E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
HI-002-WH
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
2-56
External Thread:
N/A
Installed Length:
0.16
Drill Size:
.126
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-832-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
8-32
External Thread:
N/A
Installed Length:
0.36
Drill Size:
.220
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-632-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
6-32
External Thread:
N/A
Installed Length:
0.31
Drill Size:
.189
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-518-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
5/16-18
External Thread:
N/A
Installed Length:
0.55
Drill Size:
.378
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-440-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
4-40
External Thread:
N/A
Installed Length:
0.25
Drill Size:
.157
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-428-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-28
External Thread:
N/A
Installed Length:
0.55
Drill Size:
.315
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-420-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-20
External Thread:
N/A
Installed Length:
0.55
Drill Size:
.315
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-316-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
3/8-16
External Thread:
N/A
Installed Length:
0.56
Drill Size:
.469
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-132-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
10-32
External Thread:
N/A
Installed Length:
0.42
Drill Size:
.252
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-132-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
10-32
External Thread:
N/A
Installed Length:
0.42
Drill Size:
.252
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
FL-124-HI
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
10-24
External Thread:
N/A
Installed Length:
0.42
Drill Size:
.252
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 653-10, (10x) 653-8, (10x) 653-6, (6x) 653-12
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 650-10, (10x) 650-8, (10x) 650-6, (6x) 650-12
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 550-3, (6x) 550-8, (8x) 550-6, (10x) 550-5, (10x) 550-4
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 453-10, (10x) 453-8, (5x) 453-16, (8x) 453-12
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 450-10, (10x) 450-8, (5x) 450-16, (8x) 450-12
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 453-5, (10x) 453-8, (10x) 453-4, (10x) 453-3, (10x) 453-6
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 450-3, (10x) 450-6, (10x) 450-5, (10x) 450-8, (10x) 450-4
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (7x) 329-10F, (2x) 329-1614, (6x) 329-820, (7x) 329-1216
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Our solid threaded insert assortment kits contain inserts in a range of sizes, making it easy to find the right size for nearly any application. Manufactured from carbon steel or 303 stainless steel. 17 kit options are available.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 313-332, (6x) 313-820, (10x) 313-624, (10x) 313-524, (10x) 313-428
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Our solid threaded insert assortment kits contain inserts in a range of sizes, making it easy to find the right size for nearly any application. Manufactured from carbon steel or 303 stainless steel. 17 kit options are available.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (6x) 303-820, (10x) 303-624, (10x) 303-524, (10x) 303-428, (10x) 303-332
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Our solid threaded insert assortment kits contain inserts in a range of sizes, making it easy to find the right size for nearly any application. Manufactured from carbon steel or 303 stainless steel. 17 kit options are available.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 319-332, (6x) 319-820, (10x) 319-624, (10x) 319-524, (10x) 319-428
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Our solid threaded insert assortment kits contain inserts in a range of sizes, making it easy to find the right size for nearly any application. Manufactured from carbon steel or 303 stainless steel. 17 kit options are available.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 329-332, (6x) 329-820, (10x) 329-624, (10x) 329-524, (10x) 329-428
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Our solid threaded insert assortment kits contain inserts in a range of sizes, making it easy to find the right size for nearly any application. Manufactured from carbon steel or 303 stainless steel. 17 kit options are available.
Assortment kits let you keep a range of sizes on hand.
Features
Ideal for soft metals, like aluminum, cast iron, and magnesium
All inserts install using standard drills and taps.
All install using standard drills and taps.
Kit Contains: (10x) 329-332, (8x) 329-720, (10x) 329-624, (10x) 329-524, (10x) 329-428
Applications:
Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike E-Z Coil™ inserts, which require a special tap and installation tool, E-Z LOK™ (Solid Wall) threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.
Simply drill the appropriately sized hole with a standard drill
Tap the hole with a standard tap
Turn in the E-Z LOK™ (Solid Wall) insert like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK™ drive tool.
E-Z LOK™ (Solid Wall) threaded inserts are self-locking and open immediately upon installation. The pre-applied LOCTITE™ on the external threads sets immediately allowing for the newly installed insert to be fastener ready.E-Z LOK solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
