8, 12.0, 12.2, 12.5, 13.0mmWill hold a minimum of full packages of each sizeLockable dispenserEquipped with smooth ball bearing drawer slidesLockable, comes with set of two keysStackableADDITIONAL INFORMATION; Weight 80 lbsDimensions 26 × 12 × 15.8125 in

Read more less

Carbide burr dispenser, popular sizes Holds the following sizes: Cylindrical 1/4″ x 5/8″, Cyl. Rad. End 1/4″ x 5/8″, Ball 1/4″ x 1/4″ Oval 1/4″ x 3/8″, Tree Rad. 1/4″ x 3/4″, Tree/Pointed 1/4″ x 3/4″ Cone/Rad. End 1/4″ x 5/8″, Cylindrical 3/8″ x 3/4″, Cyl./Rad. End 3/8″ x 3/4″ Ball 3/8″, Oval 3/8″ x 5/8″, Tree/Rad. End 3/8″ x 3/4″ Tree/Pointed 3/8″ x 3/4″, Cone/Rad. End 3/8″ x 1-1/16″, Cone/Flat End 1/4″ x 1″ Cone/Rad. End 1/2″ x 1-1/8″, Cone/Flat End 3/8″ x 1″, Cylindrical 1/2″ x 1″ Cyl./Rad. End 1/2″ x 1″, Ball 1/2″, Oval 1/2″ x 7/8″ Tree/Rad. End 1/2″ x 1″, Tree/Pointed 1/2″ x 1″, Cone/Flat End 1/2″ x 1″ One piece drawer slide Stackable Finished with tough epoxy powder coating

Read more less

For 2 flute, single and double endTop Drawer 41 Compartments – Holds 6 each single end fractional end mills in following sizes: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2″. 3 each 5/8″, 3/4″, 7/8″, and 1″ with 6 extra compartments for specialsMiddle Drawer 41 Compartments – Holds 6 each double end fractional end mills in following sizes: 1/16″, 3/32″, 1/8″ with 3/16″ shank, 1/8″ with 3/8″ shank, 5/32″, 3/16″ with 3/16″ shank, 3/16″ with 3/8″ shank, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2″. 3 each 5/8″, 3/4″, 7/8″ and 1″Lower Drawer Undivided – Use for extra end mills, cutters, drills, reamers and miscellaneous tools.Optional drawer divider kit EDP14030 fits drawerLockable, comes with two sets of keysStackableBall bearing drawer slides standard equipmentAdditional: Weight 40 lbsDimensions 26 × 12 × 9.3125 in

Read more less

Huot TriScoot CNC Tool Cart for 30 Taper Toolholders The world famous Huot ToolScoot is now available with 3 shelves for even more storage in the same footprint. This cart is ruggedly built just like the original, but with a third more capacity and standing almost 7″ taller. EDP 13309 holds up to 72 BT, CAT V Flange, NMBT 30 taper toolholders.

Read more less

Huot Master Dispenser for Measuring Tools Ever wonder why your measuring tools are so beat up? Put those expensive and valuable tools in their own dedicated cabinet. Sturdy steel construction Durable gray powder coating finish Designed for vernier calipers, micrometers, etc. Stackable with other Huot Masters using stacking clips, included Oil and grease resistant foam drawer liners provide a soft storage surface 3 drawers provide ample storage Ball bearing drawer slides for smooth operation Dispenser locks for added security. Includes 2 keys.

