Products

A to Z reamers, 3 drawer dispenser A to Z Reamers Decimal equivalents also listed Ideal where compact space is a must 4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes One piece drawer slide Finished with tough epoxy powder coating

Read more less

#1 to #60 reamers, 5 drawer dispenser Wire gauge sizes #1 to #60 Decimal equivalents also listed Ideal where compact space is a must 4 stackable models for reamer organization in Fractional, A to Z, wire gauge sizes, over/under dowel pin sizes One piece drawer slide Finished with tough epoxy powder coating

Read more less

CNC Tool Tower for 40 taper tool holdersIndividual units are 3′ tall3 shelves – 24 toolholders per shelfNylon inserts protect each tool holderSturdy 16 gauge steel constructionTool Tower should be bolted to the floor for additional securityCasters should never be used on a stacked CNC Tower as this could be extremely dangerousAdditional: Weight 65 lbsDimensions 27.3125 × 18.3175 × 36 in

Read more less

Four drawer cabinet stores the following reamers: Fractional Reamers 1⁄16” to 1⁄2“ Over/Under Reamers from .1240 to .5010 Dowel Pin Reamers from .1230 to .4995 Metric Reamers from 1.0mm to 13.0mm x .5 Locakable with 2 keys

Read more less

1/4″-20 thru 1″-12 tap dispenser Holds popular fractional sizes: 1/4″-20 NC, 1/4″-28 NF, 5/16″-18 NC, 5/16″-24 NF 3/8″-16 NC, 3/8″-24NF, 7/16″-14 NC, 7/16″-20 NF 1/2″-13 NC, 1/2″-20 NF, 9/16″-12 NC, 9/16″-18 NF 5/8″-11 NC, 5/8″-18NF, 3/4″-10 NC, 3/4″-16 NF 7/8″-9 NC, 7/8″-14 NF, 1″-8 NC, 1″-12 NF Stackable One piece drawer slide Finished with tough epoxy powder coating

Read more less

Huot TriScoot CNC Tool Cart for 50 Taper Toolholders Increased storage compared to the world famous Huot ToolScoot This cart is ruggedly built just like the original, but with a third more capacity and standing almost 7″ taller. Cart holds up to 54 BT, CAT V Flange, NMBT 50 taper toolholders.

Read more less

Super storage cabinet, 15 drawers 15 drawers 2″ high Each drawer measures 29″ W x 18″ D x 2″ H 480 adjustable dividers included with SuperCab. Dividers have angled tops creating a perfect location for bar code or inventory tags Solid welded drawer dividers front to back provide a rigid smooth surface with no holes to lose parts Heavy Duty ball-bearing drawer slides provide full-extension of the drawers Label holders provide identification of the drawers at a glance Steel skid keeps unit off floor and allows for stacking for even greater space savings (Not recommended to stack over two units high) 18 gauge , all steel construction with powder coat paint finish. Rugged, exclusive I-beam double wall construction Heavy duty ace cam lock with 2 keys

Read more less

Super cutting tool storage cabinet, 8 drawers7 drawers 4″ high, 1 drawer 2″ highSeven drawers measure 29″ W x 18″ D x 4″ HOne drawer measures 29″ W x 18″ D x 2″H240 adjustable dividers included with SuperCab. Dividers have angled tops creating a perfect location for bar code or inventory tagsSolid welded drawer dividers front to back provide a rigid smooth surface with no holes to lose partsHeavy Duty ball-bearing drawer slides provide full-extension of the drawerLabel holders provide identification at a glanceSteel skid keeps unit off floor and allows for stacking for even greater space savings18 gauge , all steel construction with powder coat paint.Rugged, exclusive I-beam doublewall constructionHeavy duty ace cam lock with 2 keysAdditional information: Weight 375 lbsDimensions 19.125 × 34 × 38 in

Read more less

8 drawers 2″ highEach drawer measures 29″ W x 18″ D x 2″ H240 adjustable dividers included with SuperCab. Dividers have angled tops creating a perfect location for bar code or inventory tagsSolid welded drawer dividers front to back provide a rigid smooth surface with no holes to lose partsHeavy Duty ball-bearing drawer slides provide full-extension of the drawerLabel holders provide identification at a glanceSteel skid keeps unit off floor and allows for stacking for even greater space savings18 gauge , all steel construction with powder coat paint.Rugged, exclusive I-beam double wall construction gives you maximum strength and overall durabilityHeavy duty ace type cam lock with 2 keysAdditonal information: Weight 220 lbsDimensions 19.125 × 34 × 23.125 in

