Products
DESMOND Desmond WASHER S. (Set of 2) #1 Replacement Washer for Scarifier Cutters
11330 TO 44888
$0.49
![Dymonic® 100 Cartridge]()
Tremco Dymonic® 100 Cartridge
Dymonic® 100 is a high-performance, high-movement, single-component, medium-modulus, low-VOC, UV-stable, non-sag polyurethane sealant. Basic Uses Dymonic 100 is a durable, flexible sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured. Typical applications for Dymonic 100 include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors, and panels), aluminum, masonry and vinyl siding. Dymonic 100 is also an excellent choice as a fluid applied flashing material in rough opening perimeters for fenestration/window, door and curtain wall applications. View Data Sheet Benefits of Using Dymonic 100 in Your Next Project Fast Installation Tack-free in 15 mins Improved Aesthetics Available in a wide variety of colors with custom color matching options available Enhanced Aesthetics Paintable after cure Fire Rated Included in several fire rated systems Exceptional Movement High elasticity provides movement capacity of +100/-50% UV Stable Will not crack, craze or yellow under extreme UV exposure Multi-Use Interior and exterior caulking, and as a back-bedding glazing compound Dymonic 100 Is Best For Expansion and control joints Precast concrete panel joints Perimeter caulking Fluid-applied flashing Water immersion applications Use over Nudura insulated concrete forms (ICF)
$9.17
Tremco Dymonic® 100 Sausage
Dymonic® 100 is a high-performance, high-movement, single-component, medium-modulus, low-VOC, UV-stable, non-sag polyurethane sealant. Basic Uses Dymonic 100 is a durable, flexible sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured. Typical applications for Dymonic 100 include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors, and panels), aluminum, masonry and vinyl siding. Dymonic 100 is also an excellent choice as a fluid applied flashing material in rough opening perimeters for fenestration/window, door and curtain wall applications. View Data Sheet Benefits of Using Dymonic 100 in Your Next Project Fast Installation Tack-free in 15 mins Improved Aesthetics Available in a wide variety of colors with custom color matching options available Enhanced Aesthetics Paintable after cure Fire Rated Included in several fire rated systems Exceptional Movement High elasticity provides movement capacity of +100/-50% UV Stable Will not crack, craze or yellow under extreme UV exposure Multi-Use Interior and exterior caulking, and as a back-bedding glazing compound Dymonic 100 Is Best For Expansion and control joints Precast concrete panel joints Perimeter caulking Fluid-applied flashing Water immersion applications Use over Nudura insulated concrete forms (ICF)
$13.92
-
Tremco Dymonic® FC Cartridge
High-Performance, Fast-Curing, Single-Component, Hybrid Sealant Dymonic® FC is a high-performance, fast-curing, single-component, low-modulus, hybrid sealant, formulated with proprietary silane end-capped polymer technology. Basic Uses Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured. Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, aluminum, masonry and vinyl siding. View Data Sheet Benefits of Using Dymonic FC in Your Next Project Fast Curing ~60 minutes skin time & tack-free in 3 to 4 hr Improved Aesthetics Through low dirt pickup and a variety of standard color options to choose from Enhanced Aesthetics Paintable after cure Rapid Performance Will not green crack due to early movement Multi-Use Interior and exterior caulking, and as a back-bedding glazing compound Firestopping Code Compliant For both through-penetrations and fire-rated joints when used in accordance with a tested firestop system EIFS Friendly/h4> Approved for use with exterior insulation and finish systems (EIFS) Dymonic FC Is Best For Expansion and control joints Precast concrete panel joints Perimeter caulking EIFS Vinyl siding
$9.15
Tremco Dymonic® FC Sausage