Read more less

For 4 flute, single and double endTop Drawer 41 Compartments – Holds 6 each single end fractional end mills in following sizes: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2″. 3 each 5/8″, 3/4″, 7/8″, and 1″ with 6 extra compartments for specialsMiddle Drawer 41 Compartments – Holds 6 each double end fractional end mills in following sizes: 1/16″, 3/32″, 1/8″ with 3/16″ shank, 1/8″ with 3/8″ shank, 5/32″, 3/16″ with 3/16″ shank, 3/16″ with 3/8″ shank, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2″. 3 each 5/8″, 3/4″, 7/8″ and 1″Lower Drawer Undivided – Use for extra end mills, cutters, drills, reamers and miscellaneous tools.Optional drawer divider kit EDP14030 fits drawerLockable, comes with two sets of keysStackableBall-bearing drawer slides standard equipmentAdditional: Weight 40 lbsDimensions 26 × 12 × 9.3125 in

Read more less

Master Dispenser Stand*  Easy & convenient tool selection without bending over*  Adjustable feet provide easy leveling*  Rigid steel construction*  Master Dispensers fit neatly into the top of the stand*  Easily assembles in just minutes*  Black texture powder‐cote finish for long life Stand raises your Master Dispenser approximately 12”

Read more less

Master Dispenser Stand*  Easy & convenient tool selection without bending over*  Adjustable feet provide easy leveling*  Rigid steel construction*  Master Dispensers fit neatly into the top of the stand*  Assembles in just minutes*  Black texture powder coat finish for long life Stand raises your Master Dispenser approximately 26″

Read more less

1/8″ to 1″ end millsFor small inventories1 Compartment for – 9/16″ – 11/16″ – 7/8″2 Compartments for – 3/16″ – 5/16″ – 7/16″ – 5/8″ – 1″3 Compartments for – 1/8″ – 1/4″ – 3/8″ – 3/4″4 Compartments for – 1/2″StackableOne piece drawer slideFinished with tough epoxy powder coatingCutting tools shown for display purposes only. Huot does not manufacture nor distribute cutting toolsAdditional information: Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

Master Cabinet for Metric End MillsFor metric end mills from 2.0mm to 25.0mm.68 pre-labeled compartments help you quickly locate and use the proper cutting tool.Holds the following metric end mills: 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 7.0mm, 8.0mm, 9.00mm, 10.0mm, 11.0mm, 12.0mm, 12.5mm, 13.0mm, 14.0mm, 15.0mm, 16.0mm, 17.0mm, 18.0mm, 19.0mm, 20.0mm, 21.0mm, 22.0, 23.00, 24.0mm, 25.00mm.Lockable, comes with two sets of keysStackableBall-bearing drawer slides standard equipmentAdditional: Weight 40 lbsDimensions 26 × 12 × 9.3125 in

Read more less

Stores the following reamers:1 ⁄8"-4 ea., .1230 d/p, .1240 under, .1247 d/p, .1260 over, 3 ea.3 ⁄16", .1855 d/p, .1865 under, .1870 d/p, .1885 over, 3 ea.1 ⁄4"-4 ea., .2480 d/p, .2490 under, .2495 d/p, .2510 over, 3 ea.5 ⁄16"-3 ea., .3105 d/p-3 ea., .3115 under 2 ea., .3120 d/p-2ea.,.3135 over-2 ea. 3 ⁄8"-4 ea., .3730 d/p, .3740 under, .3745 d/p,.3760 over, 3 ea. 7 ⁄16", .4355 d/p, .4365 under, .4370 d/p,.4385 over, 2 ea. 1 ⁄2"-4 ea., .4980 d/p-2 ea., .4990 under,.4995 d/p, .5010 over, 3 ea.Additional: Weight 40 lbsDimensions 12 × 26 × 9.312 in

Read more less

Huot TriScoot for 40 Taper Toolholders The world famous Huot ToolScoot is now available with 3 shelves for even more storage in the same footprint. This cart is ruggedly built just like the original, but with a third more capacity and standing almost 7″ taller. EDP 13409 holds up to 72 BT, CAT V Flange, NMBT 40 taper toolholders.

Read more less

1/16″ to 1/2″ reamers, 4 drawer dispenser Fractional Reamers 1/16″ to 1/2″ by 64ths Decimal equivalents also listed Ideal where compact space is a must 4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes One piece drawer slide Finished with tough epoxy powder coating

Read more less