Read more less

2-56 thru 12-28 tap dispenserEach size holds taper, plug, bottoming, and spiral point taps60 compartmentsHolds machine screw sizes:2-56, 3-48, 3-56, 4-40, 4-485-40, 5-44, 6-32, 6-40, 8-328-36, 10-24, 10-32, 12-24, 12-28StackableOne piece drawer slideFinished with tough epoxy powder coatingADDITONAL; Weight 10.50 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

NPT dispenser Holds all sizes of National Pipe Taps (NPT) from 1/16” to 2” Top drawer has 13 compartments; 2 for 1/16” – 27, 2 for 1/8” – 27, 3 for 1/4” – 18, 3 for 3/8” – 18, 3 for 1/2” – 14, Middle drawer has 6 compartments – 3 for 3/4” – 14, 2 for 1” – 11-1/2”, and 1 oversized compartment for 1-1/4” – 11-1/2” Bottom drawer has 2 oversized compartments – 1 for 1-1/2” – 11-1/2”, and 1 for 2” – 11-1/2” Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating

Read more less

Counterbore Dispenser, Original All steel cabinet with vinyl drawer dividers to help protect and separate counterbores. Stackable with all Huot “Original” style dispensers. Holds continuous pilot counterbores sizes #4, #5, #6,#8, #10, #12, ¼”, 5/16”, 3/8”, 7/16”, & ½”.

Read more less

3mm to 24mm metric tap dispenserHolds 29 popular metric sizes:3 mm x .50, 3 mm x .60, 4 mm x .704 mm x .75, 5 mm x .80, 5 mm x .906 mm x 1.00, 6.3 mm x 1.00, 7 mm x 1.008 mm x 1.00, 8 mm x 1.25, 9 mm x .759 mm x 1.00, 9 mm x 1.25, 10 mm x 1.0010 mm x 1.25, 10 mm x 1.50, 11 mm x 1.5012 mm x 1.25, 12 mm x 1.50, 12 mm x 1.7514 mm x 1.25, 14 mm x 1.50, 14 mm x 2.0016 mm x 1.50, 16 mm x 2.00, 18 mm x 2.5020 mm x 2.50, 24 mm x 3.00StackableOne piece drawer slideFinished with tough epoxy powder coatingADDITIONAL DESCRIPTION; Weight 10.50 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

Holds bottom, plug, taper and spiral tapsFor sizes 1/4″-20 to 1″-14 taps many compartments hold multiples of a given size tapHolds bottom, plug and taper of each size: 1/4″ – 20, 1/4″ – 28, 5/16″ – 18, 5/16″ – 24, 3/8″ – 16, 3/8″ – 24, 7/16″ – 14, 7/16″ – 20, 1/2″ – 13, 1/2″ – 20, 9/16″ – 12, 9/16″ – 18, 5/8″ – 11, 5/8″ – 18, 3/4″ – 10, 3/4″ – 16, 7/8″ – 9, 7/8″ – 14, 1″ – 8, 1″ – 14Holds taper, plug, bottom and spiral: 2-56, 3-48, 3-56, 4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28Extruded vinyl drawer dividers protect taps.Top drawer has 40 compartments.Second drawer has 78 compartments.Third drawer has 21 compartments.Fourth drawer has 13 compartments.Stackable for larger inventories.LockableBall bearing slides standard equipmentAdditonal: Weight 50 lbsDimensions 26 × 12 × 12.5 in

Read more less

Category: Tap and Tap Drill This Master Dispenser holds common NC and NF, metric, machine screw sizesHolds most common NC and NF sizes from ¼” to 1 ½”Holds metrics from 2.5 mm to 30 mm.Holds machine screw size 2-56 through 12-28, taper, plug, bottom and spiral.Extruded vinyl drawer dividers protect taps.Top drawer has 40 compartments.Second drawer has 78 compartments.Third drawer has 21 compartments.Fourth drawer has 13 compartments.Stackable for larger inventories.Built in integral lock with 2 keysBall bearing slides standard equipmentADDITONAL; Weight 50 lbsDimensions 26 × 12 × 12.5 in

Read more less

Tap and drill dispenser, 6-32 #36 to 1/2″-20 #29/64Stores and organizes correct drill with corresponding size tap.Holds one dozen (minimum) of each sizeTAP DRILL6 – 32, #368 – 32, #2910 – 24, #2510 – 32, #211/4 – 20, #71/4 – 28, #35/16 – 18, F5/16 – 24, I3/8 – 16, 5/163/8 – 24, Q7/16 – 14, U7/16 – 20, 25/641/2 – 13, 27/641/2 – 20, 29/64Label holders on drawer fronts permit easy, quick identification and inventory checkOne-piece drawer slideStackable with other cutting tool storage cabinets to save spaceFinished with tough epoxy powder coatingADDITIONAL INFORMATION; Weight 10.25 lbsDimensions 14.625 × 7.375 × 7.75 in