High-Performance, Fast-Curing, Single-Component, Hybrid Sealant Dymonic® FC is a high-performance, fast-curing, single-component, low-modulus, hybrid sealant, formulated with proprietary silane end-capped polymer technology. Basic Uses Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured. Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, aluminum, masonry and vinyl siding. View Data Sheet Benefits of Using Dymonic FC in Your Next Project Fast Curing ~60 minutes skin time & tack-free in 3 to 4 hr Improved Aesthetics Through low dirt pickup and a variety of standard color options to choose from Enhanced Aesthetics Paintable after cure Rapid Performance Will not green crack due to early movement Multi-Use Interior and exterior caulking, and as a back-bedding glazing compound Firestopping Code Compliant For both through-penetrations and fire-rated joints when used in accordance with a tested firestop system EIFS Friendly/h4> Approved for use with exterior insulation and finish systems (EIFS) Dymonic FC Is Best For Expansion and control joints Precast concrete panel joints Perimeter caulking EIFS Vinyl siding
$13.92
-
E-Z LOK E-Z LOK™ - 170-006-BR Pack of 25 - E-Z Fin™ Threaded Insert for Soft Wood or Plastic - Single fin - 6-32
E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion. Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16. Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. Features Easy press-in installation Design minimizes splintering and splitting Available in 3 lengths for varying material thicknesses Applications: Soft woods: such as pine, composition board, and MDF Most Plastics Specifications E-Z Lok P/N: 170-006-BR For Use in: Soft Wood, Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Finsert Material: Brass System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.19 Drill Size: #5 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$19.32
-
E-Z LOK E-Z LOK™ - 170-008-BR Pack of 25 - E-Z Fin™ Threaded Insert for Soft Wood or Plastic - Single fin - 8-32
E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion. Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16. Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. Features Easy press-in installation Design minimizes splintering and splitting Available in 3 lengths for varying material thicknesses Applications: Soft woods: such as pine, composition board, and MDF Most Plastics Specifications E-Z Lok P/N: 170-008-BR For Use in: Soft Wood, Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Finsert Material: Brass System of Measurement: Inch Internal Thread: 8-32 External Thread: N/A Installed Length: 0.19 Drill Size: 15/64 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$18.48
-
E-Z LOK E-Z LOK™ - 170-332-BR Pack of 25 - E-Z Fin™ Threaded Insert for Soft Wood or Plastic - Single fin - 10-32
E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion. Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16. Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. Features Easy press-in installation Design minimizes splintering and splitting Available in 3 lengths for varying material thicknesses Applications: Soft woods: such as pine, composition board, and MDF Most Plastics Specifications E-Z Lok P/N: 170-332-BR For Use in: Soft Wood, Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Finsert Material: Brass System of Measurement: Inch Internal Thread: 10-32 External Thread: N/A Installed Length: 0.19 Drill Size: G Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A
$27.72
-
E-Z LOK E-Z LOK™ - 20010 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 2-56 x 1D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20010 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 2-56 External Thread: N/A Installed Length: 0.09 Drill Size: 3/32 Tap Size: 2-56 STI Minimum Full Thread Depth: 0.16 Installation Tool P/N: M1002
$8.06
-
E-Z LOK E-Z LOK™ - 20015 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 2-56 x 1.5D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20015 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 2-56 External Thread: N/A Installed Length: 0.13 Drill Size: 3/32 Tap Size: 2-56 STI Minimum Full Thread Depth: 0.16 Installation Tool P/N: M1002
$6.72
-
E-Z LOK E-Z LOK™ - 20020 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 2-56 x 2D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20020 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 2-56 External Thread: N/A Installed Length: 0.17 Drill Size: 3/32 Tap Size: 2-56 STI Minimum Full Thread Depth: 0.16 Installation Tool P/N: M1002
$9.74
-
E-Z LOK E-Z LOK™ - 20110 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 3-48 x 1D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20110 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 3-48 External Thread: N/A Installed Length: 0.1 Drill Size: #36 Tap Size: 3-48 STI Minimum Full Thread Depth: 0.18 Installation Tool P/N: M1002
$7.73
-