Read more less

Space saving combination dispenser The dispenser for metric taps, drills and dies. From 2.5 x .45 tap to 12.0 x 1.75 tap Top drawer holds: 2.5 x .45 tap – 2.05 drill, dies 3.0 x .50 tap – 2.50 drill; dies 3.5 x .60 tap – 2.90 drill, dies 4.0 x .70 tap – 3.30 drill, dies Room in top drawer for your T-handle wrench. Middle drawer holds: 5.0 x .80 tap – 4.20 drill, dies 6.0 x 1.0 tap – 5.0 drill, dies 8.0 x 1.25 tap – 6.70 drill, dies Bottom drawer holds: 10.0 x 1.50 tap – 8.50 drill, dies 12.0 x 1.75 tap – 10.20 drill, dies Label holders on drawer fronts permit easy, quick identification and inventory check One piece drawer slide Stackable with other cutting tool storage cabinets to save space Finished with tough epoxy powder coating

Read more less

Metric Tap and Drill Cabinet, Master Conveniently holds metric tap with the corresponding metric tap drill. Holds metric tap and drill sizes M1.6 x 0.35 tap with 1.25mm drill to M24 x 2.0 tap with 22.00mm drill. Holds approximately one dozen each of the smaller sizes and at least several of each of each of the larger sizes. Built in cam lock with two keys. Heavy duty ball-bearing drawer slides for easy use and long service life.

Read more less

Master series cabinet for carbide insertsHolds Square, Triangular, Diamond and Round Inserts, with additional space for Specials36 Compartments to hold packages or loose inserts. Measures 3-3/4″ W x 5-1/2″ DPre-labeled for insert shapeLabel set included for your personalized marking of size, radius, grind and thicknessLockable, comes with set of two keysStackable with other Huot dispensersBall bearing drawer slides for long, useful lifeADDITONAL INFO; Weight 50 lbsDimensions 26 × 12.50 × 12.50 in

Read more less

Huot ToolScoot Limited 40 Taper CNC Tool Cart • Ideal for special ops applications • Total toolholder capacity of 24 • Molded inserts protect and securely hold toolholders • Sturdy steel construction with scratch resistant powder finish • Drawers use full extension ball bearings slides • 2″ drawer with welded columns and adjustable dividers • 6″ drawer has two sets of ball bearing slides for larger tools and greater weight capacity • Welded chassis adds strength and rigidity • Minimal assembly required, simply bolt on casters • Side tray holds collet racks, tool changing vise or miscellaneous tools • Grab handle for easy maneuverability • Dimensions are 41″ L x 35.25″ H x 18″ D • Casters are load rated to 1600 lbs Shipping weight is 92 lbs, LTL shipping only.

Read more less

Carbide insert “original” series dispenserDesigned to keep inserts at each work centerCompact size keeps the most frequently used inserts within fingertip reachThree drawers have a moveable divider with a large fourth drawer to store tool holders and extra insertsLabel holders on drawer fronts permit easy, quick identification and inventory checkOne piece drawer slideStackable with other cutting tool storage cabinets to save spaceFinished with tough epoxy powder coating

Read more less

The Huot Step Drill Dispenser gives you plenty of organizational capacity in a compact, handy size.Store your step drills (and center drills if you use them) in tidy compartments that are each roomy enough to hold multiple bits. Use our pre printed labels or create your own using our pro label holder system (included) Adjacent compartments can hold additional step drills of the same size, different sizes, corresponding center drills, etc. Pre-labeled for 1/8″ to 1-3/8″ sizes

Read more less

ToolScoot Limited 50 Taper CNC Tool Cart • Ideal for special ops applications • Total toolholder capacity of 18 • Molded inserts protect and securely hold toolholders • Sturdy steel construction with scratch resistant powder finish • Drawers use full extension ball bearings slides • 2″ drawer with welded columns and adjustable dividers • 6″ drawer has two sets of ball bearing slides for larger tools and greater weight capacity • Welded chassis adds strength and rigidity • Minimal assembly required, simply bolt on casters • Side tray holds collet racks, tool changing vise or miscellaneous tools • Grab handle for easy maneuverability • Dimensions are 41″ L x 35.25″ H x 18″ D • Casters are load rated to 1600 lbs Shipping weight is 92 lbs, LTL shipping only.

Read more less