E-Z LOK E-Z LOK™ - 20115 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 3-48 x 1.5D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20115 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 3-48 External Thread: N/A Installed Length: 0.15 Drill Size: #36 Tap Size: 3-48 STI Minimum Full Thread Depth: 0.18 Installation Tool P/N: M1002 E-Z Lok P/N: 20115 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 3-48 External Thread: N/A Installed Length: 0.15 Drill Size: #36 Tap Size: 3-48 STI Minimum Full Thread Depth: 0.18 Installation Tool P/N: M1002
$6.38
-
E-Z LOK E-Z LOK™ - 20120 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 3-48 x 2D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20120 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 3-48 External Thread: N/A Installed Length: 0.2 Drill Size: #36 Tap Size: 3-48 STI Minimum Full Thread Depth: 0.18 Installation Tool P/N: M1002
$9.41
-
E-Z LOK E-Z LOK™ - 20210 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 4-40 x 1D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20210 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.11 Drill Size: #31 Tap Size: 4-40 STI Minimum Full Thread Depth: 0.21 Installation Tool P/N: M1004
$6.72
-
E-Z LOK E-Z LOK™ - 20215 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 4-40 x 1.5D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20215 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.17 Drill Size: #31 Tap Size: 4-40 STI Minimum Full Thread Depth: 0.21 Installation Tool P/N: M1004
$6.05
-
E-Z LOK E-Z LOK™ - 20220 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 4-40 x 2D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20220 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.22 Drill Size: #31 Tap Size: 4-40 STI Minimum Full Thread Depth: 0.21 Installation Tool P/N: M1004
$7.06
-
E-Z LOK E-Z LOK™ - 20310 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 5-40 x 1D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20310 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 5-40 External Thread: N/A Installed Length: 0.13 Drill Size: #29 Tap Size: 5-40 STI Minimum Full Thread Depth: 0.23 Installation Tool P/N: M1004
$6.72
-
E-Z LOK E-Z LOK™ - 20315 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 5-40 x 1.5D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20315 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 5-40 External Thread: N/A Installed Length: 0.19 Drill Size: #29 Tap Size: 5-40 STI Minimum Full Thread Depth: 0.23 Installation Tool P/N: M1004
$6.05
-
E-Z LOK E-Z LOK™ - 20320 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 5-40 x 2D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20320 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 5-40 External Thread: N/A Installed Length: 0.25 Drill Size: #29 Tap Size: 5-40 STI Minimum Full Thread Depth: 0.23 Installation Tool P/N: M1004
$7.06
-
E-Z LOK E-Z LOK™ - 20410 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 6-32 x 1D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20410 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.14 Drill Size: #25 Tap Size: 6-32 STI Minimum Full Thread Depth: 0.26 Installation Tool P/N: M1005
$6.72
-
E-Z LOK E-Z LOK™ - 20415 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 6-32 x 1.5D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20415 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.21 Drill Size: #25 Tap Size: 6-32 STI Minimum Full Thread Depth: 0.26 Installation Tool P/N: M1005
$6.05
-
E-Z LOK E-Z LOK™ - 20420 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 6-32 x 2D C
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20420 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.28 Drill Size: #25 Tap Size: 6-32 STI Minimum Full Thread Depth: 0.26 Installation Tool P/N: M1005
$7.06
-
E-Z LOK E-Z LOK™ - 20510 Pack of 10 - E-Z Coil™ Threaded Insert for Metal - 8-32 x 1D
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place. Features Quickly repair damaged threads in soft metal Protect tapped holes from stripping and wear Made from corrosion resistant 18-8 stainless steel Applications: Soft metals: aluminum, cast iron, magnesium, etc. Specifications E-Z Lok P/N: 20510 For Use in: Metal Specific Material Use: N/A Sub-Category: Standard Coil Style: Coil Material: Steel - Stainless System of Measurement: Inch Internal Thread: 8-32 External Thread: N/A Installed Length: 0.16 Drill Size: 11/64 Tap Size: 8-32 STI Minimum Full Thread Depth: 0.29 Installation Tool P/N: M1006
$6.72
